View Full Version : N Line in spark
I have an N line for spark. Loaded it in oscam server & cccam.conf bur no go.
Is any specific version of oscam that works on spark ?
read tutorials spark here http://sateliti.info/showthread.php?22725-Oscam-pe-Spark-...exemplu&p=164202&viewfull=1#post164202 (http://sateliti.info/showthread.php?22725-Oscam-pe-Spark-...exemplu)
in oscam.server put new reader :
[reader]
label = tvr
enable = 1
protocol = internal
device = /dev/sci0
caid = 0500
ident = 0500:fff720,025900,025910
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,2,4
lb_weight = 100
[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100
[reader]
label = linie_C
enable = 1
protocol = cccam
device = host.dyndns.com,12000
user = user
password = parola
inactivitytimeout = 1
reconnecttimeout = 30
group = 1
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1
in oscam.user put new [account] for each client is different account
[account]
user = alien
pwd = amiko
group = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722
chid = 0604:000014,000069,0000F4,0000F5,0000FA
cccmaxhops = 2
keepalive = 1
# This is the clients ( users ) list
[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1
tHANK YOU.
will do 2nd part tonight.
Doesn't work.
any other suggestions ?
please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image
so...I think you do not do something right
Each space must be respected, every comma
[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100
here " host.dyndnds.com " is Your line N
34000 is a port that you have to open it in router ( you open port in your router? )
check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on
user and password need to set in oscam.user in new account
[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1
The same N-line settings work on e2 but on spark.
please say what does not?
line local N ===> not open the image you tv channels?
or
N line as a customer in sharing TV channels do not open image
so...I think you do not do something right
Each space must be respected, every comma
[reader]
label = linie_N
enable = 1
protocol = newcamd
device = host.dyndnds.com,34000
key = 0102030405060708091011121314
user = user
password = parola
reconnecttimeout = 30
group = 1
lb_weight = 100
here " host.dyndnds.com " is Your line N
34000 is a port that you have to open it in router ( you open port in your router? )
check you can do here ( take a test if your port here )http://www.whatsmyip.org/port-scanner/
do you check (scanner)if your oscam is on
user and password need to set in oscam.user in new account
[account]
user = user
pwd = parola
group = 1
uniq = 1
monlevel = 4
cccmaxhops = 1
keepalive = 1
I do have all these settings in o.server & o.user
What needs to be activated from plugin menu ?
I had tried all combinations and got the same: "scrambled or not running"
Aru you guys running spark 1.2.50 or earlier versions ?
somewhere in the receiver menu ====> activated "oscam" or another system for share
(to many receivers) usually the blue button is for this help
I not have this receiver
now you are talking. You do not have this stb but you are giving advice !!!!
There is no blue button for spark sys.
on remote control is blue button
advice applies to any configuration "oscam" on any satellite receiver with Linux
IME!
To activate plugin in spark, do this:
MENU-Plug in--- and here you will see the installed plugins list. You use N line, so you must start mgcamd.sh4.
If you don`t see the plugins there, it`s mean you must to install it first (with a memory stick).
If you need help, please write me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.