PDA

View Full Version : UFS910 mod 2.03 Oscam Stapi



sarkany
03-04-11, 11:19
UFS910 mod image based on original 2:03
Modified 2:03 Image of Kathrein:

- patched kernel so that a second boot loader (2nd BL) can be installed for BarryAllen
- ftdi and pl2303 driver integrated to operate an external USB card reader (eg Smargo)
- Oscam-Stapi integrated including a basic configuration for 2 card readers

Installation Note:
• Image (6) files via USB flash drive
• Wait! The box will boot automatically after installation 1x.
• In the menu - Settings own satellite and network configuration to adapt

addition for those who need the 2nd BL for BA-Stick: Start

• KCC3.2. Network Setting. In the Settings tab should be button "Test Connection" is already 4x OK to be reported. •
button "install 2nd Boot Loader". Positive await confirmation.
• Box shut down and the power switch off.
• If you already have an installed Barry Allen (BA) has embroidery, this plug in the USB port and boot BOX.
• In the "Barry Allen" 1x the button "BA patch" button. Done.
• When you restart your have your BA then menu.

Download (http://www.datafilehost.com/download-92b8a80b.html)

live2dmax
27-04-11, 21:10
I try this firmware but I found that box respond very,very slowly and the remote as well.Anybody with bettter results?