The Satman
02-04-10, 18:20
Hi,
A friend asked me to have his card in my PC server. It is a NDS2 card (919). I tried first with newcs 1.67 in a smargo, but no luck. If my information is correct, there is no PC server software fix after the 17/3 changes. Only for sat-receiver software. Maybe someone can confirm this?
So I have installed it on the PC server with CCcam 2.1.3., in a smargo. But still no picture on Sky Italy. I asked my friend to send me the serial number of the box he is using. don't know if I need to put in the boxkey for a NDS2 919 card.
In CCcam web page > shares , I see the card:
|/dev/ttyUSB0 |smartreader+| 919|nds
In CCcam web page > entitlements, I see:
card reader /dev/ttyUSB0
handled 133(133) ecms and 0(0) emms
Nds card xxxxxx
Entitlement info
0c66 45-12-2008
1f14 35-01-2006
04de 51-07-2005
021b 25-05-2010
0226 25-05-2010
0228 25-05-2010
022e 25-05-2010
0295 25-05-2010
02fe 25-05-2010
The serial numbers I received from my friend are from a Amstrad DRX500I:
Cod Sky: CB123456789012 (replaced with fictive characters)
Amstrad: 0xAxxxxCxxxxxxxx (replaced with fictive characters)
I am using Dreambox Config Creator 0.8.0. The boxkey creator gives me 2 options:
Serial 9-11 characters or Serial 17 characters. From the above I count 14 characters from line 1, and 16 from line 2.
I took from the first line 23456789012 and entered this in the boxkey creator. This produced me a boxkey that was the same as the one I see when starting CCcam -d. But still no picture.
I use : SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000 # Sky ITA NDS2
Can anyone give me some advice on what is going on?
Best regards,
The Satman
A friend asked me to have his card in my PC server. It is a NDS2 card (919). I tried first with newcs 1.67 in a smargo, but no luck. If my information is correct, there is no PC server software fix after the 17/3 changes. Only for sat-receiver software. Maybe someone can confirm this?
So I have installed it on the PC server with CCcam 2.1.3., in a smargo. But still no picture on Sky Italy. I asked my friend to send me the serial number of the box he is using. don't know if I need to put in the boxkey for a NDS2 919 card.
In CCcam web page > shares , I see the card:
|/dev/ttyUSB0 |smartreader+| 919|nds
In CCcam web page > entitlements, I see:
card reader /dev/ttyUSB0
handled 133(133) ecms and 0(0) emms
Nds card xxxxxx
Entitlement info
0c66 45-12-2008
1f14 35-01-2006
04de 51-07-2005
021b 25-05-2010
0226 25-05-2010
0228 25-05-2010
022e 25-05-2010
0295 25-05-2010
02fe 25-05-2010
The serial numbers I received from my friend are from a Amstrad DRX500I:
Cod Sky: CB123456789012 (replaced with fictive characters)
Amstrad: 0xAxxxxCxxxxxxxx (replaced with fictive characters)
I am using Dreambox Config Creator 0.8.0. The boxkey creator gives me 2 options:
Serial 9-11 characters or Serial 17 characters. From the above I count 14 characters from line 1, and 16 from line 2.
I took from the first line 23456789012 and entered this in the boxkey creator. This produced me a boxkey that was the same as the one I see when starting CCcam -d. But still no picture.
I use : SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000 # Sky ITA NDS2
Can anyone give me some advice on what is going on?
Best regards,
The Satman