PDA

View Full Version : Project tiTan by nit - powered by AAF



zildan
04-10-11, 02:41
Cercetand in amanunt Project tiTan am descoperit ca functioneaza si pe aparatele SPARK si alte clone.
Porneste in cateva secunde direct cu imagine.

em: 59864K used, 33612K free, 0K shrd, 0K buff, 36380K cached
CPU: 0.1% usr 4.3% sys 0.0% nic 95.2% idle 0.0% io 0.1% irq 0.0% sirq
Load average: 14.36 13.86 10.24 1/71 14211

cu oscamul activ !!!

Acum incerc sa rezolv telecomanda!

---------- Post added at 02:41 ---------- Previous post was at 01:32 ----------

Am rezolvat si telecomanda, se misca bine si stabil.
Am folosit o imagine baza E2 RSP stm24 peste care am startat Project tiTan.



DuckBox_RSP:/dev/input# free
total used free shared buffers
Mem: 93476 62924 30552 0 0
-/+ buffers: 62924 30552
Swap: 0 0 0


Mem: 63020K used, 30456K free, 0K shrd, 0K buff, 36448K cached
CPU: 0.0% usr 33.3% sys 0.0% nic 66.6% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 13.27 12.76 12.68 1/78 21298

Nu era pe FTA!

Znuff
04-10-11, 03:12
load avg. ala e imens

zildan
04-10-11, 16:22
Ca si concluzii dupa 12 ore de teste (a functionat continuu):
- necesita resurse de memorie foarte putine

DuckBox_RSP:~# free
total used free shared buffers
Mem: 93476 30716 62760 0 0
-/+ buffers: 30716 62760
Swap: 0 0 0

Mem: 30956K used, 62520K free, 0K shrd, 0K buff, 8688K cached
CPU: 0.3% usr 0.7% sys 0.0% nic 98.8% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 12.15 11.30 11.52 1/76 5962



- lista de canale se poate schimba, softul furnizat nu introduce si satelitii in lista de config
- subtitrarile DVB merg dar mai e de lucru la aspect
- nu are subtitrari la Media Player
- se pot ajusta: video de format, culoare, contrast, mod video si in Media Player
- nu scaneaza si nu stie decat diseqc simplu cu 4 sateliti.
- zappingul e bun dar nu cred ca e mai rapid decat in e2
- startul aplicatiei ---- sub 5 sec , deci practic dupa ce se incarca kenelul si modulele, se starteaza TITAN si apare imaginea in max 5 sec!
- e gandit din start cu emu si plugins, skin etc

Daca o sa am timp revin cu concluzii, poate si cu ceva capturi de ecran.

mark2
04-10-11, 16:51
Zildan
Add to upload that others can try :clap:

plejka2
04-10-11, 17:37
zildan give us to try please.

grle44
04-10-11, 17:43
Please You @zildan ..
Upload a file to download to test.

Thanks:clap::clap:

mark2
04-10-11, 18:15
@zildan
Does titan to Amiko Alien ?
Do you work at Titan stm23? If not, how did you do stm24? whether the error in the cmdline for the JFFS2 partition?

Thank you very much !!

zildan
04-10-11, 18:44
Titan is compiled on STM24 linux.
I have a e2 STM24 NFS image for Alien
Flash image is in development.

grle44
04-10-11, 19:36
@ zildan ..
Why not put the Titan to the rest of the test?
It's not ok:!::cool2:

zildan
04-10-11, 19:41
This (http://aaf-board.com/forum/showthread.php?73979-Titan-in-E2-Image-betreiben) is the procedure if you have a STM24 e2 image.

grle44
04-10-11, 19:47
So tell us how to put the Titan AMIKO ALIEN?
Why are we doing?
Why are you selfish?

plejka2
04-10-11, 23:54
Ok but we dont professionals to put that in alien.Can you give as or what?Why you open this topic?What we have of it if you work and we do not have this?

zildan
05-10-11, 00:31
Because we did tests on future RSP Image, which is in development.
There are some small problems before to be published.

---------- Post added at 00:31 ---------- Previous post was at 00:06 ----------


DuckBox_RSP:~# uname -a
Linux DuckBox_RSP 2.6.32.28_stm24_0207 #1 PREEMPT Mon Sep 26 02:08:16 EEST 2011 sh4 GNU/Linux
DuckBox_RSP:~#

plejka2
05-10-11, 00:39
When the entire all 7 months i have alien and i have nothing.Why nothing because many are doing things and nobody nothing completes.So we have a spark that works as well but ....
Each enigma2 heave a problem... no one is completed(rsp,all rusian,eos,pkt).... 7 months!!!!!!Very sad :(

Sofat3ster
08-10-11, 18:29
Titan is compiled on STM24 linux.
I have a e2 STM24 NFS image for Alien
Flash image is in development.

Compiling in STM23 should be no problem, but most receivers now use STM24 because of performance.
Titan will be released to duckbox git when all main functions are working. (maybe before christmas)
In next public alpha image there will be MultiLanguage support.
If someone would add an own language there are .po files like in E2 in /var/usr/local/share/titan/po/
If you want to add romanian for example you can take one of the pos and translate this to romanian.
You can use Poedit (http://www.poedit.net/download.php) to easily create an translation file.
If you have one we will add this to next releases.

here are a testimage for translation testing.(only default skin shows all menus at the moment)
titan_STM23_m10166.tar.gz (http://www.file-upload.net/download-3789053/titan_STM23_m10166.tar.gz.html)
titan_STM24_m10166.tar.gz (http://www.file-upload.net/download-3789054/titan_STM24_m10166.tar.gz.html)

---------- Post added at 17:29 ---------- Previous post was at 16:52 ----------

To test titan on your box copy titan archive to your E2 Image root / and connect via telnet


cd /
killall -9 rcS
killall -9 enigma2
tar xzf titan_m*
titan /var/etc/titan/titan.cfg

In /var/etc/titan/titan.cfg you can

rcconfig=/var/usr/local/share/titan/rcconfig
choose the right remote control config

rcconfig=/var/usr/local/share/titan/rcconfig.spark
(I don't know if the spark config is right because at the moment no one from AAF Developers owns a spark box.)
Maybe you must correct this to get remote control working.

zildan
08-10-11, 20:11
Thank you for your support and we hope that we can actively contribute to development.

for SPARK RC :
in /var/etc/titan/titan.cfg

rcdev=/dev/input/event1
rcconfig=/var/etc/titan/rcconfig.spark
and rcconfig.spark

rcok=352
rcexit=102
rcup=103
rcdown=108
rcleft=105
rcright=106
rcmenu=139
rcff=208
rcfr=168
rcvolup=115
rcvoldown=114
rcchup=104
rcchdown=109
rcmute=113
rcred=398
rcblue=401
rcgreen=399
rcyellow=400
rchelp=138
rcinfo=358
rc1=2
rc2=3
rc3=4
rc4=5
rc5=6
rc6=7
rc7=8
rc8=9
rc9=10
rc0=11
rcstop=128
rcepg=365
rcarchive=361
rcmedia=226
rcplay=207
rcpause=119
rcrecord=167
rctext=388
rcpower=116

Sofat3ster
10-10-11, 12:59
Here is the current state with some fixes which was released as Titan Alpha 1.1 for AAF Supported boxes.

titan_STM23_m10258.tar.gz (http://www.file-upload.net/download-3793431/titan_STM23_m10258.tar.gz.html)
titan_STM24_m10258.tar.gz (http://www.file-upload.net/download-3793432/titan_STM24_m10258.tar.gz.html)

plejka2
10-10-11, 15:21
I think thats no work:(Amiko:~# cd /
Amiko:/# killall -9 rcS
Amiko:/# killall -9 enigma2
Amiko:/# tar xzf titan_m*
tar: can't open 'titan_m*': No such file or directory
Amiko:/# tar xzf titan_m*
tar: can't open 'titan_m*': No such file or directory
Amiko:/# tar xzf titan*
Amiko:/# titan /var/etc/titan/titan.cfg
[titan] copyright by NIT - version 1.1
[titan] crontribut: obi, black, dvboxer, oxygen, gost
[titan] using config: /var/etc/titan/titan.cfg
[titan] error: can't open /var/etc/autostart/start-config, err=No such file or directory, file=config.h, func=readconfig, line=127
ls: /sys/block/sd*: No such file or directory
[titan] error: Font /var/usr/share/fonts/default.ttf failed, file=font.h, func=MyFaceRequester, line=13
[titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=openfont, line=147
[titan] error: open fontfile1 font, file=titan.c, func=main, line=348
Amiko:/# titan /var/etc/titan/titan.cfg
[titan] copyright by NIT - version 1.1
[titan] crontribut: obi, black, dvboxer, oxygen, gost
[titan] using config: /var/etc/titan/titan.cfg
[titan] error: can't open
/var/etc/autostart/start-config, err=No such file or directory, file=config.h, func=readconfig, line=127
ls: /sys/block/sd*: No such file or directory
[titan] error: Font /var/usr/share/fonts/default.ttf failed, file=font.h, func=MyFaceRequester, line=13
[titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=openfont, line=147
[titan] error: open fontfile1 font, file=titan.c, func=main, line=348
Amiko:/#

mark2
10-10-11, 16:42
I used an AR-Team Enigma2
do not like the Alien !!!!the display says tit ,black screen !!!!


Amiko:/# cd /
Amiko:/# killall -9 rcS
killall: rcS: no process killed
Amiko:/# killall -9 enigma2
killall: enigma2: no process killed
Amiko:/# tar xzf titan_m*
Amiko:/# titan /var/etc/titan/titan.cfg
[titan] copyright by NIT - version 1.1
[titan] crontribut: obi, black, dvboxer, oxygen, gost
[titan] using config: /var/etc/titan/titan.cfg
[titan] error: can't open /var/etc/autostart/start-config, err=No such file or directory, file=config.h, func=readconfig, line=127
ls: /sys/block/sd*: No such file or directory
[titan] error: Font /var/usr/share/fonts/default.ttf failed, file=font.h, func=MyFaceRequester, line=13
[titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=openfont, line=147
[titan] error: open fontfile1 font, file=titan.c, func=main, line=348

zildan
11-10-11, 00:01
There are two changes needed to start TITAN:
-before extracting a symlink is required


cd var
ln -s /usr usr



LE:

First lynk solve config fonts path.


-a font path in config is wrong

in titan.cfg replace:
fontfile1=/var/usr/share/fonts/default.ttf
with
fontfile1=/usr/share/fonts/default.ttf

mark2
11-10-11, 15:51
spark:~# cd /
spark:/# killall -9 rcS
spark:/# killall -9 enigma2
spark:/# tar xzf titan_m*
spark:/# titan /var/etc/titan/titan.cfg
[titan] copyright by NIT - version 1.1
[titan] crontribut: obi, black, dvboxer, oxygen, gost
[titan] using config: /var/etc/titan/titan.cfg
[titan] error: can't open /var/etc/autostart/start-config, err=No such file or
irectory, file=config.h, func=readconfig, line=127

/dev/sda:
setting standby to 0
(off)
hdparm: HDIO_DRIVE_CMD: Invalid argument
[titan] error: Font /var/usr/share/fonts/default.ttf failed, file=font.h, func=
yFaceRequester, line=13
[titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=op
nfont, line=147
[titan] error: open fontfile1 font, file=titan.c, func=main, line=348
spark:/#

do not know why but it does not work !!

TiTan cfg plaease rename !
http://www.2shared.com/file/0Hl8Z3O8/titan.html

Sofat3ster
11-10-11, 16:03
spark:/# titan /var/etc/titan/titan.cfg

[titan] error: Font /var/usr/share/fonts/default.ttf failed, file=font.h, func=

do not know why but it does not work !!

as zildan wrote you have to change the fontpath in titan.cfg
to /usr/share/fonts/default.ttf because there seems to be the fontfile on spark.

Sofat3ster
15-10-11, 00:40
one AAF Team Member bought a spark box. So I think next with next titan release there will be a complete Spark flash Image ;)