PDA

View Full Version : DM 500 sau DM 7020 sau DM 7025 ?



me1960
09-12-08, 18:11
Quick and dirty guide to Dreambox
I just went through the "experience" of choosing, buying and installing a Dreambox. The results are fantastic, but it takes some courage to embark in this adventure, so here is my quick guide for the faint hearted or the Linux-impaired.

I left out some of the fancier stuff like FTPing files and so on, but with the setup below you can do everything!

If you want a much more detailed excellent how-to guide, go to h-t-t-p://w-w-w.klona.4t.com/v3.1/guide_eng/dbox-howto.htm ; if you want to keep it simple read on here.

Why Dreambox 7020?
==================

First, you no longer need to play around with expensive CAM modules and smart cards and programmers. Finished.

Second, you can record TV material direct to disk. Either an internal disk (not recommended) or one on a PC connected to the Dreambox by LAN.

Third, it is fairly well built, has a good tuner, features all the things you find on a normal receiver plus a LAN connection, a USB port, a digital output, a modem port, a CF slot, a CAM slot, two smartcard slots. It does have some weaknesses, especially on the HDD and USB ports, but these can be dealt with, the other advantages outweigh these problems and there are workaround solutions.

Fourth, it is constantly evolving and benefits from the support of hundreds of bits of software and files from a large community of developers.

And many more important features described below.

Which Dreambox, 500, 7020 or 7025?
==================================

Just ask any dealer how many boxes he gets returned for repairs. With 500 and the brand new 7025, more than half the boxes have an elastic band attached ;-) OTOH, almost no problems are reported with the recent "series 3" 7020. So go for that one! The 500 price is attractive but spare yourself the grief. Start off with a disk-less 7020 box, get used to it for a while, then once you have it working in a stable way you can think of recording, but the internal disk may NOT be the best bet. Anyhow, if you do put a disk in, ONLY install Maxtor disks, all the other major brands have problems working in Dreambox. But you will do much better recording to your PC's disk, this will avoid installation of HD in the Dreambox and you can more easily transfer to DVD this way.

What is an image?
=================

An image in Dreambox lingo is firmware. Firmware is the software that gets loaded in the receiver, including an operating system, and that makes it behave the way it does, receiving TV stations and responding to your remote control.

Is the original preloaded image not good enough?
================================================

Dreambox comes preloaded with a basic Linux-based image for doing just that. So why do I need a new image? With the preloaded image you will only be able to use the Dreambox for conventional stuff like receiving FTA channels, or subscription channels using a CAM and a card, like most receivers do.

There are better images available that will allow you to do more with less, more or less, or something like that.

While there are many good images around, most people find that right now the most useful and up-to-date one is Gemini. By adding the Gemini image you can do many new things, such as downloading directly from internet all kinds of useful files, including extra features, add-ons, EMUs (emulators that behave like the plugin CAM modules) and settings files, utilities, configurators, even something called keys (you will no longer need a key to get into your house or car). Once installed, all these great Gemini features are accessible from the remote control using the blue button.

What do you need to get started?
================================

- a PC
- a good broadband internet connection using a router,
- a local area network (LAN) with an Ethernet cable to connect your router to the Dreambox, and
- a USB Stick.

USB stick
=========

You definitely need one, you could load images on the onboard flash memory, but you take a big chance doing that, and you will quickly run out of space; don't risk messing up the local flash memory, you don't want to send the box back to the shop. You also dont want to put images on a hard disk. USB stick works, it is safe. An alternative might be a CF card, procedure is almost identical.

Not all USB sticks work, the Dreambox is very picky about anything you stick into it... Check the list on the forum for compatible devices: http://67.43.4.157:81/showthread.php?t=109048

Pick a USB stick with at least 128M capacity, a 64M will not allow you to correctly install Gemini image.

LAN
===

Never mind the serial cable, you will never need it, and if you use it you risk messing things up. Use the LAN, connect an Ethernet cable to your computer (using your hub/router). The recent 7020 models have DHCP, contrary to everything that is said in the manuals. This is the easiest to set up, but your address may vary every time you boot, so you need to check the assigned address to connect.

Software
========

With an "open" Linux box like Dreambox the number of available or necessary software bits is incredible, and for that reason you may spend a lot of time trying stuff only to find out there is a simpler way. After hours of fiddling, and with the help of the guys on the forum, I now have a good setup, and here is my advice.

All you need is the following software, downloadable on Toecutter or on the net:

- Gemini image, most recent version (270 at time of writing), make sure it is the version for Dreambox 7020
go to http://www.satdudez.org/forum/showthread.php?t=29101
- DreamboxEdit settings editor, most recent version (1.9 at time of writing)
go to h-t-t-p://dreambox.happyllama.com/
- FlashWizard Pro programmer for Dreambox, most recent version (6.3 at time of writing, no longer requires DreamFlash)
go to http://www.satdudez.org/forum/showthread.php?t=29178
- Satellite channel settings file, I use pet123 Dream Settings, go to h-t-t-p://w-w-w.rdi-***.com/uploadshow.php?id=6

Anything else, like EMUs, Cams, scripts can be downloaded through the Dreambox so don't bother downloading to PC.



Getting started
===============

So, you have taken care of the shopping list above, and you have downloaded the software. Your dish is set up properly, and you are ready to go.

Insert your USB Stick, connect the Dreambox 7020 to the antenna coax, to the LAN through Ethernet cable, and to the mains 240V ac.

Turn the box on, wait for the boot, you will be prompted to enter some basic settings like time etc.. If necessary use the remote control go to MENU and pick Setup (4 over to the left), then System Settings to adjust time.

Set up the Dreambox for your particular antenna and LNBs: from MENU pick Setup > Service Searching > Satellite Configuration, and pick your situation, you can have one satellite (one LNB), two or four satellites using DISEqC switch for multi-LNB antennas, or "many satellites via DISEqC rotor"; for a motorized antenna, I do not recommend the cheap DISEqC rotors like Stab or Nokia H.H, if you want motorized go for the real thing using a polar mount, a motorized jack actuator and a DISEqC 1.2 positioner like the Aston DS-200, the entire setup will cost you under 150 Euro, not much more than a crappy H-H rotor. You can control your positioner using these setup menus.

Set up IP address for Dreambox: Use the MENU button, go to Setup > Expert Setup > Communication Setup and make sure you have DHCP and LAN selected. If you make changes, reboot by going to MENU > Shutdown > Restart and wait for reboot, then go back to Communication Setup and check out the IP address, it will be something like 192.168.0.8, write it down.

Check connection to LAN: go to your PC and from your browser (cool people never use Internet Explorer and only use Firefox) enter a URL using "http://" followed by the address you wrote down in the previous step (in the example, h-t-t-p://192.168.0.8), if you have everything setu up correctly you will get a Dreambox screen showing the channel settings, you can use this to control the Dreambox, much like the remote control.

Load satellite settings: start DreamboxEdit, open the pet123 file you downloaded earlier, you will see all the channels listed on the big window on the left, and all the bouquets listed on the right hand window. The middle window shows the contents of each bouquet as you click on it on the right window. You can modify the contents, deleting channels or adding them (right click). What I do is create a few of my own custom bouquets of favourites, more or less one per satellite, and move them to the top of the list for easy access, then I drag my favourite channels from the various bouquets into my own favourites. Anyhow you can edit later, to start with just use the file as is, you can go back later and change it and reload.

Press Options, under the first Profiles tab enter the IP address of your Dreambox, then go to Advanced tab and tick "Display Reboot Dreambox option on FTP screen". Click the Save button and now press the FTP button. Press the "Send files to Dreambox" button, this puts the various files onto temporary storage in the Dreambox, then press "Reload settings on Dreambox" to get the settings activated, this takes a while so be patient, once it confirms that it is done, press "Reboot Dreambox".

Check reception: once rebooted, you should be able to use your remote control to change channels (use the UP and DOWN arrows to get the channels list page, use the blue button to pick the bouquet, then pick channel). Check reception is OK on FTA channels. You are now using the original image (firmware) of the Dreambox.

Prepare to load a new image into the Dreambox's USB Stick: Start FlashWizard Pro and go to the lower Configuration and Utilities button, under IP enter the IP address again (in the example, 192.168.0.8) and under "Device to use (Multiboot)" tick USB. Might as well check for updates with the button on the lower right.

Format and mount your USB stick: under Utilities, do a Format USB, and then Mount USB. If something goes wrong, your USB stick may not be compatible.

Install the Gemini image: Now go to "Install or remove a firmware in MULTIBOOT" using the middle button on the left. Tick "Smart settings copy from active image" so the previously loaded settings will work when you boot on Gemini, and tick "Set new image as default choice on FlashWizard Pro boot menu" so by default the Dreambox will boot Gemini. Press the folder button on the right and look for your Gemini 270 file. When you pick the Gemini file and confirm, the image will be sent to the USB key in your Dreambox, and your Dreambox will reboot.

At reboot, wait for it as it is quite slow, you will get a prompt to boot either the original DB 7020 Flashimage 2.60 or the Gemini 270 image, with the menu by default on the latter, so press OK. If you do nothing, after a certain delay the machine will boot what you set as the default image (Gemini). At first things will look just like before, except that the blue button now brings up some new important features in something called the Blue Panel.

Congratulations, you now have a very powerful satellite receiver capable of some magic things.

Enabling the magic
==================

First, load an EMU so you can avoid using CAM modules. The best one is called "camd", go to the Blue Panel (use blue button) pick Addons, go to "download and install" and pick "cam", choose the latest Camd (at time of writing, 3.838a) and confirm.

Second, load the configuration file for Camd. Go to the Blue Panel (use blue button) pick Addons, go to "download and install" and pick "cam-config", choose "Camd3 Config" and confirm.

Third, load the camd keys, these are used to replace your house keys and your car keys, as mentioned before. Keyless locks I think they call them. Go to the Blue Panel (use blue button) pick Addons, go to "download and install" and pick "keys", choose "Camd3 Keys" and confirm.

Fourth, set the automatic key updater. You may find that the locks on your front door or in your car get changed often, so in order to avoid having having the surprise of finding that your keys no longer open the door or start your car, use this feature.
To load the updater, go to the Blue Panel (use blue button) pick Addons, go to "download and install" and pick "cam-plugins", choose "AES camd3_online_updater" and confirm.
Now run the updater script, use blue button, go to System Info, User Script, pick "aes_camd3_online_updater". You must set the sleep time to 5 seconds, or the system will not have time to do the update. Use 7 seconds if necessary.

Fifth, start the cam, from the Blue Panel use the green button.

Enjoy!

Especially if you have more than one cam, you can set up the auto-cam feature, this is useful if you have many bouquets requiring different cams. Personally I use only one, but some bouquets are picky. You can set the name of the cam that will be loaded for each bouquet. From the Blue Panel press the red button, set the default cam (example, camd), this will be used unless otherwise specified by the procedures below.

If you need to assign special cams (emulators or even physical plugin CAMs) to a bouquet or even to a specific channel, go to that bouquet or channel and from the Blue Panel press the red button, pick the new cam in "Set new Cam", and assign it by pressing green button "add(pr)" to assign cam to that bouquet (Provider) or yellow button "add(ch)" to assign cam to that channel.

That's it!

Snow
09-12-08, 18:24
Ar fi mult mai interesant daca le-ai pune traduse.*

P8M1C0
09-12-08, 18:36
Google translate e bine???


Rapid şi murdar ghid pentru Dreambox
Am fost prin "experienţă" de a alege, achiziţionarea şi instalarea unui Dreambox. Rezultatele sunt fantastice, dar este nevoie de ceva curaj pentru inscrierea in această aventură, aşa că aici este meu ghid rapid pentru a slăbit inima sau Linux-insuficienţă.

Am lăsat nişte amator de chestii de genul FTPing fişiere şi aşa mai departe, dar cu configurare de mai jos puteţi face totul!

Dacă doriţi o mult mai detaliate, cum excelent de a-ghid, du-te la http://www.klona.4t.com/v3.1/guide_eng/dbox-howto.htm; dacă doriţi să păstraţi-l simplu citit pe aici.

De ce Dreambox 7020?
==================

In primul rand, nu mai aveţi nevoie pentru a juca in jurul CAM scump cu module şi carduri inteligente şi programatori. Terminat.

In al doilea rand, puteţi inregistra TV direct de materiale pentru a-disk. Fie un disc (nu este recomandat) sau unul de pe un PC conectat la Dreambox de reţea de tip LAN.

In al treilea rand, este destul de bine construit, are un tuner bun, caracteristici de toate lucrurile pe care le găsiţi pe un receptor normal, plus o conexiune LAN, un port USB, o iesire digitale, un port de modem, un CF slot, un slot de CAM, două card cu memorie sloturi orare. Ea are unele puncte slabe, in special pe HDD şi porturi USB, dar acestea pot fi tratate, de alte avantaje depăşesc aceste probleme şi soluţii există soluţie.

In al patrulea rand, este constant de evoluţie şi beneficiază de suport din sute de bucăţele de software şi fişiere dintr-o mare comunitate de dezvoltatori.

Si mai multe importantă caracteristicile descrise mai jos.

Care Dreambox, 500, 7020 sau 7025?
==================================

Doar intreb cum orice comerciant de multe Dulapuri cu el devine returnate pentru reparaţii. Cu 500 de brand şi noi 7025, mai mult de jumătate din cutii au o banda elastica ataşat ;-) OTOH, aproape nu sunt raportate probleme cu recentele "Seria 3", 7020. Deci, merg pentru că unul! Preţul este de 500 de atractiv, dar vă scuteşte de durere. Incep cu un disc-7020 caseta de mai puţin, te obişnuieşti cu el pentru un timp, apoi, o dată ce-l au de lucru intr-un mod stabil, vă puteţi gandi la inregistrare, dar interne de disc nu poate fi cel mai bun pariu. Oricum, dacă nu pune un disc de la, numai instala discurilor Maxtor, toate celelalte marci au probleme majore de lucru in Dreambox. Dar te va face mult mai bine de inregistrare a PC-ului de disc, aceasta va evita instalarea de HD in Dreambox şi puteţi mai uşor de transfer pentru a DVD-ului in acest mod.

Ce este o imagine?
=================

O imagine in Dreambox limbă străină este de firmware. Firmware este software-ul care se incarcă in receptor, inclusiv un sistem de operare, care vă comporta la fel se intamplă acest lucru, care beneficiază de posturi de televiziune şi de răspuns la telecomanda.

Este original preincărcate imagine destul de bun, nu?
================================================

Dreambox preincărcate vine cu o bază de Linux bazată pe imagine pentru a face doar asta. Deci, de ce nu am nevoie de o nouă imagine? Cu preincărcate imagine te vor putea fi utilizaţi pentru Dreambox convenţionale de chestii de genul care beneficiază de canale de zone de liber schimb, subscriere sau de canale, folosind un CAM şi o carte, face ca cele mai multe receptoare.

Nu sunt imagini disponibile mai bine care vă va permite să facă mai mult cu mai puţin, mai mult sau mai puţin, sau ceva de genul asta.

In timp ce există multe imagini de bine pe aici, majoritatea oamenilor găsi că acum cel mai util şi pană la data de unul este Gemeni. Prin adăugarea de Gemeni imagine pe care le puteţi face multe lucruri noi, cum ar fi descărcarea de internet direct de la toate tipurile de fişiere de utile, inclusiv caracteristici in plus, programele de completare, EMUs (Emulatoarele de care se comporte ca plug-in-ul CAM module) şi setările de fisiere, utilitare, configurators , Chiar şi ceva numit chei (nu vor mai ai nevoie de o cheie pentru a ajunge in casa ta sau cu masina). Odată instalat, toate aceste caracteristici de mare Gemeni sunt accesibile de la control de la distanţă utilizand butonul albastru.

Ce ai nevoie pentru a incepe?
================================

- Un PC
- O bună conexiune la internet in bandă largă, folosind un router,
- O reţea locală (LAN) cu un cablu Ethernet pentru a vă conecta la router Dreambox, şi
- Un USB Stick.

Stick USB
=========

Aveţi nevoie de unul cu siguranţă, ai putea incarca imagini pe memorie flash la bord, dar ai face o mare şansă de a face asta, şi vă va fugi repede din spaţiu; nu risc o tragi pană locale de memorie flash, nu doriţi să trimite caseta inapoi la magazin. Puteţi, de asemenea, Nu vreau să pun imagini de pe un hard disk. USB Stick de lucrări, care este sigur. O alternativă ar putea fi o carte de CF, procedura este aproape identic.

Nu toate memoriile USB de lucru, de Dreambox este foarte pretentios despre orice băţ in el ... Verificaţi lista de pe forum pentru dispozitive compatibile: http://67.43.4.157:81/showthread.php?t=109048

Alege un USB Stick cu capacitatea de cel puţin 128M, un 64M nu va permite să instalaţi corect Gemeni imagine.

LAN
===

Nu mai contează de cablu serial, va fi niciodată nevoie de el, şi dacă ai folosi-o să risc incurcaţi lucrurile. Utilizaţi LAN, conectaţi un cablu Ethernet la computerul dvs. (utilizand tale hub / router). In ultimii 7020 de modele au DHCP, contrar a tot ceea ce este spus in manuale. Aceasta este cea mai uşoară de a crea, dar poate varia adresa dvs. de fiecare dată cand efectuaţi boot, deci aveţi nevoie pentru a verifica adresa de server pentru a vă conecta.

Software
========

Cu un "deschis" Linux ca Dreambox caseta de numărul de disponibil sau de software-ul necesar este incredibil de biţi, şi din acest motiv, aţi putea petrece mult timp incercand lucruri numai pentru a afla de acolo este un simplu mod. După ore de tampit, şi cu ajutorul unor baieti de pe forum, acum am avea un setup bun, şi aici este sfatul meu.

Tot ce este nevoie de următoarele produse software, descarcate de pe Toecutter sau de pe net:

- Gemeni imagine, cea mai recentă versiune (270 la timp de scris), asiguraţi-vă că acesta este versiunea pentru Dreambox 7020
du-te la http://www.satdudez.org/forum/showthread.php?t=29101
- DreamboxEdit setările de redactor, cea mai recentă versiune (1,9 la timp de scris)
du-te la h-T-T-p: / / dreambox.happyllama.com /
- FlashWizard Pro programator pentru Dreambox, cea mai recentă versiune (6,3 la timp de scris, nu mai necesită DreamFlash)
du-te la http://www.satdudez.org/forum/showthread.php?t=29178
- Prin satelit fişier de setări de canal, am folosi pet123 Dream Setări, du-te la http://www.rdi- ***. ro / uploadshow.php? Id = 6

Orice altceva, ca EMUs, Cams, script-urile pot fi descărcate prin intermediul Dreambox asa ca nu deranjez de a descărca PC-ul.



Noţiuni de bază
===============

Deci, ai avut grijă de cumpărături lista de mai sus, şi le-aţi descărcat software-ul. Antena de satelit de dvs. este configurat corespunzător, şi sunteţi gata de plecare.

Introduceţi-vă USB Stick, Dreambox 7020 a conecta antena de a obţine, la LAN prin cablu Ethernet, magistrale şi de la 240V CA.

Porniţi de pe caseta, aşteptaţi de boot, vi se va cere să introduceţi unele setări de bază, ca de timp etc. Dacă este necesar utilizarea de control la distanţă pentru a merge MENU şi alegeţi programul de instalare (4 la stanga), apoi Setări de sistem pentru a ajusta timp.

Configuraţi-vă in special pentru Dreambox antenă şi LNBs: MENIU alege de la instalare> Serviciul de cautare> prin satelit de configurare, alege şi de situaţia dvs., puteţi avea una de satelit (o LNB), două sau patru sateliţi, folosind comutatorul DiSEqC LNB pentru multi-antene, sau "de multe DiSEqC rotor prin sateliţi"; motorizat pentru o antena, eu nu recomandăm ieftine DiSEqC rotoare ca lovitură de cuţit sau Nokia HH, dacă doriţi să mergeţi motorizat pentru lucru real, folosind un polar de montare, un actuator Jack motorizate şi un DiSEqC 1.2 Aston positioner ca DS-200, intreaga instalare va costa sub 150 de euro, nu de mult mai mult decat un rotor HH nasol. Puteţi să vă controlaţi positioner folosind aceste meniuri de configurare.

Configuraţi adresa IP pentru Dreambox: Utilizaţi butonul MENU, du-te la Setup> Expert Setup> Comunicare de instalare şi asiguraţi-vă că aţi selectat DHCP şi LAN. Dacă aţi făcut modificări, de a reporni, va Meniu> Shutdown> Reporniţi şi aşteptaţi pentru a reporni, apoi reveniţi la programul de instalare de comunicare şi verificaţi adresa de IP, va fi ceva de genul 192.168.0.8, scrie-l jos.

Verificaţi conexiunea la reţea de tip LAN: du-te la PC şi de la browser-ul dvs. (misto oamenii nu utilizează Internet Explorer şi numai utilizarea Firefox) introduce un URL-ul, folosind "http://", urmat de adresa pe care aţi scris-jos la pasul anterior (de exemplu in , Http://192.168.0.8), dacă aveţi tot setu corect, veţi obţine o Dreambox ecran care indică setările de canal, se poate utiliza pentru a controla acest Dreambox, de mult ca de control la distanţă.

Incarca setarile de satelit: incepe DreamboxEdit, deschide pet123 mai devreme care l-aţi descărcat fişierul, veţi vedea toate canalele enumerate de mare de pe fereastra din stanga, şi toate buchete listate pe mana dreaptă fereastra. Mijlocul ferestrei arată conţinutul de fiecare buchet ca-l faceţi clic pe dreapta pe fereastra. Aveţi posibilitatea să modificaţi conţinutul, ştergerea sau adăugarea lor de canale (click dreapta). Ceea ce fac este de a crea cateva din propriile mele favorite din comandă buchete, mai mult sau mai puţin cate unul pe fiecare satelit, şi de a le muta in partea de sus a listei de acces uşor, apoi mi-am trage meu preferat de la diferite canale de buchete in propriul meu favorite. Oricum puteţi să editaţi mai tarziu, pentru a incepe să utilizaţi doar cu fişierul este ca, puteţi reveni mai tarziu şi il modificaţi şi reincărcaţi.

Apăsaţi Opţiuni, in conformitate cu primul Profile fila introduce adresa IP a dvs. Dreambox, apoi mergeţi la fila şi bifaţi "Reporniţi Dreambox opţiune de afişare pe ecran FTP". Faceţi clic pe butonul Salvare şi acum, apăsaţi butonul de FTP. Apăsaţi pe "Trimite fişierele de la Dreambox" buton, aceasta pune pe diferite fişiere de stocare temporară in Dreambox, apoi apăsaţi "Reincărcare setările de pe Dreambox" pentru a obţine setările activat, in timp ce aceasta ia o fi atat de pacient, după ce confirmă faptul că este terminat, apăsaţi "Reporniţi Dreambox".

Receptie verificarii: Odată repornit sistemul, ar trebui să puteţi utiliza telecomanda pentru a schimba canalele (utilizaţi săgeţile in sus şi in jos pentru a obţine lista de canale de pagină, utilizaţi butonul albastru pentru a alege buchet de flori, apoi alege canal). Receptie verificarii este OK pe zone de liber schimb canale. Utilizaţi, acum de imagine original (firmware) de la Dreambox.

Pregătiţi pentru a incărca o nouă imagine in Dreambox a USB Stick: Start FlashWizard Pro si merge la mai mici de configurare şi Utilităţi buton, in conformitate cu IP introduceţi din nou adresa de IP (de exemplu, 192.168.0.8) şi in "Device pentru a utiliza (multiboot) "Tic USB. S-ar putea, de asemenea verifică actualizările cu buton de pe dreapta jos.

Format şi mount-eze USB Stick: sub Utilităţi, nu un format USB, apoi pe muntele USB. Dacă ceva merge greşit, vă USB Stick-ar putea să nu fie compatibil.

Instalaţi Gemeni imagine: Acum du-te la "Instalaţi sau elimina un firmware in multiboot" folosind butonul de mijloc din stanga. Bifaţi "Smart setările de imagine copie de la activ" atat de incărcate anterior in setările de muncă, atunci cand va boot-aţi de pe Gemeni, şi bifaţi "set nou de imagine in mod implicit alegerea pe FlashWizard Pro meniul de boot" in mod implicit, atat de Dreambox va boot-Gemeni. Apăsaţi pe butonul de folder de pe dreapta şi căutaţi-vă Gemeni 270 de fişiere. Cand alege şi de a confirma dosar Gemeni, imaginea va fi trimis la USB-cheie in Dreambox-vă, şi vă Dreambox va reporni.

La repornirea sistemului, aşteptaţi-l ca este destul de lent, veţi primi un prompt de boot să fie original DB 7020 Flashimage 2.60 Gemeni sau de 270 de imagine, cu meniul in mod implicit, pe acesta din urmă, deci apăsaţi OK. Dacă veţi face nimic, după o anumită intarziere, va boot-a maşina ce-ai setat ca implicit imagine (Gemeni). La prima lucruri vor arăta la fel ca inainte, cu excepţia faptului că butonul albastru pană acum aduce unele caracteristici noi de important in ceva numit Blue Panel.

Felicitări, acum au un foarte puternic receptor de satelit capabil de unele lucruri magice.

Activarea de magie
==================

In primul rand, o incărcătură UEM, aşa incat să puteţi evita folosind modulele de CAM. Pe cel mai bun este numit "camd", mergeţi la Panoul de Blue (folosiţi butonul albastru) alege Addons, du-te la "descărca şi instala" şi alegeţi "CAM", alege cele mai recente Camd (la ora de scris, 3.838a) şi de a confirma .

In al doilea rand, se incarcă fişierul de configurare pentru Camd. Du-te la Blue Panel (folosiţi butonul albastru) alege Addons, du-te la "descărca şi instala" şi alegeţi "CAM-config", alegeţi "Camd3 Config" şi confirmaţi.

In al treilea rand, sarcina de camd cheile, acestea sunt folosite pentru a inlocui casa ta şi cheile cheile de la maşină, după cum am menţionat anterior. Keyless blochează Cred că apelul lor. Du-te la Blue Panel (folosiţi butonul albastru) alege Addons, du-te la "descărca şi instala" şi alegeţi "cheile", alegeţi "Camd3 Taste" şi confirmaţi.

In al patrulea rand, setaţi automat updater cheie. Puteţi găsi că blochează de pe uşa de la intrare sau in primi masina ta a fost schimbat de multe ori, asa ca, pentru a evita avand avand surpriza de a găsi că cheile nu mai deschide usa sau a porni maşina dumneavoastră, utilizaţi această caracteristică.
Pentru a incarca updater, mergeţi la Panoul de Blue (folosiţi butonul albastru) alege Addons, du-te la "descărca şi instala" şi alegeţi "CAM-plugins", alegeţi "AES camd3_online_updater" şi confirmaţi.
Acum, rulaţi scriptul de updater, utilizaţi butonul albastru, du-te la Sistemul de Informaţii, Script de utilizator, alegeţi "aes_camd3_online_updater". Trebuie să setaţi dormi timp de 5 secunde, sau sistemul nu va mai avea timp de a face actualizarea. Utilizaţi 7 secunde, dacă este necesar.

In al cincilea rand, de a incepe CAM, de la Blue Panou de utilizare butonul verde.

Se bucura!

Mai ales dacă aveţi mai mult de un CAM, puteţi să setaţi de auto-CAM facilitate, acest lucru este util dacă aveţi mai multe buchete care necesită diferite cams. Personal am folosi doar una, dar unele sunt buchete jalnic. Aveţi posibilitatea să setaţi numele de CAM, care va fi incărcat pentru fiecare buchet. De la Blue Panou apăsaţi butonul de culoare roşie, CAM seta implicit (de exemplu, camd), acesta va fi folosit cu excepţia cazului in care se specifică altfel de procedurile de mai jos.

Dacă aveţi nevoie pentru a atribui speciale cams (Emulatoarele sau chiar fizice CAMs plug-in-ul) de un buchet de flori sau chiar la un anume canal, du-te la acest buchet de flori sau de canal şi de la Blue Panou apăsaţi butonul de culoare roşie, alege noul CAM in "nou set de Cameră ", Şi-l atribuie, apăsand pe butonul verde" adăugaţi (PR) "pentru a atribui ca buchet de a CAM (furnizor) sau galben butonul" adăugaţi (CH) "pentru a desemna cam la acel canal.

Asta e!

Snow
09-12-08, 18:56
Google translate e bine???




Hmm, in sine n-am probleme cu limba engleza. Google translate daca-ti citesti traducerea postata ai sa vezi cat e de grozav.

O parte din articolele postate la utile, vor pleca la dreambox general
http://sateliti.info/forumdisplay.php?f=68
Aici este o sectiune de limba romana, pentru limba engleza pot fi postate aici

http://sateliti.info/forumdisplay.php?f=41

zmeura
09-12-08, 21:54
Asta cam asa e,cei care aveti aceste receptoare va puteti ajuta de Google Translate dar stiind despre ce e vorba incercati sa aduceti corecturile necesare pentru a se intelege ceva.Stiu ca e nevoie de timp dar poate fi de folos pentru cei care chiar nu stiu engleza.
Atfel e aiurea sa postam in engleza la sectiunile ro cat timp avem sectiune in engleza.Nu are nimeni pretentii pentru traduceri perfecte,doar sa fie inteligibile.Stiu ca avem unele exceptii pe la Ipbox si Kathrein,dar acolo lucrurile sunt la inceput si sectiunile sunt vizitate de catre straini.