PDA

View Full Version : OpenPLi-4 Gstreamer 1.6.x (master git) VU+ Uno Image



bonou2
10-12-15, 17:51
OpenPLi-4 Gstreamer 1.6.x (master git)


http://s16.postimg.cc/ib51ixfo5/Open_PLi_4_Gstreamer_1_6_x.jpg (http://postimage.org/)


https://mega.nz/#!poh02Y4Q!-md-nqZJSPGQhWzitphvfgelEw_pBFPrZGMvSP0CNLo

bonou2
16-12-15, 12:35
VU+ : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

Changes since previous release:

- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

To find the download link, search for MastaG Japhar OpenPLi 4.0

Enjoy !


https://mega.nz/#!ftMACTqR!M7QGnpFgBylaYWNoTKwnOdAWGRGBJSFfHKl6G0V0w4M

bonou2
10-01-16, 11:48
OpenPLi-4 / Gstreamer 1.7.1 (master git) images 2016-01-05


Please reflash your receiver since a software update will most likely fail.

Especially on spark/spark7162.

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:

* The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.

* Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.

- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.

* This should give us a few more MBs to work with (Dreambox *cough*).

- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.

* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.

* Enable of the zram module.

* Shipping his wifi drivers.

* VFD time is now synced every 5 minutes using a cron job.

* Software update and plugin-installation has been fixed.

* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:

* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.

- Libsoup has been updated to 2.52 (from master-next).

- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.



Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.



TODO:

- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.

- Linux 2.6.18: Look into the v4l usb drivers.

- Add Spark specific plugins by gorski.

- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.


Link:
https://mega.nz/#F!z08HlZyA!Upawo32I...e-soQ!y0tFyK5R

bonou2
18-02-16, 17:12
OpenPLi-4 / Gstreamer 1.7.1 (master git) images 2016-02-17


Hi folks,

It took me a while to build these because there were lots of small bugs and user requests.
I did my best to answer them all.
But due to my limited time I couldn't fulfill all of them, so my apologies if I didn't respond to a PM or forum-post.

So anyways.. there are lots of changes compared to my last images.
Too much for me to remember, so I guess:

- Added new receivers: Zgemma H5 and LC, Vu+ Solo 4K, XpeedC (whatever that is) and Atemio Nemesis (user-request, not tested at all so beware).
There are no Wetek builds and I ain't gonna build them, so don't ask.
- I've fixed the feed for mips32el-nf receivers (et4x00, hd1100, hd500c and xp1000).
- Oscam bumped to rev. 11211 with Joeuser's patch (yes I know you guys were waiting for this one).
- Lots of fixes for spark and spark7162 with the help of my great friend Taapat, they should be of equal quality as other PLi 4 images now.
The libeplayer versions are in the "eplayer" directory, everything else is gstreamer.
- No more patches to enigma2's servicemp3.cpp (except the one for aac transcoding), so it should reflect the current state now.
- Latest gstreamer 1.7.1 master head as of today.
- Many backports from master-next and Taapat.
- Lot's of small things I forgot.

Note:
- If you get corrupted jpeg images on spark/spark7162 the hardware decoder is not working for you, simply login using telnet and type:
rm -f /usr/lib/libmme_host.so
Then restart enigma2 and they should display fine
- Zram is now disabled by default on spark/spark7162, if would like to use it anyways, simply login using telnet and type:
touch /etc/gimme-zram
Then reboot your receiver.

If I didn't mess up badly this time, this will be my last round of public images.
I don't think there's any benefit for releasing gstreamer master head images anymore, since the next stable gstreamer release will hit master-next and oe-alliance anyways.
And most work went into supporting non-PLi-supported receivers which takes lots and lots of time.


Thank you all for the great feedback !
You're the best!



https://mega.nz/#F!mk8jBRLQ!4_3w31ZR...n_gfA!vwkgGCpa