View Full Version : Oscam - emu
Se dezvolta un patch la oscam pentru a merge si cu key.
Supported systems
=================
Currently only the following crypto systems are available:
- Cryptoworks
- NDS
- Viaaccess-2.3
All of these are basicly working but far from complete so anyone filling in blanks is welcome...
TODO
====
Work has to be done on the following items:
- Add other encryption systems
- Add keyfile support
- More keys
https://github.com/oscam-emu/oscam-emu
Oscam - emu s-a facut baiat mare, stie mai multe sisteme de codare.
Azi am compilat sh40 la zi si merge brici !
OSCam-emu: Open Source Conditional Access Module Emulator
=========================================================
OSCam-emu is an Oscam addon module to include emulator support and other functionality that collides with the goal of the original oscam developers.
This patch creates a virtual card reader which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.
Key file ("SoftCam.Key"):
OSCam-emu does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".
You may use OSEmu instead and add it as a reader to your plain oscam server.
OSEmu can be found at https://github.com/oscam-emu/OSEmu
Supported systems
=================
Currently only the following crypto systems are available:
- Cryptoworks
- NDS (proof off concept)
- Viaccess 1/2/3
- Nagra 2
- Irdeto 2
All of these are basically working, but far from complete so anyone filling in blanks is welcome...
TODO
====
Work has to be done on the following items:
- Add other encryption systems
Version history
===============
OSCam-emu history is accessible through GitHub commits at:
https://github.com/oscam-emu/oscam-emu
Building OSCam-emu from source
==========================
- Get the lastest oscam sources from SVN:
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn
- Save the oscam-emu.patch file
wget https://github.com/oscam-emu/oscam-emu/raw/master/oscam-emu.patch
- Go to oscam-svn directory.
- Patch the source with the EMU patch:
patch -p0 < ../oscam-emu.patch
- OR: Instead of 'patch', you may also use 'svn patch':
svn patch ../oscam-emu.patch
- Put a SoftCam.Key file into the oscam-svn directory (for example from skystar.org)
Note: This does not apply for Mac OSX, SoftCam.Key cannot be integrated on this system at the moment.
- Run `./config.sh -g` to choose the features you want.
- Run `make` to compile OSCam.
Help and Support
================
You may visit our issues system for filling in bug reports regarding EMU issues.
https://github.com/oscam-emu/oscam-emu/issues
Configuration wiki:
http://www.streamboard.tv/wiki/index.php/OSCam
S-a adaugat si BISS la OscamEMU
Supported systems
=================
Currently only the following crypto systems are available:
- Cryptoworks
- SoftNDS
- Viaccess 1/2/3
- Nagra 2
- Irdeto 2
- Biss (Mode 1) [Note: only 1 key possible for a sid/pid combination, use the oscam constcw reader if you need more]
All of these are basically working, but far from complete so anyone filling in blanks is welcome...
Testat si de mine pe ultima versiune de Oscam.
Functioneaza impecabil.
confirm.
Loadbalance statistics for reader emulator
Channel
Channelname
ECM Length
Result
Avg-Time
Last-Time
Count
Last checked/ found
0500:023800:36B3:08E2
0500:36B3 unknown
002A
found
6
18
3
12.11.14 21:55:34
0500:030B00:2025:1511
0500:2025 unknown
0042
found
1
1
1
12.11.14 21:44:05
0500:030B00:2213:1511
0500:2213 unknown
0042
found
7
7
1
12.11.14 21:57:23
0500:030B00:2219:1511
0500:2219 unknown
0042
found
1
1
1
12.11.14 21:45:32
0500:030B00:221A:1511
0500:221A unknown
0042
found
1
1
12
12.11.14 22:09:39
0500:030B00:25ED:1511
0500:25ED unknown
0042
found
1
1
1
12.11.14 21:50:06
0500:030B00:264A:1511
0500:264A unknown
0042
found
1
1
1
12.11.14 22:12:17
0500:030B00:264E:1511
0500:264E unknown
0042
found
1
1
1
12.11.14 21:39:52
090F:000000:0960:00CC
090F:0960 unknown
0094
found
1
1
1
12.11.14 21:58:53
090F:000000:09A6:00CC
090F:09A6 unknown
0094
found
1
1
1
12.11.14 21:58:25
090F:000000:0DAE:0210
090F:0DAE unknown
0094
found
1
1
1
12.11.14 21:57:50
090F:000000:0DB6:0210
090F:0DB6 unknown
0094
found
1
1
1
12.11.14 21:35:01
0D05:000004:1330:0000
0D05:1330 unknown
009C
found
1
1
1
12.11.14 22:12:18
0D05:000004:32C9:0000
0D05:32C9 unknown
009C
found
1
1
1
12.11.14 22:03:37
0D05:000004:32CC:0000
0D05:32CC unknown
009C
found
1
1
3
12.11.14 22:05:25
0D05:000004:32CD:0000
0D05:32CD unknown
009C
found
1
1
1
12.11.14 22:03:55
0D05:000004:32CF:0000
0D05:32CF unknown
009C
found
1
1
2
12.11.14 21:44:04
0D05:000004:32D1:0000
0D05:32D1 unknown
009C
found
1
1
1
12.11.14 22:14:39
0D05:000004:32D2:0000
0D05:32D2 unknown
009C
found
1
1
11
12.11.14 22:15:16
0D05:000004:32D3:0000
0D05:32D3 unknown
009C
found
1
1
3
12.11.14 22:07:15
0D05:000004:332D:0000
0D05:332D unknown
009C
found
1
1
1
12.11.14 21:58:43
0D05:000004:4E27:0000
0D05:4E27 unknown
009C
found
1
1
1
12.11.14 21:58:49
Total ECM count: 50
un tutorial se poate?
pe langa patch-ul oscam-emu ce module sunt absolut necesare ?
cum se configureaza readerul de key?
Salut apokalyps03,
Cauta tutorial pentru simplebuild.
Este recomandat sa ai ubuntu.
Reader-ul se configurează automat.
Simplebuild iti instalează toate utilitarele necesare compilarii și executării oscam-ului.
am simplebuild.
am descarcat oscam-emu.patch (https://github.com/oscam-emu/oscam-emu/blob/master/oscam-emu.patch) in patches. am dat la simplebuild use patches si pare sa-l compileze cu patch.
eu mai dezactivez din module ...ca n-am nevoie de toate tipurile de readere, de protocoale. de-aia am intrebat ce e minimum necesar.
pot sa dai un screen cum iti apre readerul in webif?
Putem face o lista cu canalele/providerii care mai merg cu k3y ?
Lista completa aici (https://docs.google.com/spreadsheets/d/1xdNe14FLra7OyHvCdEaO5vsc1vhZitVVRqGUF5_oJrw/edit?usp=sharing), dupa o luna de functionare.
---------- Post added at 14:41 ---------- Previous post was at 14:33 ----------
Emulatorul nu contine toti algoritmii, inca!
Se lucreaza...
Salut apoklyps3 (http://sateliti.info/member.php/10481-apoklyps3),
Aplica patch-ul manual.
vezi instructiunile in github de unde descarci patch-ul.
am reusit cu simple build. mutulmesc oricum.
Cum adica va merge brici?. Brici pe PC poate.
Pe DM800 nu se confirma.
Cu oscam-emu r10013 share si dvbapi activ desi ecm e mic sau aproape mic (reader emu e setat delay default 60ms) deschide din NET. Luat reteaua, adica fara NET, la zapping cu norme de codare diferite ex. Cryptoworks Viaccess are un delay de te plictisesti asteptand sa decodeze. Dupa ce intra, nu mai sunt probleme. Activand apoi reteaua, sta pe emu. Daca schimbi canalul iara ia de pe NET. Asta inseamna ca merge brici?
Mai trebuie sa se coaca.
Alte pareri? Poate gresesc eu ceva si imi scapa.
E din setari.
De exemplu la 1801 daca nu setezi tunneling oscam incearca sa ia din net pana invata balancerul localul tau si nici atunci nu e sigur ca va lua doar din emu.
Pune: lb_auto_betatunnel_mode din intervalul 3 - 6 sau dezactiveaza Auto Betatunnel.
In oscam.dvbapi pune P:1801.
Asemenea la celelalte sisteme. Trebuie sa ai balancerul activ si bine configurat si in unele situatii adaugi un I sau un P in oscam.dvbapi
Se anunta vremuri interesante pt Power Vu. Au implementat in oscam-emu.patch de la linia 2655. Mai multe aici (https://github.com/oscam-emu/oscam-emu/blob/master/oscam-emu.patch)
laleauaneagra
19-04-15, 20:24
am pus si eu azi de proba....dar nici nu vrea sa miroase emu..cand il gaseste sta ce sta si pleaca pe alte linii
testat pe ORF si SRG
am sa pun acum ceva prio pe api....ciudat totusi
---------- Post added at 19:24 ---------- Previous post was at 19:08 ----------
Lista completa aici (https://docs.google.com/spreadsheets/d/1xdNe14FLra7OyHvCdEaO5vsc1vhZitVVRqGUF5_oJrw/edit?usp=sharing), dupa o luna de functionare.
---------- Post added at 14:41 ---------- Previous post was at 14:33 ----------
Emulatorul nu contine toti algoritmii, inca!
Se lucreaza...
mai e valabila lista asta?
Eu folosesc de luni de zile oscam cu patch, impachetat cu simplebuild. Merge super si cu SRG si ORF si Digi cablu si sd pe 7 est. Sa vedem ce va fi si cu Power VU. Am gasit ceva si pt placa de satelit, modulul pt vPlug - Power vu, dar n-am timp acum sa testez. E mai interesant sa vad Fed Cup pe 15 W 11541 - Pol: H - SR: 7500 h264, feedul pt Dolce cu audio ro. Aici (http://dvb-upload.com/index.php?action=download&pid=375394) modulul pt vPlug.
A reusit cineva sa vada PowerVu cu oscam emu ?
Jackuzzy de unde ai key-le de NDS ? Vad ca in lista ai si ceva NDS, cred ca de pe 4.8*E daca nu ma insel.
Aia e veche. Cea noua are mai multe. In general imi deschide turcii la 7e, canal digitaal, cateva canale de la UPC, ceva de la 13E, etc. Nu am stat sa caut. Sunt sigur ca se deschid multe canale. Oricum, cine se uita? Sunt mii de canale tv. Ah... PowerVU, uitasem. Nici i șansă! Nu comercializează soluția către individuali.
Sent from my A0001 using Tapatalk
.... Ah... PowerVU, uitasem. Nici i șansă! Nu comercializează soluția către individuali.
Sent from my A0001 using Tapatalk
"Oscam Emu now support opening of PowerVu channels in Enigma2 through "Stream Relay method". Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma2. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2. So, the stream relay needs a fast CPU. For example, CPU usage on VU+ Duo2 for SD Channel 5% & for HD Channel is 15%. Not every STB is fast enough. So only those receivers will be suitable which have powerful CPUs, like Vu+ Solo2, Duo2 or Dreambox DM800SE V2 etc."
Salutare cine ma poate ajuta cu un oscam emu.ipk cel mai nou pentru Blackhole?
poate cineva daca vrea sa trimita unul pentru mine in pm va rog .
@darkman (http://sateliti.info/member.php/15464-darkman)
de ce nu copiezi oscam_ul ptr ca de la v3.0.1 nu mai funktioneaza ipk pe BH
Oscam 11209 preconfigurat, pentru BlackHole 3.0.x
- card tvr/freesat viaccess
- card tvr/freesat conax
- card focussat
- AU
-pornirea softcamului se face din blue panel (tasta albastra)
-weibif user admin /password admin port 8888
- acesare se face pe adresa http://ipvu:8888/readers.html si se va activata cartela posedata de dumneavoastra
Oscam mipsel aici (https://mega.nz/#!ylMklYAJ!2Z61l2LW5f_Ne2tjTmKkh16Vu8pM9tz9kPOpitBP3OQ)
Ocam-emu (nu contine Softcam.key) mipsel aici (https://mega.nz/#!ewsijK5C!CWLqRejlyWhKzEfJ3qwn8ZzjxRPMCBUORoKVod-RbQo)
Oscam armv7 (Vu SOLO 4k) aici (https://mega.nz/#!GssQ0bIA!qtcYrhM_wXUKec1tDEBCI-RqcKRa3zbu3Pws97GMpek)
multumesc foarte mult :)
---------- Post added at 08:16 ---------- Previous post was at 08:12 ----------
sombra am incercat meroda de copiere dar nu face nimic nu deschide nimic am dat chmd 755 si tot cum tebuie dar nimic de aia am cerut ipk ca cu ipk instalat functioneaza
Stii sa pornesti manual oscamul din telnet?
nu prea ce trebuie facut ?
ca pina acum am instalat un ipk si ala functiona normal dar acum nimic alea vechi daca pun asa functioneza gen oscam 11102 emu de ex .
---------- Post added at 10:10 ---------- Previous post was at 10:06 ----------
inca o intrebare daca am acum pus in box oscam 11102 emu si suprascriu cu oscam 11211 emu si reglez tot atunci trebuie pornit din telnet ??
Daca ai un ipk functional, poti schimba doar executabilul oscam pastrand doar numele celui original.
La atribute pui 755 !
Dupa ce le schimbi dai un emu stop apoi emu start din meniuri (panel etc), nu e necesar telnet pentru asta.
asa am facut si nu merge de aia intreb cum si ce dupa ce fac toate astea nu deschide nimic si nu situ und e problema ??
Depinde cum are oscamu preconfigurata (la compilare) calea filei de setari.
Poate fi in /var/keys la unu din ele si in alta parte la celalalt.
Oricum asta se poate verifica din telnet.
@darkman (http://sateliti.info/member.php/15464-darkman)
Poftim klick (http://www.xup.in/dl,49338294/Cam_BH_3.0.rar/) bagale asa cum sint in box la tine Atribute 755 , box new start ....
S-a reluat munca la OSEMU:
October 2017 update (revised)
As of October 2017 the BISS code has been greatly improved.
The old code distinguished channels only by using the service id (sid) and any one of the ecm pid (which for 99.99% of the channels is the same) or the channel's video and audio pids. As a result there were too many key clashes in the SoftCam.Key file. These formal (legacy) methods of channel identification remain in the new code as well for backwards compatibility and for those users that have a small number of keys in their SoftCam.Key and don't experience collisions. This way no editing is needed for the SoftCam.Key to work with the revised BISS code.
The revised code makes key searches based on crc32 hashes. There are two different hashes available:
The namespace hash, which is calculated by the enigma2 namespace (orbital position, frequency, polarization) and the service id of the channel. These two alone are enough to create a unique channel identifier.
There's also a universal hash, which is calculated using every pid of the channel (service id, pmt, video and audio pids). This universal hash, while not being unique as the namespace hash, is available on every box (enigma and non-enigma) and is a better alternative than oscam's constant cw protocol, since it takes audio pids into account, as well.
Using hashes to match keys, we get a distinct (unique in the case of namespace hash) identifier for each channel, which makes OSCam-Emu ideal for descrambling not only a huge amount of regular channels, but also for occasional transmitions (feeds).
Va rog un oscam emu pentru raspberry pi3,si cum pot sa-l pun, ce comenzi trebuiesc.
Multumesc.
@xrm
aici (https://mega.nz/#!WslkEK5Z!xXX3Xk6s7kw-8YJZYeUVwfrdYFc3eGa2Lwb9IB-fTXw) ai unul compilat la zi cu tot ce-ti trebuie.
folderul de config e in /usr/local/etc/
extragi arhiva, il redenumesti in oscam, si il pui in /usr/bin/
Din consola , sub root, executi
chmod 755 /usr/bin/oscam
apt update && apt upgrade
apt install libusb-1.0 libssl-dev libpcsclite1 libpcsclite-dev nano
Aici (http://techblog.thomserve.co.uk/2016/09/30/systemd-script-for-oscam/) gasesti informatii despre cum sa-ti creezi un script systemd.
De configurat ... fiecare are propriul lui server si la fiecare e altfel ... citeste aici
(http://sateliti.info/showthread.php/28985-OSCAM-configurare-de-la-A-la-Z)
Ok, multumesc.
Mai am o intrebare:
cum sterg vechiul oscam(normal) de pe raspberry pi3,ca sa-l adaug pe acesta?
Il cauti unde este executabilul, il redenumesti la fel si il pui peste.
Locatia probabila este in /usr/bin/ sau in /usr/local/bin/
Cel mai usor cauti in service /etc/init.d/oscam (asta daca ai sysvinit)
Salutare, utimele versiuni de oscam nu au CacheEX, din cate am citit trebuie compilat oscam-ul lucru la care nu ma pricep, poate compila cineva o versiune si sa o puna pe site.
Multumesc !
depinde de cine a compilat aceea versiune, posibil sa fie o versiune lite. am rugamintea sa specifici si arhitectura pentru care doresti oscam-ul.
are integrate prajiturile sau are nevoie de softcam.key?
eu am pus separat osemu + reader in oscam din el....
Salut... si Hristos a Inviat! de o saptamana ,ma lovesc de o problema. Am un Octgon sf8008 cu o imagine Openatv 6.2 .Si OSCam r11517-795.
Scriu linia cccam [in oscam] readers, o salvez, se salveaza, dar nu se conecteaza, nu deschide....un ajutor va rog. Mentionez ca sunt novice in oscam. Dar promit ca o sa-mi pierd toata vara cu el. Multumesc pentru orice sfat!Chiar si in pm. va rog!
Foloseşte interfaţa web a Oscamului, şi va fi mai uşor.
Am si eu o intrebare pentru cunoscatori. Am instalat ultima versiune de oscam emu. Am pus un softcam pt power vu key de pe 0.8W. A mers ok cateva zile apoi s-a oprit. Presupun ca s-au schimbat cheile. Emulatorul din oscam pt power face AU la Power VU? Trebuie facuta o setare speciala sau trebuie de fiecare data sa caut un softcam cu key actualizate? Sau trebuie sa activez ceva din oscam pt AU?
Astea sunt setarile de reader:
[reader]
label = emulator
description = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,00211 1,007301;2600:000000;2602:000000;2610:000000
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
[reader]
label = SoftCam
description = SoftCam
protocol = emu
device = /etc/tuxbox/config/SoftCam.Key
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;260 0:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 4
multumesc
Salutare
Cine ma ajuta si pe mine....In ce varianta de Oscam sau Cccam merge Cartela de Zaharos Ro 39e si pe ce configuratie? ....Multumesc anticipat si Sanatate Maxima!!!!
Pe forum subiectul e inchis, NU MERGE!
Zvonuri "e" multe, prietenii te recomanda.
Buna seara, CRACIUN FERICIT tuturor.
Am nevoie de putin ajutor referitor la setarile oscam.
Am un receptor Amiko VIPER 4K combo. Am tot cautat si incercat diferite variante pentru a seta oscam ca atunci cand deschid un un canal dvb-c sa deschida din softcam, nu dintr-o linie a unui partener.
Multumesc .
Adauga un reader-emu si softcam
Am reader emu si softcam, dar intai deschide din linii, ia la rand 1, 2, 3 linii si pana la urma ajunge si la emu.
As fi vrut niste setari care sa trimita direct la emu canalele codate de pe cablu.
Pui in oscam.dvbapi P: 1801
Stiam eu ca trebuie sa fie o solutie simpla.
Doar ca asa dureaza destul de mult pana deschide.
Daca specific serviciile, ar merge mai repede ?
este corect daca pun asa de exemplu
P: 1801:000000:028A #Digi Cablu HBO ROMANIA
Activează load balancerul și va face asa doar la prima deschidere.
Contează sa îl pui pe 1, și poti seta filele de balancer sa fie salvate in memoria nevolatila.
Pe aceeasi masina am oscam si osemu. Am conectat osemu la oscam, dar nu vrea sa traga din el, clientul din oscam ia din alta parte, tot din emu.
Fisierul necesar este acelasi care functioneaza pe un box. Unde e chichita, ca nu-mi dau seama.
OSemu (http://192.168.3.18:19702/readerconfig.html?label=OSemu)
ON (http://192.168.3.18:19702/status.html#)
127.0.0.1
49524
cs357x
0157:1801@002111
Fxxxxxxx HD [JIJI TV] (http://192.168.3.18:19702/files.html?file=oscam.srvid2)
no data (http://192.168.3.18:19702/readerstats.html?label=OSemu&show=0)
01:16:19
00:00:34
CONNECTED
vu (http://192.168.3.18:19702/user_edit.html?user=duo2)
ON (http://192.168.3.18:19702/status.html#)
192.168.9.2
59269
cccam_ext (cx-aio) (2.3.0-3367)
0157:1801@002111
Fxxxxxxxx HD [jIjI TV] (http://192.168.3.18:19702/files.html?file=oscam.srvid2)
cablu (3 ms) (http://192.168.3.18:19702/readerstats.html?label=cabluduok&show=0)
01:18:27
00:00:08
OK
Vreau sa adaug un smartreader dar oscamul emu nu-l vede.
Are cineva vreo solutie sau asa a fost compilat fara libusb?
Pana la urma, daca nu am gasit, am compilat eu unul.
Daca ii trebuie cuiva, e postat pentru 30 zile
Link (http://ufile.io/g44nyhjf)
Version: oscam-1.20_svn-r11704-798
Compiler: arm-linux-gnueabihf-libusb
Box type: vuduo4k (generic)
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
Cache exchange AIO support: no
CW Cycle Check support: no
LCD support: no
LED support: no
Clockfix with realtime clock: no
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes
camd 3.3x: no
camd 3.5 UDP: no
camd 3.5 TCP: no
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
scam: no
serial: no
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: no - no EMM support!
Conax: yes
Cryptoworks: no - no EMM support!
Seca: no - no EMM support!
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: no - no EMM support!
TONGFANG: no - no EMM support!
Bulcrypt: no - no EMM support!
Griffin: no - no EMM support!
DGCrypt: no - no EMM support!
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: no
e executabilul din /usr/bin/
Are numele schimbat...
LINK (https://ufile.io/nef0ju8e)
valabil 30 zile
oscam-svn11711-solo4k-webif-dvbapi-libusb-emu798
Aceleasi setari/optiuni
daca da eroare:
cd /usr/lib
ln -s libcrypto.so.1.0.0 libcrypto.so.0.9.8
reboot
Buna ziua. M-ar interesa sa testez modul de functionare al cheilor constant.cw. De ce am nevoie si cum as putea face acest lucru in modul cel mai simplu?
Faci un reader protocol = constcw unde dai calea catre o lista constant.cw cu ce trebuie care va fi pusa langa celelalte fisiere in config.
Ai aici cateva exemple:
https://github.com/nrdn226/enigma2/blob/master/oscam.server (https://github.com/nrdn226/enigma2/blob/master/oscam.server)
Multumesc! Pe 13E pot sa testez constant.cw?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.