View Full Version : Monitoring various CCcam parameters with Munin
Monitoring various CCcam parameters with Munin
'' Munin is a network/system monitoring application that presents output in graphs through a web interface. Its emphasis is on simple plug and play capabilities. A large number of monitoring plugins are available. Using Munin you can easily monitor the performance of your computers, networks, SANs, and applications as well. It uses the RRDtool (written by Tobi Oetiker) and is written in Perl. It stores the data in RRD files, and (if needed) updates the graphs. One of the main goals has been ease of creating new plugins (graphs).
Munin is available as a package in most distros. In Ubuntu for example, to install it, just type: sudo apt-get install munin.
With the plugins below, you can very easily monitor vairous CCcam parameters along the many others inside your Munin installation on your Linux system.
If you use Ubuntu, go to /usr/share/munin/plugins/ (other distros may have some other location for this) and create there a file called cccam_cards
Paste the following text in the file, then save it:
#!/bin/sh
case $1 in
config)
cat <<'EOM'
graph_title CCcam available cards
graph_vlabel cards
graph_category CCcam
hop1.label Cards in hop1
hop2.label Cards in hop2
hop3.label Cards in hop3
hop4.label Cards in hop4
EOM
exit 0;;
esac
echo -n "hop1.value "
echo shares | nc localhost 16000 | grep "|1 " | wc -l
echo -n "hop2.value "
echo shares | nc localhost 16000 | grep "|2 " | wc -l
echo -n "hop3.value "
echo shares | nc localhost 16000 | grep "|3 " | wc -l
echo -n "hop4.value "
echo shares | nc localhost 16000 | grep "|4 " | wc -l
Paste this into a new file, cccam_servers_clients:
#!/bin/sh
case $1 in
config)
cat <<'EOM'
graph_title CCcam Servers and Clients
#graph_vlabel CCcam
graph_category CCcam
clients.label Connected clients
aclient.label Active clients
servers.label Server connections
EOM
exit 0;;
esac
echo -n "clients.value "
echo info | nc localhost 16000 | grep Connected | awk '{print $3}'
echo -n "aclient.value "
echo info | nc localhost 16000 | grep 'Active clients' | awk '{print $3}'
echo -n "servers.value "
echo servers | nc localhost 16000 | grep 'Server connections' | awk '{print $3}'
Paste this into a new file, cccam_shares_ecm:
#!/bin/sh
case $1 in
config)
cat <<'EOM'
graph_title CCcam Shares and ECM
#graph_vlabel cccam
graph_category CCcam
shares.label Available shares
ecms.label Total handled client ecms
EOM
exit 0;;
esac
echo -n "shares.value "
echo shares | nc localhost 16000 | grep Available | awk '{print $3}'
echo -n "ecms.value "
echo info | nc localhost 16000 | grep ecm | awk '{print $5}'
Make these files executable (change permissions with chmod to 755).
Create symlinks for each file to folder /etc/munin/plugins.
Restart munin: sudo service munin-node restart. Sit back and relax for 15 minutes, and look at your graphs growing.
Lots of parameters of CCcam can be monitored. Based on the code above, with simple modifications almost anything can be graphed. ''
sal
am facut ce s-a spus aici dar la sectiunea cccam nu imi arata decat cccam available cards.
ma gandesc poate configul pt cccam_servers_clients si cccam_shares_ecm
or avea ceva gesit sau poate am facut eu ceva in neregula
am facut fiserele am copiat textul dat am salvat am skimbat atribtele am dat read wirght la toti useri si am bifat sa fie executabil.
am facut shortcut unde este recomandat dar nu merge
poate poti sa ma ajuti
eu am ubuntu
mersi
am renuntat sa folosesc munin pt ca imi bloca cccamu
dar era foarte interesant
techcenter
27-03-11, 23:51
fisierul: cccam_version_servers
#!/bin/sh
# cccam_version_servers v0.51
#
# Monitoring CCcam's parameter using the WEBINFO HTTP port
#
### CONFIG - START
# List of Server versions you want to monitor, seperate by " "(<space>) (eg: "2.1.1 2.1.2")
SERVERversLIST="2.0.1 2.0.11 2.1.1 2.1.2 2.1.3 2.1.4 2.2.0 2.2.1 2.2.2"
# Get current connected or generate from above "SERVER vers LIST"? (yes/no)
USEversLIST="yes"
# /path/to/CCcam.cfg ... if your using USER/PASS ("" to disable and use below settings)
# CCcam-default: /var/etc/CCcam.cfg
CCcamCFG="/var/etc/CCcam.cfg"
# ONLY if you dont run CCcam-Server on same Box as Munin (else set above CCcamCFG)
USERNAME=""
PASSWORD=""
WEBINFOPORT=""
# IP/Host of your CCcam-Server to connect to...
CCCAMIP="localhost"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
# read CCcam.cfg and extract user/pass/port
proc_read_CCcamcfg() {
USERNAME=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
PASSWORD=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
WEBINFOPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
}
proc_get_infos() {
if [ ! -z "$CCcamCFG" ]; then
proc_read_CCcamcfg
fi
if [ -z "$WEBINFOPORT" ]; then
WEBINFOPORT="16001"
fi
if [ -z "$USERNAME" ]; then
URL="http://${CCCAMIP}:${WEBINFOPORT}"
else
URL="http://${USERNAME}:${PASSWORD}@${CCCAMIP}:${WEBINFOPORT}"
fi
}
if [ ! -z "$HOME" ]; then
TMPFILE="${HOME}/.tmpfile"
elif [ -d "/tmp" ]; then
TMPFILE="/tmp/.tmpfile"
elif [ -d "/var/tmp" ]; then
TMPFILE="/var/tmp/.tmpfile"
elif [ -d "/usr/tmp" ]; then
TMPFILE="/usr/tmp/.tmpfile"
elif [ -d "/usr/local/tmp" ]; then
TMPFILE="/usr/local/tmp/.tmpfile"
else
TMPFILE=".tmpfile"
fi
# create array SERVERvers
proc_get_server_vers() {
if [ "$USEversLIST" = "yes" ]; then
sVERSIONS=`echo $SERVERversLIST | sort`
c=1
for V in $sVERSIONS; do
SERVERvers[${c}]="$V"
c=$(($c + 1))
done
else
wget -q -O - "${URL}/servers" >$TMPFILE
sVERSIONS=`grep "|[0-9].[0-9].[0-9]" $TMPFILE | cut -d "|" -f5 | sort`
c=1
for sVER in ${sVERSIONS}; do
SVadded=""
if [ -z "$SVsetted" ]; then
SERVERvers[${c}]="$sVER" ; SVsetted=1
else
for sVER2 in ${SERVERvers }; do
if [ "$sVER2" = "$sVER" ]; then
SVadded=1
fi
done
if [ "$SVadded" != "1" ]; then
SERVERvers[${c}]="$sVER" ; SVsetted=2
fi
fi
c=$(($c + 1))
done
fi
}
proc_get_infos
if [ "$1" = "config" ]; then
proc_get_server_vers
echo 'graph_title CCcam Servers by version'
echo 'graph_category CCcam'
echo 'graph_args --lower-limit 0'
echo 'graph_scale no'
if [ ! -z "$sVERSIONS" ]; then
for SERVERver in ${SERVERvers }; do
Sver2=`echo ${SERVERver} | tr -d "."`
echo "SV${Sver2}.label ${SERVERver}"
done
fi
rm -f $TMPFILE
exit 0
fi
proc_get_server_vers
if [ "$USEversLIST" = "yes" ]; then
wget -q -O - "${URL}/servers" >$TMPFILE
fi
if [ ! -z "$sVERSIONS" ]; then
for Sver in ${SERVERvers }; do
sVc=`grep "|${Sver}" $TMPFILE | wc -l`
if [ -z "$sVc" ]; then
sVc=0
fi
Sver2=`echo ${Sver} | tr -d "."`
echo "SV${Sver2}.value ${sVc}"
done
fi
rm -f $TMPFILE
fisierul: cccam_version_clients
#!/bin/sh
# cccam_version_clients v0.51
#
# Monitoring CCcam's parameter using the WEBINFO HTTP port
#
### CONFIG - START
# List of Client versions you want to monitor, seperate by " "(<space>) (eg: "2.1.1 2.1.2")
CLIENTversLIST="2.0.1 2.0.11 2.1.1 2.1.2 2.1.3 2.1.4 2.2.0 2.2.1 2.2.2"
# Get current connected or generate from above "CLIENT vers LIST"? (yes/no)
USEversLIST="yes"
# /path/to/CCcam.cfg ... if your using USER/PASS ("" to disable and use below settings)
# CCcam-default: /var/etc/CCcam.cfg
CCcamCFG="/var/etc/CCcam.cfg"
# ONLY if you dont run CCcam-Server on same Box as Munin (else set above CCcamCFG)
USERNAME=""
PASSWORD=""
WEBINFOPORT=""
# IP/Host of your CCcam-Server to connect to...
CCCAMIP="localhost"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
# read CCcam.cfg and extract user/pass/port
proc_read_CCcamcfg() {
USERNAME=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
PASSWORD=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
WEBINFOPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
}
proc_get_infos() {
if [ ! -z "$CCcamCFG" ]; then
proc_read_CCcamcfg
fi
if [ -z "$WEBINFOPORT" ]; then
WEBINFOPORT="16001"
fi
if [ -z "$USERNAME" ]; then
URL="http://${CCCAMIP}:${WEBINFOPORT}"
else
URL="http://${USERNAME}:${PASSWORD}@${CCCAMIP}:${WEBINFOPORT}"
fi
}
if [ ! -z "$HOME" ]; then
TMPFILE="${HOME}/.tmpfile"
elif [ -d "/tmp" ]; then
TMPFILE="/tmp/.tmpfile"
elif [ -d "/var/tmp" ]; then
TMPFILE="/var/tmp/.tmpfile"
elif [ -d "/usr/tmp" ]; then
TMPFILE="/usr/tmp/.tmpfile"
elif [ -d "/usr/local/tmp" ]; then
TMPFILE="/usr/local/tmp/.tmpfile"
else
TMPFILE=".tmpfile"
fi
# create array CLIENTvers
proc_get_client_vers() {
if [ "$USEversLIST" = "yes" ]; then
cVERSIONS=`echo $CLIENTversLIST | sort`
c=1
for V in $cVERSIONS; do
CLIENTvers[${c}]="$V"
c=$(($c + 1))
done
else
wget -q -O - "${URL}/clients" >$TMPFILE
cVERSIONS=`grep "|[0-9].[0-9].[0-9]" $TMPFILE | cut -d "|" -f5 | sort`
c=1
for cVER in ${cVERSIONS}; do
CVadded=""
if [ -z "$CVsetted" ]; then
CLIENTvers[${c}]="$cVER" ; CVsetted=1
else
for cVER2 in ${CLIENTvers }; do
if [ "$cVER2" = "$cVER" ]; then
CVadded=1
fi
done
if [ "$CVadded" != "1" ]; then
CLIENTvers[${c}]="$cVER" ; CVsetted=2
fi
fi
c=$(($c + 1))
done
fi
}
proc_get_infos
if [ "$1" = "config" ]; then
proc_get_client_vers
echo 'graph_title CCcam Clients by version'
echo 'graph_category CCcam'
echo 'graph_args --lower-limit 0'
echo 'graph_scale no'
if [ ! -z "$cVERSIONS" ]; then
for CLIENTver in ${CLIENTvers }; do
Cver2=`echo ${CLIENTver} | tr -d "."`
echo "CV${Cver2}.label ${CLIENTver}"
done
fi
rm -f $TMPFILE
exit 0
fi
proc_get_client_vers
if [ "$USEversLIST" = "yes" ]; then
wget -q -O - "${URL}/clients" >$TMPFILE
fi
if [ ! -z "$cVERSIONS" ]; then
for Cver in ${CLIENTvers }; do
cVc=`grep "|${Cver}" $TMPFILE | wc -l`
if [ -z "$cVc" ]; then
cVc=0
fi
Cver2=`echo ${Cver} | tr -d "."`
echo "CV${Cver2}.value ${cVc}"
done
fi
rm -f $TMPFILE
fisierul: cccam_usercards
#!/bin/sh
# cccam_usercards v0.51
#
# Monitoring CCcam's parameter using the WEBINFO HTTP port
#
### CONFIG - START
# /path/to/CCcam.cfg ... if your using USER/PASS ("" to disable and use below settings)
# CCcam-default: /var/etc/CCcam.cfg
CCcamCFG="/var/etc/CCcam.cfg"
# ONLY if you dont run CCcam-Server on same Box as Munin (else set above CCcamCFG)
USERNAME=""
PASSWORD=""
WEBINFOPORT=""
# IP/Host of your CCcam-Server to connect to...
CCCAMIP="localhost"
# Create for each User/Peer you want to monitor, how many cards you get from him, an own array
# e.g.: USERCARDS[1]="dyndns.host"
# e.g.: USERCARDS[2]="74.125.79.99"
USERCARDS[1]="127.0.0.1"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
# read CCcam.cfg and extract user/pass/port
proc_read_CCcamcfg() {
USERNAME=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
PASSWORD=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
WEBINFOPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
}
proc_get_infos() {
if [ ! -z "$CCcamCFG" ]; then
proc_read_CCcamcfg
fi
if [ -z "$WEBINFOPORT" ]; then
WEBINFOPORT="16001"
fi
if [ -z "$USERNAME" ]; then
URL="http://${CCCAMIP}:${WEBINFOPORT}"
else
URL="http://${USERNAME}:${PASSWORD}@${CCCAMIP}:${WEBINFOPORT}"
fi
}
if [ ! -z "$HOME" ]; then
TMPFILE="${HOME}/.tmpfile"
elif [ -d "/tmp" ]; then
TMPFILE="/tmp/.tmpfile"
elif [ -d "/var/tmp" ]; then
TMPFILE="/var/tmp/.tmpfile"
elif [ -d "/usr/tmp" ]; then
TMPFILE="/usr/tmp/.tmpfile"
elif [ -d "/usr/local/tmp" ]; then
TMPFILE="/usr/local/tmp/.tmpfile"
else
TMPFILE=".tmpfile"
fi
if [ "$1" = "config" ]; then
echo 'graph_title CCcam User Cards'
echo 'graph_args --lower-limit 0'
echo 'graph_category CCcam'
echo 'graph_vlabel cards'
x=1
for UC in ${USERCARDS }; do
echo "user${x}cards.label ${x}. User Cards (${UC})"
x=$(($x + 1))
done
exit 0
fi
proc_get_infos
wget -q -O - "${URL}/servers" >$TMPFILE
x=1
for UC in ${USERCARDS }; do
RESULT=`grep ${UC} $TMPFILE | cut -d'|' -f7 | sed 's/ //g'`
if [ "$RESULT" = "remote" ]; then
RESULT=`grep ${UC} $TMPFILE | awk '{print $4}'`
fi
echo "user${x}cards.value $RESULT"
x=$(($x + 1))
done
rm -f $TMPFILE
fisierul: cccam_servers_clients
#!/bin/sh
# cccam_servers_clients v0.51
#
# Monitoring CCcam's parameter using the WEBINFO HTTP port
#
### CONFIG - START
# /path/to/CCcam.cfg ... if your using USER/PASS ("" to disable and use below settings)
# CCcam-default: /var/etc/CCcam.cfg
CCcamCFG="/var/etc/CCcam.cfg"
# ONLY if you dont run CCcam-Server on same Box as Munin (else set above CCcamCFG)
USERNAME=""
PASSWORD=""
WEBINFOPORT=""
# IP/Host of your CCcam-Server to connect to...
CCCAMIP="localhost"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
# read CCcam.cfg and extract user/pass/port
proc_read_CCcamcfg() {
USERNAME=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
PASSWORD=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
WEBINFOPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
}
proc_get_infos() {
if [ ! -z "$CCcamCFG" ]; then
proc_read_CCcamcfg
fi
if [ -z "$WEBINFOPORT" ]; then
WEBINFOPORT="16001"
fi
if [ -z "$USERNAME" ]; then
URL="http://${CCCAMIP}:${WEBINFOPORT}"
else
URL="http://${USERNAME}:${PASSWORD}@${CCCAMIP}:${WEBINFOPORT}"
fi
}
if [ ! -z "$HOME" ]; then
TMPFILE="${HOME}/.tmpfile"
elif [ -d "/tmp" ]; then
TMPFILE="/tmp/.tmpfile"
elif [ -d "/var/tmp" ]; then
TMPFILE="/var/tmp/.tmpfile"
elif [ -d "/usr/tmp" ]; then
TMPFILE="/usr/tmp/.tmpfile"
elif [ -d "/usr/local/tmp" ]; then
TMPFILE="/usr/local/tmp/.tmpfile"
else
TMPFILE=".tmpfile"
fi
if [ "$1" = "config" ]; then
echo 'graph_title CCcam Servers and Clients'
echo 'graph_category CCcam'
echo 'graph_args --lower-limit 0'
echo 'clients.label Connected Clients'
echo 'aclients.label Active Clients'
echo 'servers.label Connected Servers'
exit 0
fi
proc_get_infos
CLIENTSCONNECTED=CLIENTSACTIVE=SERVERSONLINE=0
wget -q -O - "${URL}" >$TMPFILE
CLIENTSCONNECTED=`grep Connected $TMPFILE | awk '{print $3}'`
CLIENTSACTIVE=`grep 'Active clients' $TMPFILE | awk '{print $3}'`
echo "clients.value $CLIENTSCONNECTED"
echo "aclients.value $CLIENTSACTIVE"
wget -q -O - "${URL}/servers" >$TMPFILE
SERVERSONLINE=`grep -e 'd [0-2][0-9]:[0-6][0-9]:[0-6][0-9]' $TMPFILE | wc -l`
echo "servers.value $SERVERSONLINE"
rm -f $TMPFILE
fisierul: cccam_cards
#!/bin/sh
# cccam_cards v0.51
#
# Monitoring CCcam's parameter using the WEBINFO HTTP port
#
### CONFIG - START
# /path/to/CCcam.cfg ... if your using USER/PASS ("" to disable or use below settings)
# CCcam-default: /var/etc/CCcam.cfg
CCcamCFG="/var/etc/CCcam.cfg"
# ONLY if you dont run CCcam-Server on same Box as Munin (else set above CCcamCFG)
USERNAME=""
PASSWORD=""
WEBINFOPORT=""
# IP/Host of your CCcam-Server to connect to...
CCCAMIP="localhost"
# How many Hops you share or only want to monitor?
MAXHOPS="2"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
# read CCcam.cfg and extract user/pass/port
proc_read_CCcamcfg() {
USERNAME=$(grep -i "WEBINFO USERNAME" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
PASSWORD=$(grep -i "WEBINFO PASSWORD" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
WEBINFOPORT=$(grep -i "WEBINFO LISTEN PORT" $CCcamCFG | cut -d ":" -f2 | sed -e 's/ //g' | sed -e 's/\r//g')
}
proc_get_infos() {
if [ ! -z "$CCcamCFG" ]; then
proc_read_CCcamcfg
fi
if [ -z "$WEBINFOPORT" ]; then
WEBINFOPORT="16001"
fi
if [ -z "$USERNAME" ]; then
URL="http://${CCCAMIP}:${WEBINFOPORT}"
else
URL="http://${USERNAME}:${PASSWORD}@${CCCAMIP}:${WEBINFOPORT}"
fi
}
if [ ! -z "$HOME" ]; then
TMPFILE="${HOME}/.tmpfile"
elif [ -d "/tmp" ]; then
TMPFILE="/tmp/.tmpfile"
elif [ -d "/var/tmp" ]; then
TMPFILE="/var/tmp/.tmpfile"
elif [ -d "/usr/tmp" ]; then
TMPFILE="/usr/tmp/.tmpfile"
elif [ -d "/usr/local/tmp" ]; then
TMPFILE="/usr/local/tmp/.tmpfile"
else
TMPFILE=".tmpfile"
fi
if [ "$1" = "config" ]; then
echo 'graph_title CCcam available Cards and Shares'
echo 'graph_args --lower-limit 0'
echo 'graph_scale no'
echo 'graph_category CCcam'
#echo 'graph_vlabel cards'
echo 'shares.label Total available Shares'
count=1
while [ ! $count -gt $MAXHOPS ]; do
echo "hop${count}.label Cards in hop${count}"
count=$(($count + 1))
done
exit 0
fi
proc_get_infos
wget -q -O - "${URL}/shares" >$TMPFILE
AVAILABLE=$(grep Available ${TMPFILE} | awk '{print $3}')
echo "shares.value ${AVAILABLE}"
count=1
while [ ! $count -gt $MAXHOPS ]; do
CARDS=$(cat ${TMPFILE} | cut -d'|' -f7 | cut -c1-3 | grep "${count}" | wc -l)
echo "hop${count}.value ${CARDS}"
count=$(($count + 1))
done
rm -f ${TMPFILE}
aceste fisiere trebuiesc create cu un editor de text UNIX (foarte important!!!). in fiecare din ele, editati
USERNAME=""
PASSWORD=""
WEBINFOPORT="" cu setarile din
CCcam.cfg. apoi, le transferati in
/etc/munin/plugins. modificati permisiunile pentru fiecare in parte:
chmod 755 /usr/share/munin/plugins/cccam_user. realizati legaturi simbolice pentru fiecare fisier in parte. exemplu:
ln -s /usr/share/munin/plugins/cccam_user /etc/munin/plugins/cccam_user sau copiati-le, pur si simplu in
/etc/munin/plugins/cccam_user. restartati sistemul sau serviciul si asteptati sa se stranga statisticile. accesati interfata munin
http://ip-ul.masinii.linux/munin. valabil pentru Ubuntu 10.10. pentru cei ce au probleme cu eroarea de accesare a interfetei web a munin, editati
/etc/munin/apache.conf linia
Allow from localhost 127.0.0.1/8 in
Allow from all.
succesuri! :drinks:
---------- Post added at 23:51 ---------- Previous post was at 23:38 ----------
monitorizare trafic CCcam folosind iptraf:
# Network Device on which your CCcam-Server runs on (default: eth0)
NETDEVICE="eth0"
# Directory where iptraf saves the logfiles (default: /var/log/iptraf)
IPTRAFlogdir="/var/log/iptraf"
# Display also Total Traffic? (yes/no)
WITHtotal="yes"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
if [ -z "$CCCAMPORT" ]; then
CCCAMPORT="12000"
elif [ -z "$NETDEVICE" ]; then
NETDEVICE="eth0"
elif [ -z "$IPTRAFlogdir" ]; then
IPTRAFlogdir="/var/log/iptraf"
fi
if [ "$1" = "config" ]; then
echo "graph_info This graph shows the CCcam traffic on the $NETDEVICE network interface."
echo 'graph_title CCcam Traffic'
echo 'graph_category CCcam'
echo 'graph_args --base 1024 -l 0'
echo 'graph_vlabel Bytes/sec'
if [ "$WITHtotal" = "yes" ]; then
echo 'graph_order traffictotal trafficin trafficout'
echo 'traffictotal.label Total traffic'
echo 'traffictotal.type DERIVE'
echo 'traffictotal.draw LINE1'
echo 'traffictotal.min 0'
echo 'traffictotal.cdef traffictotal,8,*'
else
echo 'graph_order trafficin trafficout'
fi
echo 'trafficin.label traffic IN'
echo 'trafficin.type DERIVE'
echo 'trafficin.draw LINE1'
echo 'trafficin.min 0'
echo 'trafficin.cdef trafficin,8,*'
echo 'trafficout.label traffic OUT'
echo 'trafficout.type DERIVE'
echo 'trafficout.draw LINE1'
echo 'trafficout.min 0'
echo 'trafficout.cdef trafficout,8,*'
exit 0
fi
LOG="$IPTRAFlogdir/tcp_udp_services-${NETDEVICE}.log"
TRAFFIC=$(grep "TCP/$CCCAMPORT" $LOG | tail -n1 | cut -f2 -d"," | cut -f2 -d" ")
TRAFFICIN=$(grep "TCP/$CCCAMPORT" $LOG | tail -n1 | cut -f4 -d"," | cut -f2 -d" ")
TRAFFICOUT=$(grep "TCP/$CCCAMPORT" $LOG | tail -n1 | cut -f6 -d"," | cut -f2 -d" ")
if [ -z "$TRAFFIC" ]; then
TRAFFIC=0
elif [ -z "$TRAFFICIN" ]; then
TRAFFICIN=0
elif [ -z "$TRAFFICOUT" ]; then
TRAFFICOUT=0
fi
if [ "$WITHtotal" = "yes" ]; then
echo "traffictotal.value ${TRAFFIC}"
fi
echo "trafficin.value ${TRAFFICIN}"
echo "trafficout.value ${TRAFFICOUT}"
techcenter
28-03-11, 13:31
monitorizarea activitatii Oscam-ului folosind iptraf si munin:
#!/bin/sh
# oscam_traffic v0.22
#
# special thanx to: cyres
#
# Monitoring LOCAL running OScam's traffic using iptraf
#
# HowTo:
# apt-get install iptraf
# run ' iptraf ' as root and go to Configure... Timers...
# change Logging interval... to your Munin-update-interval (default: 5min)
# go to Additional ports... and add your OScam-Server-Port
# Exit iptraf and start it into background:
# iptraf -s eth0 -B
# by default eth0 is the first network device of your server (check with: ifconfig)
#
### CONFIG - START
# SERVER PORT of your OScam-Server for iptraf (default: 33000)
OSCAMPORT="33000"
# Network Device on which your OScam-Server runs on (default: eth0)
NETDEVICE="eth0"
# Directory where iptraf saves the logfiles (default: /var/log/iptraf)
IPTRAFlogdir="/var/log/iptraf"
# Display also Total Traffic? (yes/no)
WITHtotal="yes"
# If we'r displaying Total Traffic should it draw the complete
# AREA or only a simple LINE1 like it does with traffic IN and OUT? (LINE1/AREA)
# (area looks better)
TOTALdraw="AREA"
### CONFIG - END
# -------------------------------------------------------------- #
# >>> >> > DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE! < << <<< #
# -------------------------------------------------------------- #
if [ "$TOTALdraw" != "AREA" ] && [ "$TOTALdraw" != "LINE1" ]; then
TOTALdraw="AREA"
fi
if [ -z "$OSCAMPORT" ]; then
OSCAMPORT="33000"
elif [ -z "$NETDEVICE" ]; then
NETDEVICE="eth0"
elif [ -z "$IPTRAFlogdir" ]; then
IPTRAFlogdir="/var/log/iptraf"
fi
if [ "$1" = "config" ]; then
echo "graph_info This graph shows the OScam traffic on the $NETDEVICE network interface."
echo 'graph_title OScam Traffic'
echo 'graph_category OScam'
echo 'graph_args --base 1024 -l 0'
echo 'graph_vlabel Bytes/sec'
if [ "$WITHtotal" = "yes" ]; then
echo 'graph_order traffictotal trafficin trafficout'
echo 'traffictotal.label Total traffic'
echo 'traffictotal.type DERIVE'
echo 'traffictotal.draw '$TOTALdraw''
echo 'traffictotal.min 0'
echo 'traffictotal.cdef traffictotal,8,*'
else
echo 'graph_order trafficin trafficout'
fi
echo 'trafficin.label traffic IN'
echo 'trafficin.type DERIVE'
echo 'trafficin.draw LINE1'
echo 'trafficin.min 0'
echo 'trafficin.cdef trafficin,8,*'
echo 'trafficout.label traffic OUT'
echo 'trafficout.type DERIVE'
echo 'trafficout.draw LINE1'
echo 'trafficout.min 0'
echo 'trafficout.cdef trafficout,8,*'
exit 0
fi
LOG="$IPTRAFlogdir/tcp_udp_services-${NETDEVICE}.log"
TRAFFIC=$(grep "TCP/$OSCAMPORT" $LOG | tail -n1 | cut -f1 -d";" | cut -f4 -d" ")
TRAFFICIN=$(grep "TCP/$OSCAMPORT" $LOG | tail -n1 | cut -f2 -d";" | cut -f4 -d" ")
TRAFFICOUT=$(grep "TCP/$OSCAMPORT" $LOG | tail -n1 | cut -f3 -d";" | cut -f4 -d" ")
if [ -z "$TRAFFIC" ]; then
TRAFFIC=0
elif [ -z "$TRAFFICIN" ]; then
TRAFFICIN=0
elif [ -z "$TRAFFICOUT" ]; then
TRAFFICOUT=0
fi
if [ "$WITHtotal" = "yes" ]; then
echo "traffictotal.value ${TRAFFIC}"
fi
echo "trafficin.value ${TRAFFICIN}"
echo "trafficout.value ${TRAFFICOUT}"
succesuri! :drinks:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.