PDA

View Full Version : Dm 100



otheitis
18-09-08, 15:09
Primele fotografie de la DM 100.Este de la un prieten grec.....Are software inchis fara linux,dar se aude ca o sa iese patch cu care o sa ia emu...ramune sa vedem!!

DM100.rar (http://www.upload-drive.com/2119/DM100_rar)

otheitis
18-09-08, 16:48
"How to " pt upload firmware in DM 100.Este cu fotografie....

http://rapidshare.com/files/146125718/How_to_download_DM100_S.zip
------------------------------------------------------------------------------------

DM100 Loader / Channel Editor.

http://rapidshare.com/files/146126780/LoaderChEditor.zip

pacala68
19-09-08, 01:00
Interfete Ethernet si USB ; Blindscan , daca integreaza in sw un modul de comunicare cccam atunci va fi un hit .

otheitis
19-09-08, 11:26
cam greu il vad.Mai repede ceva newcamd vad..

ss2-user
19-09-08, 17:34
O poza la placa de baza clara se poate?
Nu e linux? Costa in jur de 120-130 euro.

otheitis
19-09-08, 17:46
@gabitzu
DM 100 nu e la mine acasa dar la un prieten care a luat-o ca beta tester.Nici o el stia care o sa fie pretul exact.O sa incerc pt poza dar e depinde de mine.

Bengosu
20-09-08, 02:00
la cati bani dai pe asta iti cumperi o clona cu linux :)

pacala68
20-09-08, 10:35
ccamul este strins legat de dreammultimedia , de fapt merge doar pe enigma .
pot sa foloseasca un emu particular care sa faca AU la anumite pakete ( tactica Duolabs cu Diablo v2.3 ) si atunci o sa fie foarte atractiv .

otheitis
23-09-08, 19:00
release new emu s/w version,

1. In this s/w version, we fixed,
- Add CCCAM protocol
- Fixed 9750/10750 LNB Frequency
- Add channel changes (Numeric/Alphabet sorting)
- Fixed auto and manual time setting
- Hide Server menu: Expert menu PIN code -> input pin code '0000' only shows
tcp/ip
setting, input '0101' show all items, you can change PIN code, too.
- Add Email application (Only available POP3 mail receiving, mail sending
will be
added later)
- Fixed Premiere sub channels (when you change another TP, it may takes some
seconds when you get sub channels, we will make it faster later)

http://www.sendspace.com/file/bi88d2

------------------------------------------------------------------------------
DM100 Loader / Channel Editor

------------------------------------------------------------------------------
In the dm100 s/w downloader (loadercheditor.zip),
- added COM port 'auto mode'. But before press 'auto' button to look for com
port automatically, you have to wait around 20sec until dm100 booting
finished. If not, Automatic com port will not work.

http://www.sendspace.com/file/33kwp2

Asa cum se vede CCCAM e emu numai pt Dreambox receptoare si povestea ca CCCAM suporta numai receptoare cu enigma e o minciuna mare.Team de CCCAM posibil e finantat sub masa de la DM....

pacala68
25-09-08, 11:10
Pai nu e minciuna , enigma1 pe IpBox cu STB02500 ruleaza linistit CCCam si aproape sigur nu va rula niciodata pe procesoare STi7xxx indiferent ce enigma vor rula ( daca nu scoate si Dreammultimedia un receiver cu acest chip ) ; TripleDragon nu are enigma si nu poate CCCam.
Acum DM100 este mai bun decit o clona ( Blindscan si mai important USB2.0 ) si daca DM600 nu ar avea suficiente resurse ( flash si ram la discretie & programe suficiente si mature ) l-ar ingropa si pe el .
Adio IpBox 250 / 350 si ItGate TGS 220 .
Adio Globo/Opticum / Echolite/Echosmart / Noname .

Astept nerabdatoe exclusivitatile decodarii cu emu ( stiti voi , AU pe pornaciuni facute de TimeBomb pe DM500 :D )

otheitis
25-09-08, 22:34
CCCAM nu stiu citi timp o sa rezista cu politica asta deja mbox vine cu viteza de lumina!!!Si poate au suprinze ei de la cccam neplacute.Deja a scos mbox versiuna pt kathrein,ipbox,dreambox (la toate modele) pt windows (cccam merge la pc numai cu linux)acuma pregateste si pt tripledragon si pt anumite router de gen linkys.Si pt viitor nu exclude posibilitate de conectiune cu cccam...Ramune sa vedem...Dar pina acuma au facut ce au promis....

otheitis
02-10-08, 18:15
Dream 100 - Firmware V0126

--------------------------------------------------------------------------------

In this version,

- CCCAM works perfect (priolist will be added later)

- Premiere sub channels works good.



Notice:

- ‘dm100 s/w downloader’ doesn’t support WINDOWS VISTA at the moment,

we will add it later.

- Nemesis OSD will be released next week, you can enjoy 3D OSD or

Nemesis OSD upon your taste!

http://i37.tinypic.com/2h7o0th.jpg

DM100S_V0126.rar (http://www.upload-drive.com/2592/DM100S_V0126_rar)

otheitis
20-10-08, 19:20
How to upload Firmware file to DM100




This "how to" assumes you have already installed the UART USB COM driver and the LoaderChEditor.exe
If you haven't installed the above then check out the following threads for files and instructions.

OK, here goes, I've attached some pictures of the LoaderChEditor process below to help newbies ;-)

1. Connect USB A-B lead from PC to DM100 and connect power lead to DM100.
2. Load the 'LoaderChEditor.exe'
3. Click on 'Tools' --> 'COM Settings' Select the COM port number the UART Serial Port driver is configured to.
4. Click on 'Conn' Button' to connect to DM100
5. Click on 'Up' Button to upload new firmware.
6. An Open File box will open, from the file type drop down box select "BIN File .BIN"
7. Select the folder that holds your "DM100_Vxxx_firmware.bin" file, click on the "DM100_Vxxx_firmware.bin" file and click 'Open'

You will now see a box appear that displays the following message, "Reset your STB'
Remove the power lead from the DM100 then reconnect the power lead to the DM100.

You will see another message appear, "Writing to the flash, please do not disconnect"
There are 2 stages to the flash process, so wait for stage 1/2 to complete then stage 2/2 to complete.
Don't worry if stage 2 hangs for 30 seconds before the progress bar starts to move, this is normal.

Once the file has been loaded sucessfully you'll get another message box appear to say, "Complete"
Press OK to close the message box.

8. Now click on the 'D-Con' button to disconnect the DM100 from the LoaderChEditor application.
9. Power off the receiver by disconnecting the power lead from the back to reboot.
10. Switch on DM100 and select 'Factory Reset' from the DM100 on screen menu.

Finished.

Attached Thumbnailshttp://www.paytv.ws/attachment.php?attachmentid=80453&stc=1&thumb=1&d=1224285234 (http://www.paytv.ws/attachment.php?attachmentid=80453&d=1224285234) http://www.paytv.ws/attachment.php?attachmentid=80454&stc=1&thumb=1&d=1224285234 (http://www.paytv.ws/attachment.php?attachmentid=80454&d=1224285234) http://www.paytv.ws/attachment.php?attachmentid=80455&stc=1&thumb=1&d=1224285234 (http://www.paytv.ws/attachment.php?attachmentid=80455&d=1224285234)

otheitis
20-10-08, 19:21
DM100 - Loader & Channel Editor v. 2.0



Universal Loader und Setting Editor fur das Dreambox 100

Ermoglicht das flashen jetzige und zukunftige Image auf die Dream 100 (*.bin), sowie das sortieren sowie hochladen von Programe und Frequenzliste in satcodx (*.sdx) oder lyngsat (*.dat) format.

otheitis
03-11-08, 11:21
DM100 Version v0127

Here we release new DM100 S/W,
In this version,
- Multi SAT SCAN by diseqc is OK..
- Channel list editing with CCCAM setting by SBS is OK.
- CCCAM Key editor by web server will be released in next version.
You have to use new editor Ver2.3,
1. You have to download V0127, by editor Ver2.3,
2. Factory reset,
3. Scan Live channels and download channel lists to PC
4. Edit channel list.
5. Upload edited channel list to DM100 and check CCCAM setting.
Notice.
1. Must run editor 'Ver2.3 to download upload s/w.
2. After downloading V0127 firmware, you must run 'factory reset'.
3. Must scan 'live channels' and download and edit it by editor Ver2.3.





http://rapidshare.com/files/159455392/DM100S_MAIN_V0127_20081030.zip

otheitis
03-11-08, 11:23
DM100 Loader / Channel Editor.

New Version 2.3
Uploaded 30-10-08



http://rapidshare.com/files/159087322/LoaderChEditor.zip

otheitis
03-11-08, 14:11
Manual pt Dm100

http://www.upload-drive.com/3809/user_manual_dm100_pdf

otheitis
08-11-08, 17:49
Dm100s firmware v0128

Remember to do a Factory Reset after flashing new firmware.

Expert PIN Code: 0101

We fixed,
- DiSEqC 1.1
- USALS
- Input USER ID 15 character in cccam user name,
- FTA scan.

Note This is a TEST version and NOT a full release.

The bug with the standby button on encrypted channels is still the same.
Don't switch off into standby on encrypted channels otherwise the box crashes.


http://rapidshare.com/files/161831553/DM100S_MAIN_V0128_TEST.zip

otheitis
16-11-08, 15:04
Firmware v1.29

In this version,

We fixed
Power on/off
User ID & PW up to 15 digits for NEWCAMD, CCCAM
DiSEqC 1.1
CCCAM Port input up to 65499

We Added
SoftCAM Key Editor (in Expert Setup)

We changed
Subtitle menu by RCU subtitle button

http://www.upload-drive.com/4507/DM100S_MAIN_V0129_20081115_rar

otheitis
20-11-08, 23:40
In this version,
- Updated CCCAM, sorry for late update!
- Modified softcam key editor
- Changed subtitle
- Fixed aspect ratio
- Fixed diseqc,c

http://rapidshare.com/files/165716073/DM100S_MAIN_V0130_20081120.rar

otheitis
21-11-08, 23:16
Dm100s_main_v0131_20081121



Remember to do a factory reset after flashing.

Expert menu Pin: 0101

Release version1.31.

Fixed OSD problem while power on/off

http://rapidshare.com/files/166004685/DM100S_MAIN_V0131_20081121.zip

otheitis
03-12-08, 11:28
Firmware v1.32


fixed:
- Diseqc,
- CCCAM server

Notice:
when you update new firmware, you have do ‘factory reset’,
And all user setting will be erased. We will find a way to keep
‘user setting’ after updating new firmware without ‘factory reset’.

http://www.upload-drive.com/5518/DM100S_MAIN_V0132_20081126_rar

otheitis
03-01-09, 17:35
Remember to do a factory reset after flashing firmware.

Expert Menu Pin Code: 0101

Use New XLoader 2.4 to flash firmware.

In this version,
Fixed,
- scan problem
- TV out mode when power on/off
Added,
- Czech, Polish language
- cccam user id 20characters

Sorry, CCCAM was not updated yet.

http://rapidshare.com/files/179348230/DM100S_MAIN_V0133_20081231.zip

otheitis
17-01-09, 13:39
Release V022F from 24.12.2008 For Dreambox 100

http://rapidshare.com/files/184552969/DM100S_V022F_20081224.rar

-minus
18-01-09, 13:34
http://www.satlords.nl/board/attachment.php?attachmentid=9989

http://www.satlords.nl/board/attachment.php?attachmentid=11525

http://www.satlords.nl/board/attachment.php?attachmentid=11526
http://www.satlords.nl/board/attachment.php?attachmentid=11527
http://www.satlords.nl/board/attachment.php?attachmentid=11528

http://www.satlords.nl/board/attachment.php?attachmentid=11529

-minus
18-01-09, 13:41
Toate utilitarele si firm pentru DM100 le gasiti aici;
http://www.worldofemu.com/

otheitis
30-01-09, 19:41
In this version,

Updated CCCAM,

Updated CCCAM Multiple servers,

Changed CCCAM servers to 5 servers,

Able to on/off emulator on CCCAM by 'remote emus',

- recommend to stay 'off' on 'remote emus' for better quality.

Channel data is compatible with any later versions since Ver2.00S,

Able to share channel list with your friends,

- no other information will be included in your channel list.

Go into Main menu by pressing 'Menu button' directly without setting Antenna,

Automatic factory reset when s/w updated,

Update Astra/ Hotbird TP info,

Able to input Nagra key upto 16bytes,

Duplicated channels in network scan fixed,

Teletext fixed,



http://www.upload-drive.com/7565/DM100S_MAIN_V0200S_30JAN2009_zip

otheitis
30-01-09, 19:42
Xloader V3

http://www.upload-drive.com/7566/XLoader_v30_zip

otheitis
20-02-09, 20:31
Here we release new osd skin 'nemesis'.

No need to do factory reset, all original settings will be retained.

This is only a change of skin, user can select skin for his own taste.

http://www.upload-drive.com/8579/DM100S_MAIN_V0200N_NEMESIS_TEST_zip

otheitis
18-03-09, 16:22
Firmware: Release V027F fur DM100 S from 04.03.2009

http://www.sateliti-upload.info/index.php?direction=0&order=&directory=Dreambox/Dreambox%20100&

geo_contac
16-03-10, 16:21
Salut. Am un dreambox dm100s pe care am pus firmware dm100s_main_213s, dar numai raspunde la telecomanda si numai intra in stanby de la buton si ecran negru. S-a blocat cand schimbam canalele si am incercat si alte firmware dar degeaba.L-am pus pe lnb out de la un alt receptor de satelit in speranta ca isi va reveni.

Alta solutie nu exista????

bk35
17-07-10, 16:46
Stie cineva cu ce imagine (care sa contina si cccam) merg subtitrarile dvb pe 1W ?