TvrHD functional cu CCCam+ Oscam [Archive]

gineala

05-12-10, 21:56

ca sa mearga TvrHD pe DM800 iar cccam-ul sa fie activ trebuie dezactivat DVB API in CCcam.cfg

DVB API: -1

in oscam trebuie activat DVB API, in oscam.conf trebuie adaugat

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user =
pmt_mode = 0

in CCcam.cfg trebuie adaugata o line F: pt. a lega cccam-ul de oscam

F: user pass 2 0 0 { 0:0:1 }

in oscam.server trebuie adaugata linia C:

[reader]
label = cccam1
protocol = cccam
device = 127.0.0.1,17000
account = user,pass
group = 3
caid =
cccmaxhops = 3
cccversion = 2.1.3

si gata merge si TvrHD si CCcam-ul este funtional :) , testat cu CCcam 2.1.3, oscam build #3844 si cardul de tvr local in oscam.

gabrield

15-12-10, 00:28

Scuze de nestiinta, am instalat oscam 1.0 dar nu reusesc sa gasesc oscam.conf si celelalte.
Unde ar trebui sa fie ?
E vorba de dm800

SuperSonic

15-12-10, 00:43

Le găseşti in /var/tuxbox/config .

gabrield

15-12-10, 01:23

Exact, chiara cm vroiam sa scriu ca le-am gasit acolo, multumesc pentru rapditatea cu care ai scris.
Numai ca in momentul cand am instalat oscam config de pe Gemini server s-a facut intuneric si nu a mai vrut sa mearga cu nici o combinatie cam.

gineala

15-12-10, 22:21

respecta ce am zis eu in post:

1. DVB API: -1 (adica disable la decodare in cccam, el funtioneza in continuare ca server si client)
2. enable DVB API in oscam
3. linia F: in cccam
4. adaugare linie C: in oscam
5. restart emu

si se face lumina :)

---------- Post added at 22:21 ---------- Previous post was at 22:12 ----------

cam asa trebuie sa arate fisierele, eu am pe USB TvrHD

oscam.conf

[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
fallbacktimeout = 2000
cachedelay = 150
clientdyndns = 1
nice = 0
maxlogsize = 102400
preferlocalcards = 1
saveinithistory = 1

[newcamd]
port = 15002@0500:025900,000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user =
pmt_mode = 0

[webif]
httpport = 40003
httprefresh = 30
httpallowed = 192.168.1.254
httphideidleclients = 1
httpreadonly = 0
httpsavefullcfg = 0

oscam.server

[reader]
label = tvrhd
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services =
caid = 0500&FFFF
detect = cts
mhz = 357
cardmhz = 357
ident =
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

[reader]
label = cccam
protocol = cccam
device = 127.0.0.1,17000
account = user,pass
group = 3
caid =
cccmaxhops = 3
cccversion = 2.1.3

gabrield

17-12-10, 10:14

Multumesc mult pentru ajutor.
Acum este lumina, merge perfect.
E adevarat, singur nu cred ca reuseam, dar la ce am vazut cum lucrezi, esti de departe profi.

NELOO

04-01-11, 14:55

Am incercat ce s-a scris mai sus doar ca daca pun DVB API: -1 nu mai merge cccam decat server si nu mai decodeaza nimic pe dream(nici tvr nu imi apare pe sticla dar macar nu mai apare Unsupported CAS)...acuma daca eu vreau sa folosesc si cardul de tvr1 va trebuie de fiecare data sa intru in ccam.cfg sa tai DVB API: -1 sau este vreo solutie(eventual vreun cccam.cfg brut menit sa ma ajute si un oscam.conf)...
Multumesc si scuzati nestiinta

P.S.: Nu radeti de prostie...e unicul lucru pur si invincibil pe lumea asta :)))

badeaghio

04-01-11, 15:26

1.daca pun un card TVR in dm500, poate sa "handle" ecm-uri pentru TVR hunedoara?
2.trebuie pus cardul la update la cateva luni, sau e subscriptie lifetime?
3.ce as fi putut sa scriu in loc de "handle" la punctul 1? :D

jarhead

05-01-11, 00:30

Odata cumparat cardul, trebuie anual sa suni la ei(TVR) ca sa-l reactivezi, te costa doar apelul telefonic si binenteles trebuie sa te mai duci cu antena pe 16E ;) sper ca ti-am fost de ajjutor

Diablo1

05-01-11, 01:09

Anual sa suni la ei ?
Asta nu am stiut eu nu am sunat niciodata curios

jarhead

05-01-11, 01:20

eu unul am fost nevoit sa sun la ei dupa ce cardul nu a fost folosit vreo 2 luni, deci cand l-am bagat in receptor nu a pornit, poate m-am exprimat fresit ;)

fery21

05-01-11, 02:30

ca sa mearga TvrHD pe DM800 iar cccam-ul sa fie activ trebuie dezactivat DVB API in CCcam.cfg

DVB API: -1

in oscam trebuie activat DVB API...

si gata merge si TvrHD si CCcam-ul este funtional :) , testat cu CCcam 2.1.3, oscam build #3844 si cardul de tvr local in oscam.

Nu mai vorbiti prosti.. nu merge in CCcam merge in oscam dvbapi dezactivat in CCcam inseamna ca ecm va fii plasat catre oscam CCcam ramane server pentru clieti iar oscam se transforma in emulator si cliet CCcam.

jarhead

05-01-11, 02:37

Viaccess2.6 TVR HD

[global]
pidfile = /tmp/oscam.pid
usrfile = /var/log/oscamusr.log
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 1
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0500:000000
IDENT = 025900, 025910

[monitor]
port = 988
aulow = 1
monlevel = 0

[webif]
httpport = 16002
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[reader]
label=TVRHD
protocol=internal
detect=CD
device=/dev/sci0
group=1
emmcache=1,3,2
mhz=357
cardmhz= 357
CAID=500:000000
IDENT= 025900, 025910
ReconnectTimeout= 20
DisableServerFilter= 1

[account]
user = tvr
pwd = tvr
group = 1
au = TVRHD
caid = 500:000000
ident= 025900, 025910

ombre

28-06-11, 12:31

Buna ziua,
De ceva vreme ma chinui sa imi pun in 'functiune' cartela tvrHD pe DM600 dar nu reusesc.
Am incercat cu CCcam 2.1.4/NewCS1.67. si cu CCcam 2.1.4/Oscam 0.99.4 dar fara succes.CCcamul il folosesc pe post de server iar oscamul pt cititor.
/etc/CCcam.conf

N: 127.0.0.1 25900 user parola 0102030405060708091011121314
DVB API: -1
/etc/tuxbox/config/

oscam.conf

[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cwlogdir = /var/log/oscam/cw
disablelog = 1
disableuserfile = 1
usrfileflag = 1
clienttimeout = 3000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 100
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 30000
waitforcards = 0
preferlocalcards = 1
saveinithistory = 0
readerrestartseconds = 5
readerautoloadbalance = 2
readerautoloadbalance_save = 0

[monitor]
port = 11100
nocrypt = xx.121.xxx.xxx
aulow = 120
hideclient_to = 0
monlevel = 2
appendchaninfo = 0

[newcamd]
port = 25900@0500:025900,025910,FFF720
key = 0102030405060708091011121314
allowed = 192.168.1.60-255.255.255.0,192.168.1.255-255.255.255.0
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 0
boxtype = dreambox
user = user
pmt_mode = 0
priority = 0500:025900,5910,F720

[webif]
httpport = 40003
httprefresh = 30
httpallowed = 192.168.1.254
httphideidleclients = 1
httpreadonly = 0
httpsavefullcfg = 0oscam.server

[reader]
label = tvrhd
enable = 1
protocol = internal
device = /dev/sci0
services = tvr,!protv
fallback = 1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:025900,025910,FFF720
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
lb_weight = 300
auprovid = 000500 oscam.user

[account]
user = user
pwd = parola
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 0
au = tvrhd
services = tvr,!protv
caid = 0500
betatunnel =
ident = 0500:025900,025910,FFF720
chid =
cccmaxhops = 10
cccreshare = 2
keepalive = 1
numusers = 0
penalty = 0 cartela se afla in receptor si il vede webinfo de la cccam dar nu 'lucreaza'.

card reader /dev/sci0
handled 8(1) ecms and 0(0) emms
Viaccess card
Caid 500
Cardserial xxxxx
ident fff720 - bf645e
ident 25900 - bf645e
ident 25910 - bf645e
valid from 24-2-2011 untill 28-9-2011
valid from 21-2-2011 untill 22-3-2011
valid from 8-2-2011 untill 28-9-2011
+----------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
|127.0.0.1:25900 | |newcamd | | | 0 | |

delta2k2

28-06-11, 12:51

CCcamul il folosesc pe post de server iar oscamul pt cititor.
In aceasta confuguratie nu vei avea imagine. CCcam-ul gestioneaza dar nu stie sa decodeze cardul TVR . Poti testa direct cu oscam-ul , fara CCcam

logfile = /var/log/oscam/oscam.log
Ce scrie in log-ul respectiv ?

lao

28-06-11, 12:54

Ai si fisierul oscam.dvbapi?

#
# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#

P:0500:030b00
P: :025900
I: :022F00
I: :024F00
P:1880:000000
P:1802:000000
P:1802:002111
P:0100:004106
P:0100:000000
P:0100:003311
P:0d02:00008C
.......................

ombre

28-06-11, 13:10

nu am, de fapt nici un fisier nu aveam, toate le-am cules de pe net.

EDITAT:
dupa ce am creat oscam.dvbapi deja mi-a pornit, in cateva secunde am strans 31 ecmuri.
Este drept ca pana acuma nu am pus pe tvr ci doar m-am uitat in lista de servere.

card reader /dev/sci0
handled 31(31) ecms and 0(0) emms
Viaccess card
Caid 500
Cardserial xxxx
ident fff720 - bf645e
ident 25900 - bf645e
ident 25910 - bf645e
valid from 24-2-2011 untill 28-9-2011
valid from 21-2-2011 untill 22-3-2011
valid from 8-2-2011 untill 28-9-2011

+----------------+---------------+------------+------------+-------+-----+--------+---------------------------------------------+
| Username | Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+----------------+---------------+------------+------------+-------+-----+--------+---------------------------------------------+
|test1 |192.168.1.66 |00d 00:07:54|00d 00:00:09|44 (44)|0 (0)|2.0.11 |0500:025900:0002 (ok) |

+----------------+---------------------------------------+
| Username | Shareinfo |
+----------------+---------------------------------------+
| test1|local 0500:025900 44(44) |
+----------------+---------------------------------------+

La servere nu-mi apare, de ce nu-mi apare in lista de servere?

+----------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
|127.0.0.1:25900 | |newcamd | | | 0 | |

la partajare imi apare:

|/dev/sci0 |sci | 500|viaccess |fff720,25900,25910 |0 11 | |

franta

28-06-11, 14:47

Este drept ca pana acuma nu am pus pe tvr ci doar m-am uitat in lista de servere.

cccamu nu deschide din share cardul dolce chiar daca il primesti, trebuie sa folosesti mgcam ca sa iti mearga din share

ombre

28-06-11, 15:07

nu este card dolce ci tvr http://www.elstar.ro/?page=shop/flypage&product_id=413&category_id=5812622631c82a0756b91d0c91842e8b

lao

28-06-11, 16:07

Lasa naibii cccam , vezi daca ai imagine pe tv. Si vezi ce zice in webif la oscam la reader

XXXXXB0 r 1 tvrhd ONTVRHD OFF 127.0.0.1 0 internal 24.06.11 19:44:45 03d 20:20:50 0000:0000 NO DATA 02d 00:53:23 CARDOKSi nu vede cardul din linie in cccam ca ai pus

allowed = 192.168.1.60-255.255.255.0,192.168.1.255-255.255.255.0adauga si 127.0.0.1, sau daca vrei sa mai dai si la altii pune

allowed = 0.0.0.0-255.255.255.0

franta

28-06-11, 17:02

nu este card dolce ci tvr http://www.elstar.ro/?page=shop/flyp...b91d0c91842e8b (http://www.elstar.ro/?page=shop/flypage&product_id=413&category_id=5812622631c82a0756b91d0c91842e8b)

da greseala mea , vroiam sa spun TVR HD

ombre

02-07-11, 13:20

@lao (http://sateliti.info/member.php?12582-lao)

3001F8B0 s 0 root 127.0.0.1 0 server 02.07.11 11:27:05 00:43:05 0000:0000 00:00:00 OK
3182C4F0 h 1 root 127.0.0.1 0 http 02.07.11 11:27:05 00:51:06 0000:0000 00:22:24 OK
c 1 tvr ON ON 127.0.0.1 1103 newcamd (CCcam) 02.07.11 12:31:31 00:00:28 0000:0000 00:00:28 OK

2011/07/02 12:30:48 3001F8B0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5509 (powerpc-tuxbox-linux)
2011/07/02 12:30:48 3001F8B0 s version=1.00-unstable_svn, build #5509, system=powerpc-tuxbox-linux, nice=-1
2011/07/02 12:30:48 3001F8B0 s client max. idle=120 sec, debug level=0
2011/07/02 12:30:48 3001F8B0 s max. logsize=10000 Kb, loghistorysize=4096 bytes
2011/07/02 12:30:48 3001F8B0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/02 12:30:48 3001F8B0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/07/02 12:30:48 3001F8B0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/02 12:30:48 3001F8B0 s signal handling initialized (type=sysv)
2011/07/02 12:30:48 3001F8B0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/07/02 12:30:48 3001F8B0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/07/02 12:30:48 3001F8B0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/07/02 12:30:48 3001F8B0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/07/02 12:30:48 3001F8B0 s monitor: initialized (fd=9, port=988)
2011/07/02 12:30:48 3001F8B0 s camd33: disabled
2011/07/02 12:30:48 3001F8B0 s camd35: disabled
2011/07/02 12:30:48 3001F8B0 s cs378x: disabled
2011/07/02 12:30:48 3001F8B0 s newcamd: initialized (fd=10, port=34000, crypted)
2011/07/02 12:30:48 3001F8B0 s CAID: 0500
2011/07/02 12:30:48 3001F8B0 s provid #0: 1F1F1F
2011/07/02 12:30:48 3001F8B0 s provid #1: 025910
2011/07/02 12:30:48 3001F8B0 s radegast: disabled
2011/07/02 12:30:48 3001F8B0 s http thread started
2011/07/02 12:30:48 3001F8B0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/02 12:30:48 3001F8B0 s waiting for local card init
2011/07/02 12:30:48 3182C4F0 h HTTP Server listening on port 16002
2011/07/02 12:30:48 3001F8B0 s init for all local cards done
2011/07/02 12:30:48 3001F8B0 s anti cascading disabled
2011/07/02 12:31:31 3282D4F0 c client connected to 34000 port
2011/07/02 12:31:31 3282D4F0 c encrypted newcamd:34000-client 127.0.0.1 granted (tvr, au=on (1 reader))
2011/07/02 12:31:31 3282D4F0 c user tvr authenticated successfully (CCcam)
2011/07/02 12:31:31 3282D4F0 c AU disabled for user tvr
Am reinstalat imaginea Gemini 4.70 si un nou Cccam 2.2.1 + Oscam 1.0(ambele manual ca pe Gemini server nu mai gasesc nimic).
Testele le fac pe Skystar2 cu pluginsul Hadu 0.1.2.6.

http://img718.imageshack.us/img718/3650/hadu.th.jpg (http://imageshack.us/photo/my-images/718/hadu.jpg/)

@franta deci pe cccam nu am sa deschid tvrul? dar vad ca o poate da mai departe.

delta2k2

02-07-11, 13:33

@ombre, tu citeşti ce scrie lumea pe aici ?

Mai reciteşte odata postul #15 (http://sateliti.info/showthread.php?21285-TvrHD-functional-cu-CCCam-Oscam&p=173585&viewfull=1#post173585)

lao

02-07-11, 15:34

Eu nu vad readerul tau nicaieri. Ai bagat o linie N de tvr in oscam?

c 1 tvr ON ON 127.0.0.1 1103 newcamd (CCcam) 02.07.11 12:31:31 00:00:28 0000:0000 00:00:28 OKCam asa trebuie sa se vada in webif:
http://img687.imageshack.us/img687/7083/tvrs.jpg (http://imageshack.us/photo/my-images/687/tvrs.jpg/)

http://imageshack.us/photo/my-images/842/tvrp.jpg/

alex07

23-02-13, 13:32

Va salut, mai merge combinatia CCCam+Oscam pentru TVR, deoarece nu reusesc sa-i dau de cap, am incercat setarile de aici dar nu merge.Setarile mele sunt urmatoarele:
oscam conf:
[global]
pidfile = /tmp/oscam.pid
usrfile = /var/log/oscamusr.log
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 1
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[monitor]
port = 988
nocrypt =
aulow = 1
hideclient_to = 0
monlevel = 0
appendchaninfo = 0

[newcamd]
port = 34000@0500:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
httpport = 8080
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.0
httphideidleclients = 0
httpreadonly = 0

oscam server:
[reader]
label=TVRHD
protocol=internal
detect=CD
device=/dev/sci0
group=1
emmcache=1,3,2
mhz=357
cardmhz= 357
CAID=500:000000
IDENT= 025900, 025910
ReconnectTimeout= 20
DisableServerFilter= 1

oscam user:
[account]
user =
pwd =
group = 1
au = TVRHD
caid = 500:000000
ident= 025900, 025910

cccamcfg:
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 1

Receptorul este dm800se clona.Multumesc pentru ajutor, orice sugestie este binevenita.

lao

23-02-13, 13:48

am incercat setarile de aici dar nu merge
Care setari de aici?
In postul 14 sunt setarile, ale tale sunt gresite

hotm

13-10-13, 02:09

Am un DM800 si card TVR. Am urmat setarile din postul 13. Am avut lumina, insa de ceva vreme nu imi mai decodeaza de pe card, imi decodeaza decat din linie de la CCCAM.
Am vazut in status ca nu se initializeaza SCI0, si am remarcat ca are legatura cu ora sistemului, insa ora este aiurea, iar anul 1970...daca modific manual data si ora, se initializeaza SCI0, insa tot nu citeste de pe card, imi apare ERROR (no entitlements), desi in combinatia NEWCS+Mgcamd am lumina si am subscriptie pana pe 23.10.2013.
Prima oara cand mi-a functionat era Oscam 1.20-r8241, acum folosesc 1.20 - r8972, dar tot degeaba.
Da-ti-mi vre-o idee, ce sa mai caut, ce sa mai modific...

lao

13-10-13, 08:48

Pune frecventele pe auto la card, s-a mai scris despre asta zilele astea pe forum.

http://sateliti.eu/showthread.php/27398-Dezbatere-OSCAM?p=230445&viewfull=1#post230445

Citeste mai mult, in principiu gasesti orice pe forum