View Full Version : Imagini DM 500
The Original Enigma1 PLi® Jade Final suite contains the following images:
* PLi®-Jade-DM500
* PLi®-Jade-DM500-MaxVar
* PLi®-Jade-DM500-Old-Framebuffer
* PLi®-Jade-DM500-MaxVar-Old-Framebuffer
[Old-Framebuffer: only needed if you have a greenish OSD when using the normal DM500 software, if in doubt use the standard DM500 software]
* PLi®-Jade-DM500Plus
* PLi®-Jade-DM56x0
* PLi®-Jade-DM600
* PLi®-Jade-DM7000
* PLi®-Jade-DM7020
See below for what's new & fixed since the initial PLi® Jade RC release
Highlights:
- Satellite.xml split in Ka, Ku, C, S, L band
- Remote control behaviour reverted to pre-Jade
* (Some remotes suffered from very bad reception in the Jade RC)
- North America scan fix by Updatelee
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout!
* ('Var' partition is erased when the layout changes)
- Rotor improvement for the OpenEmbedded (OE) boxes
Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository September 29th 2008
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout
* ('Var' partition is erased when the layout changes)
- Enigma Movieplayer fixed by ims
- Default sleeptimer now 30 minutes
- Insert and delete character support for DM500 remotes (Red and Green)
* Now Red (delete) en Green (insert) can be used.
* For all other boxes Vol+/Vol- and Red/Green can be used - it does not care...
- Remote control behaviour restored to pre-Jade
- Fixed 'DM7000 style' remote control for DM500
* (Added the ability to use the DM600, 7000, 7020 large remote on your DM500, DM56x0)
- Show serviceselector again with TV/RADIO key, but only if the mode already was TV resp. RADIO.
* Toggling TV/RADIO doesn't bring up the service selector
- Timeshift delay input value limited to 999 instead of 60 seconds
- Timeshift / recording support for DM500+ (settings equal to DM600)
- Rotor improvement for the OpenEmbedded (OE) boxes
* (Smooth start and faster rotating at 18 V, motor stop detection improved)
Plugins:
- Bitrate plugin fixes for NTSC
PPanel:
- Channelsetting reload in PPanel fixed
EPG Features:
- Use audio key for searchEPG in EPG channel
OSD Features:
- OSD transparancy setting in smaller steps for DM500+ and DM600 (5 instead of 25)
Web Interface Fixes:
- Some info in WebIf missing for IE fixed by ims
Network:
- Enable network and DHCP as default in case the Enigma config is not copied from /Var_init
* May fix some move /Var to network issues
- Do NOT add manually created mounts to the Enigma mount.conf
* It can cause double mounts if such a mount was already done in /Var/etc/init
Highlights DM500 MaxVar:
We've created 1Mb extra /Var space for you...
The removed items are now available via the PLi® downloads at the Software Management
We rebuilt the internal Flash tool completely!
So now you can flash back and forward between the standard PLi DM500 images and the PLi DM500-MaxVar images without using the serial cable!!!
We advise you to use the 'root.cramfs' method for this!
See the url below on how to Flash your DM500 via the 'root.cramfs' method:
See our DM500 Installation Wiki...
Moved to Software Management downloads:
- MV EPG plugin, Mediapli_8 skin, CCcam SoftCam, Cables/Terrestrial.xml, Translations, Games, traceroute, nslookup, IPtables, Netfilter drivers
Further:
- Thanks to Updatelee for North America scan fix
Thanks to the PLi testers for several fixes and features
Support:
- Online update support (IPKG feed) for OpenEmbedded boxes
* (DM500Plus/DM600/DM7020)
- Global satellites.xml updated September 29th 2008
* (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal; DVB-S2 can't handle auto-FEC)
- Satellites.xml split in Ka, Ku, C, S, L band
See our PLi® Wiki... (http://www.pli-images.org/modules/wiki/index.php?wakka=HomePage)
Further, our Pli member Jonc created a Wikipedia Tool and PDA WYSIWYG Desktop Application for the PLi Dreambox images
If this DM500 version proves all OK, he will put the other Wikipedia Tools and PDA WebIf version online for the DM56x0, DM500+, DM600, DM7000, DM7020 and the limited E2 wiki.
http://www.pli-images.org/downloads.php?cat_id=11&download_id=56
Nabilosat DarkStar II E1
For dm500
What is new in this DarkStar II DM500 ?
Updated CVS: 30 August 2008
The image has been completely recoded based on the latest CVS
Updated Skin by porto
New DarkStar II skin customized by porto
Enigma 1 Integrated 8 Days Sky IT EPG
Download 8 days Sky IT EPG, and have it integrated to Enigma1
EPG Event Search
Select a single channel EPG, press 0, enter a keyword and search for your preferred events
EPG Channels Selection
Customize the list of EPG channels to download.We reccomend to restart Enigma upon completing the selection
EPG Channels Update List
Update the EPG channels list when there are changes
Standby after reboot
Your DM will automatically standby after an accidental reboot, such as after a powercut
Scheduled Reboot
Schedule an automatic daily reboot
Network fix
This feature is for DM7020 versions
Updated OpenVPN Kernel Module
The OpenVPN module has been updated. Fully included in DM7020.
Warning Do not download the OpenVPN plugin from the Yellow Panel to DM7020
Main Function Keys
Button 1xOK = Light Info OSD
Button 2xOK = Extra Info OSD
Button Blue = Nabilo Blue Panel
Button 2xBlue = Nabilo Extra Settings
Button Yellow = Nabilo Yellow Panel - Plugins List
Button 2xYellow = Nabilo Yellow Panel - Addons Manager
Button Red = Current Channel EPG
Button 2xRed = Select Channel EPG or MultiEPG
Features
Addons
Dedicated Addons Server
Download and install additional packages from Nabilosat server
Infobar/OSD
Enigma1 Analogic Clock
Channel Orbital Position
Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, AGC, BER
Infobar Picons
Advanced EMU information
Nabilo Panels features
1) Blue Panel
Extra Settings
Swap File Settings
Inadyn
Hard Disk Settings
Nabilo EPG Settings
Nabilo OSD Preferences
Nabilo Scheduler
----------------------
Network Services Panel
NFS Server Panel
Mount Points
System Info
Dreambox
Mount Points Info
Process Info
Memory Info
----------------------
Enigma Setup
Bitstream
Save
Select/Start/Restart EMU
2) Yellow Panel
Forums
Shoutbox
Addons
Scripts
Addons Download Manager
Manual Install Panel
Addons Uninstall Panel
Images Uninstall Panel
----------------------
Nabilosat Statistics
Many thanks to the Beta Testers Team
Black33, ^^Corrado^^, ^^Maximo II^^, greg, Matrix10, Porto, ^)0(^Nabilo^)0(^, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, frimmino, astemio, DeepDiver
Credits
Sky IT Epg fully integrated to Enigma 1 by the great MaxZ4.
Many Thanks to lukkino (VDR-Italia) for opentv source code.
http://www.dreambox.it/news/view.php?id=7098
PLI-Jade latest
fully installed to work with:
Gbox2.1b
CcCam 2.0.11 (latest)
Both emulators can be working together
Gbox Share Center 1.50 added
Stable and fast sharing
Note: the file should be sent to your DM500S via Flashwizard
download :
http://fbx.ro/fzccdqirnhloga9o
SifTeam 1.9.3C 500MV vom 19.12.08
DB500:
Usable to flash
* Enigma of: 18.12.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
ALL DECODER ( same options not present to Qbox-one
- IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
* 1 x BLUE = Emu Panel
* 1 x Yellow = Plugins
* 1 x Green = Addons Panel
* 1 x Red = EPG ( settable from Control Pannel )
* BLUE > 1 sec = Control Panel ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin ( settable from Control Pannel )
* Green > 1 sec. = Personal Plugin ( settable from Control Pannel )
Features:
* Advanced MINICROND system configuration, with more script
added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration
(have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration
(have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to install
online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button is modifiable
from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have manage
remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control
Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add one
plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for save one dir.
to extern support)
* Advanced SAMBA with graphics start/stop/configuration (7020 - 600pvr
- 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)
Display Function:
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full
(thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen
EMU:
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
Addons:
* Internet addons download
* Manual addons install
* Remove installed addons
Misc:
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
/var/etc/SifTeam/tmp/url2 (that it contains your link)
after, into server have write your cpanel-dream.xml (for dream decoder)
or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
(for simple system, download cpanel*.xml from sifteam URL)
THANKS TO:
See Yellow from Control Panel for other help into this work.
All IPBOX > ..special thanks to sandali for its branch of development ..
and Blakskettle for any info.
FOR ALL > porto, MaxZ4, tension9000, jlmota ..and other?
Thanks to all and good fun
http://www.mediafire.com/?yz3uj4yzqm9
Version 3.0
Update: 08.02.2009
Neue Skin-Features (alle Skins sind/werden getauscht im Online-Update) ...
in der Programmübersicht wird der Fortschritt der laufenden Sendung
angezeigt
*** AC3
- Aufnahme Deaktiviren und Teletext bei Aufnahme deaktivieren ist
im Expertenmenü schaltbar!
*** Enigma optimiert, um 100 KB kleiner (wichtig für die CVS-Images)
*** NAS gefixed
*** IDE gefixed
*** Fixes in der BA-Verwaltung
*** Diverse kleinere Fixes
*** Deutsche Sprachfiles ok
http://www.upload-drive.com/8002/PB_ENIGMA_500_rar
Testat , nu am gasit sa vad spatiul , cred ca sta rau la capitolul spatiului disponibil , imaginea nu e asa clara in cvbs. Poate trebuia sa testez mai mult dar ...mai sant de testat si alte imagini.
Pt . incepatori :
Backup_SifTeam-1.9.3C_2-500MV_BY_ANTR@G
Backup_SifTeam-1.9.3C_2-500MV_BY_ANTR@G
*Emu
CCcam 2.0.11
Mgcamd 1.31
CCcam Info
keydownload
Cryptinfo
TuxBox Commander
WeekEPG 3.1b
Settings
Vhannibal Dual Feed 15-02-09
key Incluse
BY_ °°ANTR@G°°
Thx..by°°ANTR@G°°
Attached Thumbnails http://www.sat-universe.com/attachment.php?attachmentid=115743&stc=1&thumb=1&d=1234697766 (http://www.sat-universe.com/attachment.php?attachmentid=115743&d=1234697766) http://www.sat-universe.com/attachment.php?attachmentid=115744&stc=1&thumb=1&d=1234697831 (http://www.sat-universe.com/attachment.php?attachmentid=115744&d=1234697831) http://www.sat-universe.com/attachment.php?attachmentid=115745&stc=1&thumb=1&d=1234697831 (http://www.sat-universe.com/attachment.php?attachmentid=115745&d=1234697831) http://www.sat-universe.com/attachment.php?attachmentid=115746&stc=1&thumb=1&d=1234697831 (http://www.sat-universe.com/attachment.php?attachmentid=115746&d=1234697831)
download :
http://rapidshare.de/files/45308786/SifTeam-1.9.3C_2-500MV_BY_ANTR_G.rar.html
Backup_SifTeam_500MV_1.9.3D
CCcam 2.0.11
Mgcamd 1.31
Setting Vhannibal Dual Feed
Language English Italiano
CCcam.Info
Cryptinfo
keydownload
BY_ANTR@G
download :
http://rapidshare.de/files/45880480/Backup_SifTeam_1.9.3D-500MV_BY_ANTR_G.rar.html
Eagle V5 comes in 3 different images.
EagleV5.0, EagleV5.1, EagleV5.2
Updates:
1. All Logo's changed, boot, radio, mp3 & scan.
2. Webif Media Player version:
If you change your IP or password You must edit the
/vartuxbox/config/enigma/htdocs/eagle.wpl with your correct eagle login details.
To stream via media player:
In the webif, click on "Media Player" and choose open with "Windows Media Player"
So long as you have bitcontrol codecs registered on your pc, it will stream perfect in
wmp.
To stream a radio channel:
First start streaming on a tv channel, then switch to a radio channel.
3. Topbalk graphics updated:
topbalk.png
topbalk_small.png
4. Default Skin:
New Eagle Alsat (eagle.esml)
5. Fonts:
Updated
6. Config Updated:
/var_init/tuxbox/config/enigma/config
Set the default skin to eagle.esml
7. rcdm5xxx.xml:
Replaced with the one advised in Team Section.
8. satellites.xml:
Updated the latest satellites.xml, all satellites in this range (45.0W - 69.0'E)
Edited according to Eagle V2 image.
9. Streampes:
Updated to latest version from bitcontrol
10. Shutdown Menu
Changed to "restart your eagle"
11. Image Versions updated in enigma.
12. Webif Remote Control.
Changed the picture to show Eagle Linux Box.
13. Plugin Added:
Restart Enigma Now
14. Cpanel:
Latest Cpanel.xml updated (19 June 2009)
15: Ethernet:
Ethernet is enabled with a static ip at startup eg:
V5.0 = 192.168.0.10
V5.1 = 192.168.1.10
V5.2 = 192.168.2.10
You have 10 seconds to connect and fix or flash a new image.
Choose your correct image:
V5.0 if your Router Lan IP Pooling Address = 192.168.0 - 100
In "communication setup" just set a static ip which corresponds with your image version.
V5.1 if your Router Lan iIP Pooling Address = 192.168.1 - 100
In "communication setup" just set a static ip which corresponds with your image version.
V5.2 if your Router Lan iIP Pooling Address = 192.168.2 - 100
In "communication setup" just set a static ip which corresponds with your image version.
Image size = 5.020 KB
New Image works 100% atm and very fast.(26% var used)
Default login details
User: root
Password:eagle
http://img32.imageshack.us/img32/1215/eaglev50bootlogo.jpg
http://img93.imageshack.us/img93/9076/static1.jpg
http://img134.imageshack.us/img134/8585/skinzav.jpg
download
Eaglev5_0.rar
http://www.girlshare.ro/550226.6
Eaglev5_1.rar
http://www.girlshare.ro/550228.8
Eaglev5_2.rar
http://www.girlshare.ro/550229.9
TDW DM500 1.70 Maxvar Image
CVS Datum: 27.03.2009
Enigma: 27.03.2009 (tdw mod)
Busybox: v1.01 (tdw mod)
Kernel 2.6.9 (tdw mod)
Tasten Belegung und standart Einstellungen
Standard keyboard layout and settings
Blauetaste TDW Panel
TWD Panel Button Blue
Gelbetaste Addons/Plugins
Yellow button addons / plugins
Gelbetaste Untermenu/subservise
Yellow button submenu / subservise
Rotetaste epg-menu
Red Button EPG menu
OK-Taste lang drucken erreichen sie Bluepanel
OK button long press to reach Blue Panel
Gelbe und Blauetaste konnen sie nach wunsch belegen
Yellow and Blue button allows them to request proof
TDW-Panel abschaltbar unter TDW Panel/extras/TWD Utilities/Fernbedienung
TDW-Panel, TDW-Panel under disconnectible / extras / TWD Utilities / Remote
TDW Cron Manager
Programmverlauf der Sender im Überblick
Program course of the transmitter at a glance
Standart und Netzwerk ECM in der Infobar Abschaltbar
Standard and network in the ECM infobar switched
Zeigen standart und Netzwerk ECM und Verschlusselungsart in der Infobar
Show standart and network encryption and ECM in the infobar
TDW-Panel
OK-Taste lang drucken, erreichen sie TDW-panel
OK button long press to reach TDW-Panel
download
http://www.girlshare.ro/551300.2
http://img7.imageshack.us/img7/7192/image06221751cvbs.jpg
http://img140.imageshack.us/img140/9756/image06221751cvbs1.jpg
http://img140.imageshack.us/img140/4360/image06221752cvbs.jpg
http://img140.imageshack.us/img140/7804/image06221752cvbs1.jpg
http://img265.imageshack.us/img265/8271/image06221752cvbs2.jpg
DreamBox Linux FTA Fix Aug Nagra3 (Zon) Cards Ready EagleImageV5 for Dm500 00/09/09
9-09-09
Ready for Nagra 3 cards as long as you know the details of your box.
Just need to edit them on var/tuxbox/config/newcs.xml
This image is ready for nagra 3 cards but is optimized for Tv Cabo cards and his set to Hispasat, with scanned channels on 01/09/09, due to channel changes, and a Favourites list included.
MPCS config files have updated pids list By Joebusca, so all Tv Cabo channels are recognized and work (01/09/09).
CCcam channels info edited to match above information
EagleImageV5 based and includes
CCcam 2.0.4 + MPCS + NEWCS ( The only way to have nagra 3 cards showing on localhost)
CCcam info 1.0
MPCS Monitor
Scanned Hispasat on 01/09/09
Tv Cabo Favourite list
Image login details
The new FTA Fix File.
Load the new FTA Fix File and set auto roll to "ON" and wait up to 15 min for the keys to auto roll.
Make sure that the Auto Roll feature is turned "ON." You will find the Auto Roll feature in the Menu options.
If you don't have the picture after 15min Reboot your system using the switch at the back of the receiver.
* Change*
( Main software upgrade )
- AR Fixed
Note:
- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD)
- Always format USB thumb drive before any update
- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.
- Do a hard reboot (power OFF-ON using rear switch) after every update.
http://www.dvb-upload.com/index.php?action=preview&pid=284467
Evolution 2.3 Dreambox edition
Dreambox 500/56x0/7000
Technical Infos:
CVS Version: 05.12 2009
Linux kernel version: 2.6.9
GCC 3.4.4 Original CVS
Web Inteface 6.0.4-Expert
Busybox 1.01
BLUE - Blue Panel (Emu Addons)
YELLOW - plugins
RED - EPG
GREEN - subservices
Blue Panel Info:
Start/Stop Emu
Green - News
Red - Sys Info
Blue - Addons
Yellow - Settings
Addons info:
Download Addons - Emus,keys,Plugins,Setting....
Manual Install Addons tar.bz2
Delete Addons
-------- New in Evolution 2.3------------
Fix CCcam bug with external card reader
Fix restart Enigma i hope!!
Changes in Enigma code
Removed epg faster we have now in cvs
Removed not needed files
Update libc.so.6
New boot logo
Latest satellites.xml if you dont like it update your with dreambox edit
New stuff in cvs
-------------------------------------------------------------------
Thanks to my freands Ohem2000,dzoni,Alucard for helping me!!
Support and bug report: EVOLUTION (www.satkeynet.com/forum)
This image doesn't include keys or emulators.
satkeynet is not responsible any damage caused by this software.
*******************************************************************************
DOWNLOAD Evolution 2.3 for Dreambox 500S (http://www.girlshare.ro/725289.4)
Gemini Project 4.70 DM500 MaxVar
Download : http://www.easysurf.ro/j45k1ndoadw3/Gemini_0470_DM500_max_var_12122009.zip.htm
Technical Infos:
* Enigma of: 19.12.2008
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.4-Expert
* Busybox 1.01
* Tuxtxt V1.104
* CIFS 1.44
Remotecontrol:
* BLUE - Blue Panel (BP)
* 2x BLUE - BP -> Extras/Settings
* YELLOW - Quick-Button (can be configured via BP)
* RED - EPG list for active channel
* 2x RED - EPG style menu
* GREEN - subservices
Addons:
* own Addon-Server via Internet, many addons with preview
* Retreiving additional functions via internet from the Gemini-Server and install them automatically
* Personal Addon-Server can be used (configuration via /var/etc/useraddon.xml)
* Create your own Satellites.xml, which only contains the Satellites you really need
* Manual installation or deinstallation of addons
Camd:
* Different Camd´s can be linked to channels/provider (Autocam)
* Changing the name and settings with a menu of its own
* Possibility of establishing a second socket (/tmp/cam1.socket)
Daemon / Server / Clients:
* Automatic test whether the box is connected with the internet or not (To be shown in the infobar)
* Dropbear (SSH) can be set on and off (DM500 - DM7000: Standard->off)
* Added editor to configure the cron-daemon
* Little Apache (HTTP-Server based on HTTPD)
* Upnp Client and Server (for DM500/56x0 must be installed from Gemini-Server as addon)
* Inadyn (Daemon for different DYNDNS-Services)
* Settings for syslogd
* Dreambox can be used as printserver (BP->Extras/Settings->Printer (LPD), FAQ can be found in the database
* Automount, for examples have a look at: /var/etc/automount.conf. Devices, NFS or CIFS will be automatically mounted. Perfect for DVD- or Net-Drives (Editor can be found in the BP)
* NFS-Server (based on the NFS-Kernel-Modules, not for DM500, DM500+ and DM56xx)
Infobar / OSD / Skin / Background-Pictures:
* Position of the Infobar can be changed without editing the skin files
* Provider, Frequencies, Symbolrate and FEC can be displayed in the Infobar (If the Skins supports this function)
* Display of EMM, ECM or "Expertinfos" are adjustable
* Picon (displaying the Channel-Logo)
* Extensions for Skins (Thumbnails, 3D-Font, Pictures for Progressbar)
* Background picture can be turned off (Plasma - Fix)
* Backgroundpictures (Radio- and File Mode) can be used as Screensaver.
* Changing Bootlogo via menu ( 7020 only)
* Backgroundpictures and Bootlogos can be created, testet and used direct on the Box (out of JPG, BMP, GIF or PNG)
* Showing Onlinestatus when the Box is connected to the Internet (must be activated in Expert Menu -> Network)
* Moved Gemini events (Ripper, Calendar, email-Checker) from BluePanel Menu into the infobar (eLabel-Name = geminievent)
Files / Devices
* Support for CD-ROM/DVD-drives ,regardless of using IDE or USB
* Random function for all kind of soundfiles
* Backup function
* Two new root entries for music and pictures can be created in the filemenu (BP->Extras/Settings->Root-Entry)
* Support of the bigger remote on 500 and 500+ (normaly shipped with 70XX/600pvr - activate on BP->Extras/Settings)
* Support for FLAC, OGG/Vorbis and WAV (please install codecs in the BP)
* Functions for SWAP (virtual memory). Create, delete, size and location.
* Device-Manager for HDD / DVD / CF / USB
* Drivers for USB-Cardreaders are now included in the Image but are not loaded automatically!
EPG
* additional functions (e.g. dishnetwork, cache, location)
* search all channels for an event or an own string. Timers can be added immediatly (Press "Menu" in the epg or use use BP -> extras -> EPG-Refresh)
* Infos of the recorded movies can be shown without starting the movie
* refresh EPG using the enigma-timer (BP -> extras - EPG-Refresh)
* autosave for EPG-cache ( BP -> Extras/Settings -> EPG-Settings)
* Duration of current event in the programm overview ( Menu -> Info -> EPG)
* general information about the EPG Data (BP -> Info-> EPG-Settings)
* a time period for the EPG Data can now be defined (BP -> Extras/Settings -> EPG-Settings)
Extras:
* Dreamnetcast (shoutcast-player) with Streamripper (direct recording from server and coding into mp3´s) (for DM500/56x0 must be installed from Gemini-Server)
* RSS und Weather Plugin (for DM500/56x0/7000 must be installed from Gemini-Server)
* System Info: Many extra box infos like HDD temprature, stream-rates (>=7000) or kernel-, memory- and prozessinfos.
* Own scripts can be started via Blue Panel
* Changing the recording parameters (extra before- and after- recording time, storage location and recover-function for your records)
* change the settings for recording (before Time, after-recording time,, location and recover-function)
* Create your own satellites.xml including only the satellites you really need.
* Quick-Button-Menu: Many extra features for the yellow button (e.g permanent clock in OSD, freeze Image, audio selection)
* alarm-clock with volume offset playing own WAV-Files
* Calendar for iCalendar format + reminder ( Supported by MAC, KDE, Thunderbird, Goole calander, Rainlendar...). Standard folder is /var/etc/ical (for DM500/56x0 must be installed from Gemini-Server)
* Support for DreamDVD no matter wether a DVD-Drive is available or not
* New screenshot routines (have a look at the Webif)
* eTorrent - a torrent client based on ctorrent. Can be managed completly over the OSD (for DM500/56x0/7000 must be installed from Gemini-Server)
* disable the TV - output while taking a recording, streaming a movie and manually (usefull for boxes with very low lan-speed)
* update system time via transponder or internet ( Protocol RFC868 )
* eMail-Checker extended with SSL support (Overview of your POP3 or IMAP accounts)
* create password using the BP (BP -> Extras -> Pwassword)
* rotate al kind of pictures. Also automatic rotation using EXIF (must be activeted using the menu)
* Re-Zapp, zapps after X-minutes to the actual Channel (BP -> Re-Zapp)
* Displays, wether the box is an original one or not (using MAC adress, BP -> System -> Dreambox -> Manufacturer)
* the Jukebox, Please install as addon.
Recordings:
* records into different folders ( the settings have to be done in the Timer-Menu)
* LED´s are flashing during record (Boxes without display). Must be set in BP -> Extra -> Record
* import of recorded movies every time you enter the Video-Menu or only once when the Box ist starting (BP -> Extras -> Record)
* Records can now be done in the new Eniga2 format (*meta files) or as usal as "recordings.epl" (BP -> Extras -> Record)
New:
* USB-Cardreaders can be activeted over the menu (BP->Extra->USB-CardReader
* With the variables "show_gemini_server" and "show_camd_plugins" the addondownload and the server can be influenced (/var/etc/Gemini.conf)
Fix + update:
* After- and Prerun at records increased to 20 minutes
* after a backup-restore the datas are available immediately, eg. bouquets
* Crash at web-access to PMT-Pid without a valid PAT
* Flickering of the popup "Channel change: Service not found"
* Prevent the popup "Channel change: Service not found" while the rotor is moving
* have a look at the CVS
Interfaces WebIF:
http://127.0.0.1/cgi-bin/GeminiInfo
http://127.0.0.1/cgi-bin/StopCam?ZAHL (ZAHL = number of cam)
http://127.0.0.1/cgi-bin/StartCam?ZAHL (ZAHL = number of cam)
http://127.0.0.1/cgi-bin/InitCam
http://127.0.0.1/cgi-bin/ResetCam
http://127.0.0.1/cgi-bin/setKey?typ=STR&...test&val=blabla
http://127.0.0.1/cgi-bin/getKey?typ=INT&...itedvb/int-test
We'd like to thank everybody who participated in the "Gemini suggestion" thread. Unfortunatly many things can not be realized by us, but must be developed by the CVS-Team
.
This images doesn't contain any keys or softcams. Backups or other modified Images are not released by and won't be supported in any way!!!
Gemini Images may only be used on receivers of the manufacturer Dream-Multimedia-TV.
The use of this Image is on your own risk.
Recommendation:
If you don't install the Image in flash memory, the flash image shouldn't be of a old version. A swap file/partition (>= 16MB) should be present
if several processes running in background. We take no responsibility for direct or indirect damages!
Gemini 4.70 Ara drhg NO-Bomb
Download : http://www.easysurf.ro/pot53vekt61e/Gemini_470_Ara_drhg_NO-bomb.zip.htm
.
Pentru posesorii de clone fani GP care nu vor sa isi asume riscul, aceasta imagine pare a fi o solutie OK, deoarece la prima vedere pare ca s-a eliminat din cea postata de IHAD doar time bomb, in rest este identica. Daca mai punem la socoteala si faptul ca logo-ul de boot poate fi schimbat cu unul personalizat atunci chiar ca merita sa i se acorde o atentie sporita fata de celelalte alternative.
Noua imagine PLI -> OpenPLi-unstable-dm500-maxvar-20100120-68.img
http://img233.imageshack.us/img233/6127/dwload.gif (http://www.pli-images.org/modules/file_downloads/file_downloads.php?fd_id=1&dir=/dm500-maxvar&file=OpenPLi-unstable-dm500-maxvar-20100120-68.zip)
Pentru celelalte modele DM, detalii gasiti pe pagina oficiala PLI (http://www.pli-images.org/modules/file_downloads/file_downloads.php)
DM500S Nemesis 4.4.1 Skin Rihanna blue and CCcam2.1.4 by Marwen
with :
*Easylogo V1.2
*CCcam 2.1.4
*CCcaminfo V1.1
* Rihanna Blue
*Nagrab
*Free space in Var 83%
langueges = arabic+english+french
http://i48.tinypic.com/nouhqs.jpg
http://i46.tinypic.com/23mosr4.jpg
http://i50.tinypic.com/v2r01x.jpg
DOWNLOAD
http://www.4shared.com/file/225841035/102644c8/New_Nemesis_441_Skin_Rihanna_b.html
Nabilosat Darkstar II_Skin Original_SPCS_2.5.16&CCCam_2.1.4_Maxvar_Mod cool753_25.02.2010
Cod HTML:
cool753;
1 st release 25.02.2010
=============================
new modification ;
-new bootlogo arabic-sat
-Emu: Spcs 2.5.16 inside (start with image..in blue panel withe volume button for the built-Emu )
-Emu: CCcam2.1.4 inside (start with image..in blue panel withe volume button for the built-Emu )
-send reader.bin in /var/tuxbox/config with ftp
-send CCcam.cfg in /var/ect with ftp
-Skin orginal (Dark)
-French &English language
-big var 77% Free espace with Spcs emu and CCcam and more
-add = CCcaminfo&and Ecminfo&Mgcamdinfo&HackSatKeys V9a&Ngrab recording=inside image (Yellow Button)
-add softcam (entv,foxlife....)
-disable MHW EPG (no frezz)
-Fast image to open channels with Spcs&CCcam
-send this image withe dreamup or falshwizard .
http://www.4shared.com/file/229688115/6680e5f2/Nabilosat_Darkstar_II_Skin_Ori.html
http:///i50.tinypic.com/30bmg04.jpg
Salut
eu am verificat aceasta imagine pe un dm500s dar imaginea nu este ok are cateva nereguli si in plus ai multe de configurat la ea dupa ce ai instalat aceasta imagine nu tine minte nici macar ceasul , il reglezi si dupa primul restart revine la loc adica tot asa cum vrea ea imaginea nu dupa fusul orar unde te afli tu si are multe altele defectiuni va las sa le gasiti voi testand aceasta imagine .
eu zic , ca aceasta imagine inca nu este ok mai este de lucru la ea pana sa fie la vreo versiune finala ( corecta in toate punctele de vedere )
singurul lucru OK la ea este ca ocupa spatiu putin in var ocupa doar 26% dupa ce ai intalat imaginea .
In rest este bataie de cap cu ea .
Bafta in continuare la teste .
Am instalat-o si eu de 2 zile....in afara de nepastrarea fusului orar ales , nu am gasit nici o alta problema....De configurat nu faci in plus nimic fata de o alta img. pt. Dream500...Iti alegi satelitul dorit, dai cautare si salvezi!In rest , ceea ce ai nevoie vine preinstalat! Deci nu e chiar de aruncat ...Parerea mea!
daca zici tu asa sa fie
Eu doar miam expus parerea
dar si la transponderi nu scaneaza decat 54 si pe ceilalti pana la 80 si ceva trebuie sai bagi manual plus scrisul la info la fiecare canal in parte este foarte mare si altele .........
am pus alta imagine ca daca o mai aveam imaginea asta pusa iti spuneam tot cea ce nu este ok la ea .
EDG-NEMSSIS_4.4._Skin Rihana_Special_SPCS_2.5.16_Maxvar_27.02.2010
new modification ;
-exlusive new bootlogo arabic-sat
-Emu: CCcam2.1.4 inside (start with image..in blue panel withe volume button for the built-Emu )
-send CCcam.cfg in /var/ect with ftp
-Skin Rihana_Special
-Arabic&French &English language
-new logo for (scan-radio-mp3)
-big var 81% Free espace with CCcam emu and more
-add = CCcaminfo&and Ecminfo&Mgcamdinfo&Key updater v0.4&Ngrab recording&Tuxbox Commander&Teletext=inside image (Yellow Button)
-add softcam (entv,foxlife....)
-add extra (addons:emu)
-Fast image to open channels with CCcam
-send this image with dreamup or falshwizard
http://www.4shared.com/file/232365523/70fd18b3/EDG-NEMSSIS_44_Skin_Rihana_Spe.html
Evolution 2.4 Dreambox edition
Dreambox 500
Technical Infos:
CVS Version: 09.03.2010
Linux kernel version: 2.6.9
GCC 3.4.4 Original CVS
Web Inteface 6.0.4-Expert
Busybox 1.01
BLUE - Blue Panel (Emu Addons)
YELLOW - plugins
RED - EPG
GREEN - subservices
Blue Panel Info:
Start/Stop Emu
Green - News
Red - Sys Info
Blue - Addons
Yellow - Settings
Addons info:
Download Addons - Emus,keys,Plugins,Setting....
Manual Install Addons tar.bz2
Delete Addons
-------- New in Evolution 2.4------------
CVS update
Some bug fixes
-------------------------------------------------------------------
DOWNLOAD http://img6.imageshack.us/img6/4079/pointright.gifDM500S Evolution 2.4 (http://www.easysurf.ro/whec8tpw9u58/dm500_Evolution2.4.img.htm)
Evolution 2.4 avea ceva buguri , pornea foarte greu emulatorul. Sper ca asta sa merga bine . O testez acum .
DOWNLOAD (http://www.zshare.net/download/73790249911cd0bd/)
Evolution 2.5 Dreambox edition
Dreambox 500/56x0/7000
Technical Infos:
CVS Version: 13.03.2010
Linux kernel version: 2.6.9
GCC 3.4.4 Original CVS
Web Inteface 6.0.4-Expert
Busybox 1.01
BLUE - Blue Panel (Emu Addons)
YELLOW - plugins
RED - EPG
GREEN - subservices
Blue Panel Info:
Start/Stop Emu
Green - News
Red - Sys Info
Blue - Addons
Yellow - Settings
Addons info:
Download Addons - Emus,keys,Plugins,Setting....
Manual Install Addons tar.bz2
Delite Addons
-------- New in Evolution 2.5 --------------
Fix start Cam after reboot
Fix arabic language
Fix not working plugins on 2.4
---------------------------------------------
Thanks to my freands Ohem2000,dzoni testing!!
Support and bug report: www.satkeynet.com/forum
This image doesn't include keys or emulators.
satkeynet is not responsible any damage caused by this software.[COLOR="Blue"]
Nabilosat darkstar2 with cccam 2.2.1 skin Rihana Net
New bootlogo Hd
Cccam 2.2.1 integrate with cccaminfo and ecm info hacksatkeys nagrab signal Quality .teletext
Free Espace En Var 74%
http://www.girlshare.ro/1738668.8
un link nou? asta ma duce pe ... alt site
Download (http://www.2shared.com/file/10122971/b152577b/Gemini_470_Ara_drhg_NO-bomb.html)
Image Eagle5.2-_-Emo CCcam2.2.1 and Mgcamd1.35a-_-Mdmugen
Image Eagle 5.2 and Amendments by
Of amendments that I have made the following
* change the original knife knife Black Matrix HD converter from Enigma2 to Enigma1 where you convert it to this picture and the amendment at large of the fonts to the windows and Kmalk Alskinat worked in the two types of this knife, one with windows normal and the second as the new windows in the bottom of the image channels participation (2 in 1).
* HD image of a beautiful start with the possibility of change with ease.
* Arabization of Hisham's line with the possibility of changing the font, and the integration of language Kmalk Max and French languages with the ability to delete from the deletion.
* amendment to the button Help to change the menus and direct recording.
* amendment to the selection of Arabic channels of movies directly to supporting the Arabic translation.
* As you prepare a list of the settings in the Settings Monte only need to put Ebi computer and file name Elsher working sword and then mount and begins the registry directly.
* change the path of pictures ( startup , radio , search , and the MP3 ) and File Kmalk local time and one satellite and knowledge of Arabic and a fixed channel so that you can change them simply and easily.
* change file Head.ko to become the image with Megaupload faster than normal .... I'll leave the answer for you after the experiment.
* the work of two, one with the emo CCcam 2.2.1 and the other by the Imo MgCamd 1.35a .
* Merge Pelagian CCcaminfo 1.1 and Pelagian Ngrab and Kmalk Pelagian Teletext 1.114 works great all the additions in the heart of the image with the possibility if you want to delete them.
Is very fast and beautiful, and the server works and is always updated ... Deletion region accessible like this: blue button, and then to blue and then enter the Addons Addon Manager.
Important Note: After you download the image and to adjust most settings, satellite Sign directly send a file or search for channels, channels, and then choose a specific channel and stand by the channels because the picture without doing a Restart alone ... Kmalk and after sending a file subscription entry on the list and activate Aladonz emo again by pressing the blue button then Red and finally the work is to reboot to save the new settings ...
Do not forget to change the course of my edits from the var / bin / RAED to var / RAED until there is more stability to the image
All changes have been away from the area of var to maintain the area significantly and images show the following piece
http://img148.imageshack.us/img148/9725/27122010034415.jpg
http://img227.imageshack.us/img227/8485/27122010031156.jpg
http://img217.imageshack.us/img217/4589/27122010030739.jpg
http://img8.imageshack.us/img8/2664/27122010030814.jpg
http://img593.imageshack.us/img593/2212/27122010031458.jpg
http://img130.imageshack.us/img130/7912/27122010031726.jpg
http://img840.imageshack.us/img840/2055/27122010031350.jpg
http://img808.imageshack.us/img808/2413/27122010031430.jpg
Eagle + CCcam 2.2.1 (http://www.4shared.com/file/HH5StlbU/Eagle52_CCcam221_Mod_RAED_27-1.html)
Eagle + MGcamd 1.35a (http://www.4shared.com/file/nVsqX8Pf/Eagle52_MGcamd135a_Mod_RAED_27.html)
Evolution 2.6 Dreambox edition
Dreambox 500
Technical Infos:
CVS Version: 04.01.2011
Linux kernel version: 2.6.9
GCC 3.4.4 Original CVS
Web Inteface 6.0.4-Expert
Busybox 1.01
BLUE - Blue Panel (Emu Addons)
YELLOW - plugins
RED - EPG
GREEN - subservices
Blue Panel Info:
Start/Stop Emu
Green - News
Red - Sys Info
Blue - Addons
Yellow - Settings
Addons info:
Download Addons - Emus,keys,Plugins,Setting....
Manual Install Addons tar.bz2
Delete Addons
-------- New in Evolution 2.6 --------------
Update CVS
Update libc.so.6 (important)
Fix Oscam new version not working (symbol getaddrinfo)
Fix total tv epg
Fix not working plugins on dm500
Fix VLCF on dm500
Fixes......
New Bootlogo
---------------------------------------------
Support and bug report: www.satkeynet.com (http://www.satkeynet.com)
DOWNLOAD Evolution 2.6 DM500S (http://www.mediafire.com/?rp4it7azpbv679a)
** Orginal skin yerine max 23a skin kullanilmistir...
Special Thanks maxsimuss
** Turkce ve Ingilizce diller mevcuttur...
( Diger diller addons dan indirilebilir )
** Yeni 2 Adet bootlogo kullanilmistir.
** CCcam 2.2.1 entegredir.
** CCcaminfo 1.1 entegredir.
** Ecminfo entegredir.
** Extra Addons entegredir.
** Teletex mevcuttur.
** Web-x-tv ayarlari yapilmistir.
** 4 uydulu satellite xml kullanilmistir (Turksat-Hotbird-Eutelsat W3A-Astra 19.2)
** Kanal listesindeyken help tusu ile kanal listesi yan yana yapilabilir.
** Doluluk orani %18 dir...
** Dream Up ve Flashwizard ile yuklenebilir.
--- Image test edilerek foruma verilmistir.
--- Yinede sorumluluk yukleyene aittir.
** Kurulumdan once mutlaka yedeginizi alınız...
** Kurulumdan sonra Cccam.cfg yedeginizi var/etc icine atmaniz,
LNB ayarlarinizi yapmaniz ve kanal listenizi yuklemeniz yeterlidir
Traducere din Turcă in Romană
** Disponibil in limbile engleză şi turcă ...
(Alte limbi pot fi descărcate de la addons)
** noi 2 bootlogo Piece utilizate.
** integrat cu CCcam 2.2.1.
** CCcaminfo 1.1 integrat.
** Ecminfo integrate.
** Extra addons integrate.
Teletext ** este disponibil.
** setările Web-x-tv a fost făcut.
** 4 satelit satelit utilizate in xml (Turksat-Hotbird-Astra-Eutelsat W3A 19.2)
** lista de canale, buton de ajutor se poate face cot la cot cu lista de canale.
** Rata de ocupare este de 18% ...
** Dream Up şi incărcate cu Flashwizard.
--- Image a fost testat şi dat la forum.
--- Cu toate acestea, responsabilitatea aparţine descărcat.
** Inainte de a instala o copie de siguranţă ar trebui să caute ...
** După instalare, CCcam.cfg există backup / etc ieşi din
Face ajustările dumneavoastră trebuie să instalaţi LNB şi lista de canale
http://www.megaupload.com/?d=7MSV7VII
Nu mai folositi imagini modificate. Dupa aceia va plangeti ca cineva v-a furat configul.
Te rog fi mai explicit ,cum se poate fura cfg? eu am o clona dm si ce imagini sa folosesc daca nu modificate?.
Este bine sa folosesti imaginile originale produse de team-ul respectiv (Nemesis, PLI, Dark_Nabilo, SIF..) Cele modificate sunt de fapt derivate tot din cele originale, insa autorii lor au scos ceea ce au considerat ei ca respectiva imagine are in plus si au introdus kitch-uri personalizate cu semiluna sau alte sigle specifice. Multi se bucura ca asa obtin ceva spatiu liber in care mai poate adauga ceva...insa majoritatea uita ca si autorii ar putea adauga un script care sa ruleze ascuns si sa trimita datele "personale" acolo unde trebuie. Deci o "modefecata" reprezinta de fapt tot o originala dar mutilata, la care ceea ce pt unul nu conteaza si poate fi scos la altul este util. Nu poti dezinstala emu default, de multe ori nu poti instala altul sa ruleze stabil si enumerarea dezavantajelor poate continua.
Special Thanks maxsimussDaca tot e recomandata de un co-autor, poate are o opinie despre eventualele pericole ascunse in ea.
cam pe unde sa vedem daca are vreun script din asta, daca se poate ?
@maximuss a facut skinul si nimic altceva, altii au preluat skinul lui si l-au introdus in imaginea aia modificata.
Unde se vede daca are ceva necurat ? pai nu se vede asa cum nu s-a vazut nici la aparitia GP 4.3.1 vestita bomba, dar s-a simtit dupa ce a "explodat".
P.S. acum nu este neaparat obligatoriu ca tot ce este modificat sa contina ceva malefic, dar paza buna trece primejdia rea si daca eviti astfel de imagini nu prea ai ce pierde...parerea mea
SifTeam-1.9.4C-500MV.img.zip__2011-Mar-01
IPBOX200S:
-------------
Usable to flash
* Enigma of: 28.02.2011 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* New driver from sandali
* MMC Drivers included with script for load
* Have to SET mID 20
IPBOX200S 64mb:
---------------
* For ipbox-200@64mb you have:
1) Install normal image (32mb)
2) Install "serial_uboot_64.img"
* Thanks to Sandali for serial_uboot_64.img
IPBOX250S:
---------
Usable to HDD (CF) or flash
* Enigma of: 28.02.2011 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* MMC Drivers included with script for load
* Have to SET mID 25
IPBOX350S:
---------
Usable to HDD, USB or flash
* Enigma of: 28.02.2011 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* MMC Drivers included with script for load
* Have to SET mID 26
IPBOX400S:
---------
Usable to HDD or flash
* Enigma of: 28.02.2011 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* MMC Drivers included with script for load
* Have to SET mID 40
DB500:
--------
Usable to flash
* Enigma of: 28.02.2011
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB5620:
--------
Usable to flash
* Enigma of: 28.02.2011
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 28.02.2011
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 28.02.2011
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 28.02.2011
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************************************
DB500PLUS:
---------
* Usable to flash
* Enigma of: 28.02.2011
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************************************
Qbox-one:
---------
Usable to flash
* Enigma of: 28.02.2011
* Linux version 2.6.17
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
************************************************************************
ALL DECODER ( same options not present to Qbox-one - IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* 1 x BLUE = Emu Panel
* 1 x Yellow = Plugins
* 1 x Green = Addons Panel
* 1 x Red = EPG ( settable from Control Pannel )
* BLUE > 1 sec = Control Panel ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin ( settable from Control Pannel )
* Green > 1 sec. = Personal Plugin ( settable from Control Pannel )
Features:
----------
* Advanced MINICROND system configuration, with more script added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration (have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration (have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to install online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button is modifiable from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have manage remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add one plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for save one dir. to extern support)
* Advanced SAMBA with graphics start/stop/configuration (7020 - 600pvr - 500plus have samba installed from
default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)
* Lock EMU panel from Parental Control option
* Save downloaded packages (settable from expert menu)
* See info package before install from online (settable from expert menu)
* See last package present online from "news" button
* Compatible with Upnp (Server/Client)
Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
Misc:
------
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
/var/etc/SifTeam/tmp/url2 (that it contains your link)
after, into server have write your cpanel-dream.xml (for dream decoder)
or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
(for simple system, download cpanel*.xml from sifteam URL)
************************************************************************
THANKS TO:
--------------
See Yellow from Control Panel for other help into this work.
All IPBOX > ..special thanks to sandali for its branch of development.
FOR ALL > See About in Control Panel (blue > 1 sec.)
Thanks to all and good fun :)
************************************************************************
VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) ...and other?
************************************************************************
DOWNLOAD ==>> SifTeam-1.9.4C-500MV.img.zip (http://dreambox.sifteam.eu/index.php?dir=SifTeam_1.9.4C/28-02-2011/&file=SifTeam-1.9.4C-500MV.img.zip)
http://www.sat-planet.net/attachment.php?attachmentid=102538&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102542&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102540&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102541&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102541&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102543&d=1304193641
http://spaniolul.freeforums.org/images/icon_reimg_loading.gifhttp://www.sat-planet.net/attachment.php?attachmentid=102544&d=1304193641
Gemini 470 DM500 Carbon Trans
Bu imaj serjoga arkadasimiz icin editlenmistir...
** Herhangi bir emulator kurulu degildir...!!!
** No Time Bomb
** Turkce ve Ingilizce ve Rusca diller mevcuttur...
( Diger diller addons dan indirilebilir )
** Ecminfo entegredir.
** Teletex mevcuttur.
** Guncel cok uydulu satellite xml kullanilmistir.
** Kanallar help tusu ile yan yana yapilabilir.
** Doluluk orani %16 dir..
** Kurulumdan sonra Cccam.cfg yedeginizi var/etc icine atmaniz,
Addons dan herhangibir emulator kurmaniz,
LNB ayarlarinizi yapmaniz ve kanal listenizi yuklemeniz yeterlidir.
Kurulumdan once mutlaka yedeginizi aliniz...!!!
Download:
http://www.girlshare.ro/2123292.6
The images contain ONLY the update of CVS.
DOWNLOAD (http://dreambox.sifteam.eu/index.php?dir=SifTeam_1.9.4C/05-07-2011/&file=SifTeam-1.9.4C-500MV.img.zip) SifTeam-1.9.4C-500MV - 05-07-2011
http://www.2shared.com/file/FSvOoWDd/Marwensat_24_Maxvar_DM500s_290.html
este o imagine excelenta, are server de download inclusiv limba romana, functioneaza
Adenin's SatFinder 0.6 instalat pe aceasta imagine,imaginea nu are instalat niciun cccam
an ea nu se blocheaza deloc :)
cine ma poate ajuta pentru E1 cu fisierul pentru URL2 SIF E1.zip sau cu o adresa sa o scriu nu are camuri la URL1 am ancercat sa instalez manual si nu merge
http://depositfiles.com/files/nw5gqb078
http://sateliti.info/showthread.php?3-Regulament-Forum-si-Shoutbox
multumesc mult
cine a mai patit poate are un sfat
de ce la imaginea SifTeam-1.9.4C-500MV se decaleaza sunetul fata de imagine in timp daca schimb programul revine la normal si dupa 15-20min iarasi revine decalajul
este foarte stresant:fyou: nu stiu ce sai fac poate primesc o mana de ajutor multumesc anticipat
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.