PDA

View Full Version : Tvr hd


melcug
07-12-09, 12:48
De cateva luni am un Azbox Premium, iar mai nou am luat si o cartela pentru TVR HD pe care am introdus-o in slotul pentru Smartcard, dar canalul TVR HD de pe Eutelsat W2 este tot SCRAMBLED.

Ce trebuie sa fac ca sa pot vedea canalul TVR HD pe receptorul meu?

Multumesc anticipat.
valerica
07-12-09, 21:11
Merge cu newcs + mgcamd .
melcug
08-12-09, 10:41
Merge cu newcs + mgcamd .

In primul rand doresc sa utilizez cartela TVD HD local.
Am mgcamd, newcs nu am instalat inca (care versiune ar fi indicata).

In OpenXCas merg activate mgcamd si newcs in acelasi timp?

Poate fi activata cartela TVR HD in MultiCAS?

De ce in FW (fara plugin-uri aditionale) nu exista optiuni de setare/activare a SmartCard-ului?

Poti sa-mi trimiti un fisier de configurare pentru newcs?

... si ultima intrebare: o cartela noua TVR HD trebuie mai intai activata si daca se poate identifica in mesajele debug/log ale newcs daca aceasta este activata?

Multumesc anticipat.
valerica
08-12-09, 13:48
1)Cea din download executable pe serverul azboxworld : newcs1612.tdz
2)Da .
3)Nu .
4)Cum vrei sa setezi/activezi smart cardul fara emulator . Emulatoarele sunt varianta soft de cam-uri . Cartela bagata in card reader fara emu are acelasi efect asupra decodarii ca si introducerea ei intr-un cam hard nealimentat .
5)Da :


<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<node>/dev/scard</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>No</blockga>
<newcamd_port>20000</newcamd_port>
<autosid>no</autosid>
<carddetect>yes</carddetect>
<priority>hard</priority>
<PTShandshake>no</PTShandshake>
<mhz>357</mhz>
<boxkey></boxkey>
<rsa></rsa>
</device>
</readers>
<xmlserver>
<enabled>0</enabled>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>-1</ecm>
</cache>
<debug>
<darint39>sintoi51</darint39>
<level>internal</level>
<type>all</type>
<output>console, tcp</output>
<logfile>/tmp/newcs.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>172.16.1.1</udp_host>
<udp_port>9000</udp_port>
<udp_options></udp_options>
<tcp_port>1001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>local</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>127.0.0.1</hostname>
<port>12000</port>
<au>on</au>
</user>
</newcamd_server>
</newCSconfig>

6)Se activeaza + updateaza cu newcs + mgcamd , iar mesajele le vezi cu telnet .
s_e_n_z_o
08-12-09, 17:24
ce tr sa fac sa-mi mearga card in dreambox800 pentru tvr in hd?e vreo posibilitate mersi!:sorry:
Snow
08-12-09, 17:45
Instaleaza newcs cu mgcamd sau mbox sau gbox sau evocamd. Asta daca ai cardul. Din felul cum te-ai exprimat nu mi-am putut da seama daca ai card sau ai cccam si vrei sa vezi tvr hd.
melcug
09-12-09, 21:46
...
6)Se activeaza + updateaza cu newcs + mgcamd , iar mesajele le vezi cu telnet .

Multumesc Valerica pentru fisierul de configuratie si celor din echipa Info Satelit pentru articolul referitor la TVR HD.

Am ajuns la urmatoarele mesaje de la mgcamd in telnet:



[config] newcamd route = tvrhd:127.0.0.1:34000 server local
newcamd keep alive: 300, incoming port: 12000
[OPENXCAS_API:Thu Aug 27 13:13:53.972] openxcas_open:285 ## mgcamd
[OPENXCAS_API:Thu Aug 27 13:13:53.989] load_xcas_control:98 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x54C4D100 key_response 0x54C4D101
key(54c4d100), msgflg(448)
key(54c4d101), msgflg(448)
osdep_msq_client_connect : key_request 0x54C4D100 key_response 0x54C4D101
[mgcam] emm thread started
[mgcamd] tps update started.
[mg] loaded 72 keys from /EMU/OpenXCAS/mgcamd/tps.bin file
[newcamd] Connecting to 127.0.0.1:34000...
[newcamd] Login to 127.0.0.1:34000 as tvrhd accepted (9ms)
[newcamd] Card data from 127.0.0.1:34000 (23ms):
Userid x caid xxx providers x
Idents: xxxxxx xxxxxx xxxxxx

unde x ascund valorile reale.

Va rog sa-mi spuneti daca mesajele din telnet sunt ok (mie asa mi se par); am sunat pentru activare si mi-au spus ca odata cu schimbarea frecventei pentru tvrhd au bagat in broadcast toata baza de date.
Totusi, inca am SCRAMBLED pe TVRHD.
valerica
09-12-09, 22:18
Da , e OK . Urmeaza o asteptare mai lunga sau mai scurta cum ai noroc ; la mine a durat 4 zile , dar a facut update pana in 08.2010 .

Bafta .
boromir
15-12-09, 17:05
Salutare,
Si eu am aceeasi problema cu cardul TVR. Am sunat la ei si mi-au activat cardul dar tot Scrambled imi da. Are vreo legatura ca nu am acel tps.bin in directorul mgcamd? Daca da, de unde il pot lua?
Mersi mult.
trex_daemo
15-12-09, 19:48
Inca nici o veste cu privire la functionarea sloturilor CI in newcs ? :)
zildan
15-12-09, 19:53
Teamul NewCS si-a incheiat parada.
Vezi poate gasesti OSCAM!
costel_mcb
15-12-09, 22:52
Salutare,
Si eu am aceeasi problema cu cardul TVR. Am sunat la ei si mi-au activat cardul dar tot Scrambled imi da. Are vreo legatura ca nu am acel tps.bin in directorul mgcamd? Daca da, de unde il pot lua?
Mersi mult.

unde ai sunat??? vreau si eu nr de tel
melcug
23-12-09, 10:08
Combinatia newcs, mgcamd "lumineaza" TVR HD dupa o rescanare a satelitului.

Noile versiuni de MultiCAS pot fi utilizate ca si client newcamd. Am incercat sa ma conectez cu el la newcs si nu a mers, desi am facut DisableCardReader=1 si am configurat legatura cu newcs in Client Newcamd, local, pe 127.0.0.1. MultiCAS vede cardul si cu data de expirare, pe TVR1 si TVR2 (DisableCardReader=0).

A reusit cineva cu MultiCAS sa vada TVR HD direct sau prin newcs?
Multumesc.
valerica
23-12-09, 11:39
Merge cu newcs + multicas . Nu uita ca in menu de newcs client din multicas sa dai save/rosu , test de login (mesaj login success) si exit (connect all servers = yes) . Apoi iesi pe TV si astepti mesajul Success 1/1 ; dupa asta va merge .
melcug
29-12-09, 21:21
Combinatia NewCS ca cititor de cartela TVR si server newcamd impreuna cu MultiCAS ca si client newcamd local "lumineaza" TVR HD.

PS. Pentru cei interesati am adaugat in sectiunea AZBOX PlugIns fontul XBOX360M.ttf creat de mine pentru AZBox, derivat din XBOX360.ttf (utilizat de alti utilizatori AZBox).
Lambda
31-12-09, 17:57
Pentru posesorii de carduri TVR HD, vedeti ca TVR HD si-a modificat frecventa de emisie la inceputul lunii decembrie.
melcug
14-02-10, 21:12
Am regasit canalul TVR HD pe transponderul 11.557 v 29950, dar SCRAMBLED.

In debug, dupa ce conexiunea cu newcs prin newcamd este realizata si cardul este recunoscut, mgcamd da mesaje de genul:



[mg0] No viaccess key(s) found for id xxxxx keynr xx
[mg0] network can't decode
[mg0] pid 0xXXXX failed to decode.
[mg0] No viaccess key(s) found for id xxxxx keynr xx
[mg0] -> ECM to newcamd 127.0.0.1:34000
[mg0] newcamd route 127.0.0.1:34000 cant decode (360ms)
[mg0] network can't decode
[mg0] pid 0xXXXX failed to decode.
[mg0] No viaccess key(s) found for id xxxxx keynr xx
[mg0] network can't decode
[mg0] pid 0xXXXX failed to decode.


Newcs si mgcamd au aceeasi configuratie ca atunci cand mergea.
melcug
19-02-10, 10:59
Cartela mea era valida doar pana pe 28.12.2009.
Pe Dreambox se poate utiliza Gbox pentru actualizare, dar versiunea 2.1A disponibila pentru Azbox nu poate fi utilizata (nu merge).
Exista alta posibilitate sa actualizez cartela in receptorul meu, de exemplu prin newcs+mgcamd? Si daca da, care sunt liniile din fisierele de configuratie pe care trebuie sa le modific?

Mentionez ca pana la data specificata mai sus mi-a mers in combinatia newcs 1.6.12+mgcamd 1.33.
qwess
19-02-10, 23:12
Cartela mea era valida doar pana pe 28.12.2009.

Ce valabilitate au cartelele TVR?12 luni?
qwess
26-02-10, 09:45
se poate deschide cumva cartela TVR, prin cititorul intern cu CCcam ?
imi merge prin newcs+mgcamd, newcs+MultiCAS, oscam+mgcamd
la oscam+CCcam2.1.4 prin newcamd, oscam face updare dar cccam-ul nu recunoaste cartela.
Nu am setat bine CCcam, sau nu stie sa citeasca prin card reader intern?
zmeura
26-02-10, 10:25
Cccam nu deschide TVR.
qwess
26-02-10, 10:57
merci @zmeura,
vad ca merge si combinatia oscam+MultiCAS
oscam+CCcam2.1.4
asta imi da in telnet,

>> OSCam << cardserver started version 0.99.4svn, build #1211 (mipsel-azbox-linux-uclibc)
2010/02/26 8:09:35 1283 s AZBOX internal card reader by http://www.satdream.ru/forum/
2010/02/26 8:09:35 1283 s AZBOX project maintainer at Germany by http://www.pristavka.de
2010/02/26 8:09:35 1283 s
2010/02/26 8:09:35 1283 s Open OpenXCAS interface
[OPENXCAS_API:Fri Feb 26 08:09:35.517] load_xcas_control:68 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x51ABA284 key_response 0x51ABA285
key(51aba284), msgflg(448)
key(51aba285), msgflg(448)
osdep_msq_client_connect : key_request 0x51ABA284 key_response 0x51ABA285
2010/02/26 8:09:36 1283 s auth size=4740
2010/02/26 8:09:36 1283 s services reloaded: 0 services freed, 2 services loaded
2010/02/26 8:09:36 1283 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired
2010/02/26 8:09:36 1283 s signal handling initialized (type=sysv)
2010/02/26 8:09:36 1283 s 2276 service-id's loaded
2010/02/26 8:09:36 1283 s 1 lengths for caid guessing loaded
2010/02/26 8:09:36 1283 s monitor: initialized (fd=6, port=988)
2010/02/26 8:09:36 1283 s camd 3.3x: disabled
2010/02/26 8:09:36 1283 s camd 3.5x: disabled
2010/02/26 8:09:36 1283 s cs378x: disabled
2010/02/26 8:09:36 1283 s newcamd: initialized (fd=7, port=34000, crypted)
2010/02/26 8:09:36 1283 s CAID: 0500
2010/02/26 8:09:36 1283 s provid #0: FFF720
2010/02/26 8:09:36 1283 s provid #1: 025900
2010/02/26 8:09:36 1283 s provid #2: 025910
2010/02/26 8:09:36 1283 s provid #3: 000000
2010/02/26 8:09:36 1283 s radegast: disabled
2010/02/26 8:09:36 1283 s resolver thread started
2010/02/26 8:09:36 1283 s logger started (pid=1288)
2010/02/26 8:09:36 1283 s resolver started (pid=1289, delay=30 sec)
2010/02/26 8:09:36 1283 s reader started (pid=1290, device=/dev/scard)
2010/02/26 8:09:36 1283 s Waiting for local card init ....
2010/02/26 8:09:36 1290 r02 OpenXCAS open /dev/scard0
2010/02/26 8:09:36 1290 r02 card detected
2010/02/26 8:09:41 1290 r02 ATR: 3F 77 18 00 00 C2 14 00 C1 68 90 00
2010/02/26 8:09:42 1290 r02 type: viaccess(standard atr), caid: 0500, serial: 3211025502
2010/02/26 8:09:43 1290 r02 providers: 3 (FFF720,025900,025910)
2010/02/26 8:09:43 1290 r02 ready for requests
2010/02/26 8:09:43 1290 r02 card detected
2010/02/26 8:09:43 1290 r02 serial: 321........
2010/02/26 8:09:44 1290 r02 provider: 1, id: FFF720, name: TVR, sa: BF645C5E, geo: empty
2010/02/26 8:09:45 1290 r02 provider: 2, id: 025900, name: TVR 1, sa: BF645C5E, geo: FF FF FF FF
2010/02/26 8:09:45 1290 r02 class: FF, expiry date: 2010/02/18 - 2010/03/19
2010/02/26 8:09:45 1290 r02 provider: 3, id: 025910, name: TVR 2, sa: BF645C5E, geo: FF FF FF FF
2010/02/26 8:09:45 1283 s Init for all local cards done !
2010/02/26 8:09:45 1283 s anti cascading disabled
2010/02/26 8:09:45 1283 s serial: initialized (pid=1291, auto@/dev/ttyS0)
2010/02/26 8:09:45 1283 s client(2) connect from 127.0.0.1 (pid=1292, pipfd=16)
2010/02/26 8:09:45 1292 c02 encrypted newcamd:34000-client 127.0.0.1 granted (qwess, au=tvrhd)
2010/02/26 8:09:45 1292 c02 user qwess authenticated successfully (using client 4343)
2010/02/26 8:09:45 1292 c02 AU flag 0 for user qwess
asta nu zice CCcam:

+------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+------------------------------+------------+---------+--------+----------------+-------+-------------------------------+
|127.0.0.1:34000 |00d 00:01:18|newcamd | | | 1 | :oops:




+----+----------+------------------------------------+--------+
|Caid| Provider | Provider Name | System |
+----+----------+------------------------------------+--------+
| 500| fff720|[Viaccess] Issuer TVR Cultural (Old)|viaccess|
| 500| 25900|[Viaccess] TVR (16E) |viaccess|
| 500| 25910|[Viaccess] TVR(ID.Unused) |viaccess|
| 500| |[Viaccess] Viaccess CAid |viaccess|
+----+----------+------------------------------------+--------+
P.S. interesanta ultima versiune de MultiCAS cu cccam client+newcamd=1
melcug
26-02-10, 12:17
imi merge prin newcs+mgcamd, newcs+MultiCAS, oscam+mgcamd
la oscam+CCcam2.1.4 prin newcamd, oscam face updare dar cccam-ul nu recunoaste cartela.
Nu am setat bine CCcam, sau nu stie sa citeasca prin card reader intern?

Oscam face update la perioada de valabilitate si/sau la keys pentru cartela TVR HD?

Un fisier oscam.conf ar fi de ajutor pentru cei neinitiati. In plus, care ar fi versiunea recomandata?

Multumesc anticipat.
qwess
26-02-10, 17:23
Inca nu stiu daca face update la perioada de valabilitate, cred ca da...
atasez un link cu oscam_0.99.4_1211svn, configurat pentru cartela TVR,reader intern.

protocol = internal
device = /dev/scardcopy: /EMU/OpenXCAS/oscam[chmod755]--
pentru mgcamd/MultiCAS:

N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14de vazut oscam(*.conf; *.user; *.server)
DOWNLOAD (http://www.fileshare.ro/3388505235.38)
melcug
27-02-10, 16:13
Inca nu stiu daca face update la perioada de valabilitate, cred ca da...


Am incarcat modulul de la qwess, este recunsocuta cartela, dar perioada de valabilitate este tot pana la sf. lui 2009.
Dintr-o discutie cu cei de la TVR am inteles ca este incarcata toata baza de date cu valabilitate pana pe la sf. lui august 2010. Daca eu nu am mai intrat din 2009 pe TVR HD, este posibil sa fie dezactivata cartela mea?

Poate confirma cineva ca oscam face update si la perioada de valabilitate?

Multumesc anticipat.
le099
27-02-10, 17:48
Eu cred ca le puteti face cauza. Atata timp cat exista o perioada de acitivitate, aceasta trebuie sa fie activa. Deci, ei prin anumite mijloace incearca sa elimine din punct de vedere al consumatorului anumite drepturi pe deplin platite. In acelasi timp ei sunt obligati sa dea drumul transmisiei si in cazul riceiverelor alternative, asta in caz ca ei pun la dispozitie unul legitim.

Deci, facetzi voi.................
qwess
24-03-10, 12:03
si la mine a expirat perioada de valabilitate(19.03), si de atunci intuneric.
cumparat de.....o luna:clap:
dupa ce l-am cumparat s-a activat cam in 5 min.

nu mai vrea nici prin newcs nici prin oscam.

2010/03/24 9:42:14 1210 r02 provider: 1, id: FFF720, name: TVR, sa: BF645C5E, geo: empty
2010/03/24 9:42:14 1210 r02 provider: 2, id: 025900, name: TVR 1, sa: BF645C5E, geo: FF FF FF FF
2010/03/24 9:42:15 1210 r02 class: FF, expiry date: 2010/02/18 - 2010/03/19
2010/03/24 9:42:15 1210 r02 provider: 3, id: 025910, name: TVR 2, sa: BF645C5E, geo: FF FF FF FF
2010/03/24 9:42:16 1203 s Init for all local cards done !
2010/03/24 9:42:16 1203 s anti cascading disabled
2010/03/24 9:42:16 1203 s client(1) connect from 127.0.0.1 (pid=1211, pipfd=16)
2010/03/24 9:42:16 1211 c01 encrypted newcamd:34000-client 127.0.0.1 granted (qwess, au=tvr)
2010/03/24 9:42:16 1211 c01 user qwess authenticated successfully (using client 6D67)
2010/03/24 9:42:16 1211 c01 AU flag 0 for user qwess
2010/03/24 9:42:16 1211 c01 qwess (0500&025900/000F/6B:F7EA): not found (6 ms)
2010/03/24 9:42:18 1211 c01 qwess (0500&025900/000F/6B:F7EA): not found (7 ms)
2010/03/24 9:42:20 1211 c01 qwess (0500&025900/000F/6B:F7EB): not found (6 ms)


o solutie ceva?
Diablo1
24-03-10, 15:12
Bagal intr-un modul cam face sigur

Viaccess card
Caid 500
Cardserial bf645a
ident fff720 - bf645a
ident 25900 - bf645a
ident 25910 - bf645a
valid from 1-3-2010 untill 31-3-2010
valid from 1-1-2010 untill 31-1-2010
valid from 5-12-2009 untill 26-8-2010
valid from 1-12-2009 untill 31-12-2009
valid from 3-11-2009 untill 26-8-2010
valid from 5-10-2009 untill 26-8-2010
valid from 16-7-2009 untill 14-8-2009
qwess
25-03-10, 08:46
Bagal intr-un modul cam face sigur


multumesc
cred ca e singura solutie,xml-ul cred ca este bine configurat, in ultima instanta am si telefonat la ei pentru reactivare(0213199112 /405), nimic...nu isi face update.
printr-un module via se modifica frecventa in newcs/oscam, este setat in 357MHz?
Diablo1
25-03-10, 08:53
Nu are treaba cu MHz daca ai camul bagi cartela si in nici 2 minute se lumineaza Tv
Eu il bag in Dm 8000 si nu mai am dureri de cap :)
ovi_jer
25-03-10, 09:10
Eu il folosesc in Dm800 Cu Mgcamd1.313/NewsCS 1.67 si merge foarte bine.
Viaccess card
Caid 500
Cardserial bf645a
ident fff720 - bf645a
ident 25900 - bf645a
ident 25910 - bf645a
valid from 1-3-2010 untill 31-3-2010
valid from 29-1-2010 untill 26-8-2010
valid from 1-1-2010 untill 31-1-2010
valid from 15-12-2009 untill 26-8-2010
valid from 5-12-2009 untill 26-8-2010
valid from 1-12-2009 untill 31-12-2009
valid from 3-11-2009 untill 26-8-2010
valid from 1-11-2009 untill 30-11-2009
valid from 5-10-2009 untill 26-8-2010
valid from 1-10-2009 untill 31-10-2009
valid from 29-9-2009 untill 28-10-2009
valid from 25-9-2009 untill 26-8-2010
valid from 1-9-2009 untill 30-9-2009

Cine incearca combinatia Mgcamd1.313/NewsCS 1.67 sa verifice daca un usr/keys are fisierele ignore.list , mg_cfg ,newcamd.list si priority.list altfel nu merge.
lica
25-03-10, 14:41
salut nu stiti de ce o scazut asa de mult fregventa la tvr hd inainte imi intra 68 la suta cu antena de 1 m si acuma imi piseleaza nu intra nici 50
nu stiu ce sa mai fac stau in spania stiti daca o sa scimbe iara fregventa pe care a avuto sau nu
multumesc pentru raspuns
qwess
28-03-10, 12:24
Nu vrea nici cu modul viaccess :!: :!: :!: aceeasi perioada, <19.03.
Am sunat si la dep.tehnic si se pare ca sunt ceva probleme, ii sun luni iar.

@Snow tu ai reusit?
Voi cu ce mai faceti update la cartela de tvr? La mine nu mai vrea.
Snow
28-03-10, 12:30
La mine am mers cu mgcamd+newcs dupa ce-am vorbit la ei si am cerut o reactivare.
melcug
29-03-10, 12:16
La mine am mers cu mgcamd+newcs dupa ce-am vorbit la ei si am cerut o reactivare.

Ne poti spune ce versiuni utilizezi pentru mgcamd si newcs?
Dupa ce ai sunat pentru reactivare, dupa cat timp s-a luminat? http://www.sateliti.info/images/smilies/TV.gif

Multumesc anticipat.

PS. Un fisier de configuratie ar fi de ajutor pentru noi ceilalti.
michael86
29-03-10, 12:49
Uite o combinatie in care merge la mine , s-a activat prima data acum 3 luni si de atunci nu am treaba cu el !
www.easysurf.ro/fk95zwlxxcls/Newcs_mgcamd-_cardtvrhd.rar.html
download din adons mgcamd 1.35a si newcs 1.67 si inlocui-ti doar fisierele de mai sus !
ps: pentru E2
melcug
30-03-10, 07:54
ps: pentru E2

Mai avem de asteptat un fw cu E2 (sau macar modulul TV) pe AZBox, asa ca ar fi de ajutor o configuratie pentru versiunea actuala de fw.
ronniee
03-04-10, 00:38
am luat un cam viaccess pentru cartela tvr, dar nu deschide TVRHD

mentionez ca acum 3-4 luni mi-a mers cu newcs+mgcamd, poate s-a blocat intre timp?
trebuie sa sun la tvr pentru activare?
in common interface, recunoaste cartela, dar la "subscription information" nu apare valid until....

eventual unde sa setez prioritatea de citire de pe cam, ca s-ar putea sa caute cheile prin cccam

mersi
ron
qwess
03-04-10, 01:10
suna pentru activare poate ai noroc.
la mine de cand a expirat nu isi mai face activarea, nici cu newcs/oscam+mgcamd nici prin CI(modul viaccess), iar pe debian via smargo la fel.
tind sa cred ca se intampla ceva la acesarea bazei de date de la ei, nu mai vrea prin nici un fel de reader si nici prin modul viaccess.
Apropo e cineva care a facut re/activare recenta la card, in ultimile 3 saptamani?
qwess
07-04-10, 03:25
In sfarsit si-a reluat activitatea!!!!

valid from 27-3-2010 untill 26-8-2010
valid from 18-2-2010 untill 19-3-2010 ,
merge perfect "momentan" si prin combinatia:

in azbox prin cititor intern:
newcs--Nline(fara terminatie 256)--cccam 2.1.4(server/client)--Cline--MultiCAS(HOP1)
:!:in combinatia newcs+cccam+multicas/simultan:multicas se conecteaza la cccam doar prin terminal.(telnet) ...cazul meu
newcs--mgcamd ramane doar pentru prelungire valabilitate.

in Debian (PC)prin Smargo:
doar CCcam.x86 2.1.4(recunoaste direct cardul-/dev/ttyUSB0)->-Cline->-MultiCAS(HOP0)
qwess
07-04-10, 11:09
Configurat pentru TVR



MultiCAS 1.62D-A03
CCcam 2.1.4
Newcs 1.6.13(Reader intern)
#MgCamd 1.34d(ptr.actualizare card)


Chmod 755/ all
in meniu AzBox:MultiCAS-Splitter & CS/Client CCcam-load & save
Reboot Azbox
in cazul in care MultiCAS nu se conecteaza la CCcam:
telnet:/EMU/OpenXCAS/MultiCAS/emu_module

Download (http://www.fileshare.ro/4259201971.52)
promes
02-06-10, 19:10
am un card de la satmedia (tVR HD)si nu reusesc in azbox hd premium sa il activez .Un ajutor mi-ar fi de folos
melcug
08-06-10, 23:06
Am incarcat newcs 1.6.13 si mgcamd 1.34d de la qwess, am setat pe TVR1 pe 16E, am sunat la dep. tehnic de la TVR, le-am transmis seria, dar cartela nu se activeaza.

De la mgcamd primesc mesaje de genul:



[mg0] -> ECM to newcamd 127.0.0.1:20000
[ 19:54:42 ] [ Newcamd:20000 ] Command 80 from mgcamd len 107
[ 19:54:42 ] [ Newcamd:20000 ] ECM <- mgcamd len 107
[ 19:54:42 ] [ SID ] Checking for SID 0001 for Reader 0 (upper) - SO is: 0
[ 19:54:42 ] [ Newcamd:20000 ] Accepted SID 0001 on Reader 0 (upper) from mgcamd
[ 19:54:42 ] [ Card queue /dev/scard ] ECM added, sid 1, prio 2
[ 19:54:42 ] [ Card queue /dev/scard ] Ecm run, sid 1, prio 2, queue len: 1, max len: 1
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] Viaccess ecm: xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] [ Viaccess ] provider 025900
[ 19:54:42 ] [ Viaccess ] Sending to Card: CA88000862
[ 19:54:42 ] [ azbox ] Delay is 8us
[ 19:54:42 ] write: CA 88 00 08 62
[ 19:54:42 ] [ azbox ] Timeout is 1000308us
[ 19:54:42 ] read: 88
[ 19:54:42 ] [ azbox ] Delay is 8us
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
[ 19:54:42 ] write: xx xx
[ 19:54:42 ] [ azbox ] Timeout is 1000308us
[ 19:54:42 ] read: 90 08
[ 19:54:42 ] [ Viaccess ] Status Word from Card: 9008
[ 19:54:42 ] [ 0500 ] Card ECM took: 0s 288729us
[ 19:54:42 ] [ Newcamd ] ECM -> mgcamd (NOT OK)
[ 19:54:42 ] [ SID ] Updating SID 0001 for Reader 0 (upper) bad - SO is: 0
[ 19:54:42 ] [ ECM Cache ] Adding dynamic Cache entry at 4
[ 19:54:42 ] [ ECM Cache ] Hits 158 Total 191
[mg0] newcamd route 127.0.0.1:20000 cant decode (300ms)

dar parca si ceva de genul EMM cache din cand in cand.

Cat timp pot incerca activarea cartelei dupa ce le-am transmis seria?
Aveti o configuratie dedicata activarii, functionala, pe care sa o impartasiti comunitatii de posesori de receptoare AZBox ... fara E2?

Multumesc anticipat.
qwess
09-06-10, 09:52
incearca si acest config: modifica parametri "user")
<?xml version="1.0"?>

<newCSconfig>
<readers name="AZBOX">
<!-- <device>
<name>Phoenix</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey></boxkey>
<PTShandshake>Yes</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode></pincode>
<priority>round</priority>
</device> -->
<!-- <device>
<name>Smargo</name>
<type>smartreader+</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>yes</blockC0>
<boxkey></boxkey>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<sid>
<allow>
<id></id>
<id></id>
<id></id>
<id></id>
</allow>
<deny>
</deny>
</sid>
<Seca-PPV>No</Seca-PPV>
<pincode></pincode>
<priority>round</priority>
</device> -->
<device>
<name>upper</name>
<type>azbox</type>
<mhz>357</mhz>
<node>/dev/scard</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>yes</blockC0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<sid>
<allow>
<id>0001</id>
<id>0002</id>
<id>000f</id>
</allow>
<deny>
</deny>
</sid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode> # TVRCARD_VIA2.6
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server><!-- http://ip.azbox:8080 -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<darint39>sintoi51</darint39>
<level>normal</level>
<type>all</type>
<output>console,tcp</output>
<logfile>/DATA/hdb1/download/newcs.txt</logfile>
<console_options>normal,init</console_options>
<file_options>init,ecm</file_options>
<udp_host></udp_host>
<udp_port>9001</udp_port>
<udp_options>normal,init</udp_options>
<tcp_host></tcp_host>
<tcp_port>1001</tcp_port>
<tcp_password>azerty</tcp_password>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><!-- newcamd.list(mgcamd) CWS = 127.0.0.1 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS_INCOMING_PORT = 12000 -->
<status>access</status>
<name>mgcamd</name>
<password>mgcamd</password>
<hostname>127.0.0.1</hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel>1</cardlevel>
</user>
<user><!-- newcamd.cfg(multicas) N: 127.0.0.1 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14
editeaza .\EMU\PLUGINS\MultiCAS\splitterdata.txt: CCCAM_NEWCAMD_WORK_TOGETHER = 1 -->
<status>access</status>
<name>multicas</name>
<password>multicas</password>
<hostname>127.0.0.1</hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<sidoverride>off</sidoverride>
<allow>upper</allow>
<rate>2</rate>
<cardlevel>1</cardlevel>
</user>
<user><!-- N: "IP_azbox" 34000 mgcamd mgcamd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #TVR 16°E -->
<status>access</status>
<name>cccam</name>
<password>cccam</password>
<hostname>enteryourcccamIP</hostname>
<port>34000</port>
<au>on</au>
<spider>No</spider>
<sidoverride>on</sidoverride>
<allow>upper</allow>
<rate>2</rate>
<cardlevel>1</cardlevel>
</user> -->
<!-- <user>
<status>access</status>
<name></name>
<password></password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<sidoverride>on</sidoverride>
<allow>upper</allow>
<rate>2</rate>
</user> -->
<!-- <user>
<status>access</status>
<name></name>
<password></password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<sidoverride>on</sidoverride>
<allow>upper</allow>
<rate>2</rate>
</user> -->
<!--user>
<status>access</status>
<name></name>
<password></password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<sidoverride>on</sidoverride>
<allow>Upper</allow>
<rate>2</rate>
</user> -->
<!--user>
<name></name>
<password></password>
<hostname></hostname>
<port></port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>yes</spider>
<rate>0</rate>
<allow>upper</allow>
</user> -->
</newcamdserver>
<!-- <chameleon2>
<server>
<port>1234</port>
<enabled>yes</enabled>
<realm>myShares.AZ</realm>
</server>
<peer>
<hostname>192.168.2.5</hostname>
<port>2345</port>
<name>topex</name>
<password>topex</password>
<realm>myShares.Tp</realm>
</peer>
<user>
<name>azbox</name>
<password>azbox</password>
<realm>myShares.AZ</realm>
</user>
<virtualcards>
<builtin>no</builtin>
<vc>
<caid>0000</caid>
<provider>0000000</provider>
</vc>
<dvc>
<caid>0001</caid>
<provider>0000000</provider>
</dvc>
</virtualcards>
</chameleon2> -->
</newCSconfig>killall newcs
killall mgcamd
start 2 sesiuni telnet:

in sesiune1:
/EMU/OpenXCAS/newcs/newcs

in sesiune2:
/EMU/OpenXCAS/mgcamd/mgcamd

joacate la parity mode cu : "even" "odd" "none" , dupa modificari omori/pornesti procesele din nou.
sterge canalele/rescaneaza TP cu frecventele TVR(omite daca sunt actualizate)
-vezi log newcs
baFTA
melcug
09-06-10, 20:02
Desi numai aveam nici o speranta, de dimineata, inainte sa plec cu treaba, am pornit AZBox-ul si l-am setat pe TVR1. Pana acum doua minute (19:52) ramasese pe TVR1, l-am resetat si apoi l-am pus pe TVR HD fara speranta ca se va reactiva cartela. Mentionez ca nu am facut nici o modificare de soft sau de configuratie fata de cele din ziua trecuta.
Si ... minune (m-am si speriat cand am auzit sunetul de la TV deoarece era cam liniste in casa). S-a luminat. :clap:

Inca nu am intrat in el (telnet) sa vad pana cand este facuta activarea. Sunt prea bucuros. Trebuie sa fac loc pentru bere in frigider pentru ca mai sunt doua zile pana la inceperea Campionatelor Mondiale din Africa de Sud.

Salutare si la mai mare!

PS. Imi pierdusem speranta sa mai vad ceva de la CM in HD pentru ca magarii de la RDS au codat programele HD pe DVB-C cu doar cateva zile mai devreme ... tactica de marketing sa mai vanda si ei "jdemii" de decodoare inainte de 11 iunie.
crisz
10-06-10, 10:32
Salutare, ma bag si eu in seama :wellcome:

Sa inteleg ca merge fara modificari configuratia lui qwess :

NewCS/CCcam/MultiCAS
Configurat pentru TVR

MultiCAS 1.62D-A03
CCcam 2.1.4
Newcs 1.6.13(Reader intern)
#MgCamd 1.34d(ptr.actualizare card)

Chmod 755/ all
in meniu AzBox:MultiCAS-Splitter & CS/Client CCcam-load & save
Reboot Azbox
in cazul in care MultiCAS nu se conecteaza la CCcam:
telnet:/EMU/OpenXCAS/MultiCAS/emu_module


Nu de alta dar am si eu aceeasi problema AZbox Hd si card TVR neactivat pina acum :agresiv:

Numai bine
melcug
10-06-10, 14:57
Din arhiva trimisa de quess te intereseaza doar newcs si mgcamd din directorul OpenXCAS. Dupa copiere, editezi module.seq in care singurele module fara # sa fie newcs si mgcamd, chmod 755 pe executabilele newcs si mgcamd si apoi restart. Manipularea fisierelor o poti face cu MaZ 3.0.

Dai telefon (http://www.elstar.ro/?page=shop/flypage&product_id=413) la dep. tehnic de la TVR si ceri reactivarea cartelei si le transmiti seria.

Seteaza pe TVR1, dar poti si pe TVR HD la 16E - asa a mers la mine (rescaneaza TP de la 11557 V, 29950, 3/4).

Salutare si succes!

PS. La mine activarea este pana pe 26.08.2010.
crisz
10-06-10, 18:12
Merci de raspuns melcug.
Sa inteleg ca pot folosi in continuare ultima versiune de Multicas , transferul fisierelor l-am facut cu FileZilla dar e ok si cu Maz 3.0.


Cam zgarciti cu activarea !!! ( PS. La mine activarea este pana pe 26.08.2010.)
:drinks:

Bafta
qwess
10-06-10, 21:22
.....

Sa inteleg ca merge fara modificari configuratia lui qwess :

NewCS/CCcam/MultiCAS
Configurat pentru TVR
.....

Modifici atributele dupa copiere, schimbi "emu_module"(il faci exec cu 755)cu cel de la ultima versiune de multicas, editezi/actualizezi "openxcas.conf":

[module]
name = MultiCAS
daemon = emu_module
version = 1.62D-B11
INFO = /tmp/ccc_ecm.info
REFRESH = 2activezi pluginurile dupa cum vrei.
pentru activare incepi cu mgcamd+newcs
dupa activarea card. activezi multicas-dez.mgcamd
sau poti rula multicas+ccc+newcs
--sunt deja cofigurate--
actualizezi .xml:

<?xml version="1.0"?>
<!-- config pentru newcs 1.6.13 -- cititor intern AzboxHD
mgcamd+newcs; multicas+newcs; cccam+newcs(hop1); multicas+multicas+newcs -->
<newCSconfig>
<readers name="AZBOX">
<device>
<name>upper</name>
<type>azbox</type>
<mhz>357</mhz>
<node>/dev/scard</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>yes</blockC0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>Yes</autosid>
<sid>
<allow>
<id>0001</id>
<id>0002</id>
<id>000f</id>
</allow>
<deny>
</deny>
</sid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode> # TVRCARD_VIA2.6
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server><!-- http://ip.azbox:8080 -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<darint39>sintoi51</darint39>
<level>normal</level>
<type>all</type>
<output>console,tcp</output>
<logfile>/DATA/hdb1/download/newcs.txt</logfile>
<console_options>normal,init</console_options>
<file_options>init,ecm</file_options>
<udp_host></udp_host>
<udp_port>9001</udp_port>
<udp_options>normal,init</udp_options>
<tcp_host></tcp_host>
<tcp_port>1001</tcp_port>
<tcp_password>azerty</tcp_password>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<status>access</status>
<name>mgcamd</name>
<password>mgcamd</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
<user>
<status>access</status>
<name>multicas</name>
<password>multicas</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
<user>
<status>access</status>
<name>cccam</name>
<password>cccam</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
</newcamdserver>
</newCSconfig>pentru smargo folosesti configul din postul #44(+ modificarile de rigoare) cu newcs 1.67.
crisz
11-06-10, 12:04
Multumesc qwess

Sper sa am noroc sa nu mai fie probleme .
:)

Si o veste foarte buna !!!! am sunat la TVR si au spus ca incepand de azi actualizeaza toate cardurile.
Receptorul trebuie sa fie setat pe TVR 1.

Numai bine

---------- Post added at 12:04 ---------- Previous post was at 10:30 ----------

:band:

Gata, merge multumita lui qwess si melcug :clap:


Dar acum am alta problema ... daca activez MULTICAS se face intuneric :cesored:


:pls: cineva o idee .. ceva


:thx:
qwess
12-06-10, 00:15
1.Verfica daca linia N: din multicas(newcamd.cfg) este buna.
2.
.\EMU\OpenXCAS\MultiCAS\splitterdata.txt:
CCCAM_NEWCAMD_WORK_TOGETHER = 1

.\EMU\OpenXCAS\MultiCAS\cardreader.cfg:
Disable_CardReader = 1

3.in meniu azbox, incarca setarile
...../smartcard splitter.../newcamd client:[configuration load] [save] [exit] [ok]
crisz
12-06-10, 12:48
Merci,

Asa o sa fac, se bloca de obicei cand ma duceam pe gigel si ma intorceam inapoi pe TVR1
uxel
24-06-10, 14:41
Salutare! Folosesc mgcamd+newcs, sau mai bine foloseam, caci dupa prima valabilitate, nu mai pot sa o reactivez. Am sunal la ei de 4 ori, dar nimic. Am modificat openxcas.conf( adaugat ccc-ecm.info, refresh=2), newcs.xml, cardreader.cfg( disable_cardreader=1), splitterdata.txt( cccam_newcamd_work_together=1), linia N din newcamd.cfg, adaugat - ignorelist, mg-cfg, newcamd.list si priority.list. Nu mai merge. Unde gresesc?
ps - ce comanda folosesc pentru a vedea valabiliatea cartelei viaccess( in meniu pe azbox nu-mi mai apare)?
pacala68
25-06-10, 13:56
in newcs.xml ai sau adaugi un tag de tipul
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>user</name>
<password>pass</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
in browser tastezi : IP_box:8080 si ai interfata newcs ( daca ruleaza :p pe boxul cu IP_box )

sau telnet
<debug>
<password>password</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

eu am facut AU cu NewCS+Mgcamd acum o luna ( IpBox 910 :p )
Novato
28-06-10, 11:49
Salut. am si eu aceeasi problema, ma chinui sa reactivez cartela locala de tvr, fara succes deocamdata. Mi-a mers la inceput cu mgcamd&newcs.
Configuratia mea in newcs.xml e urmatoarea:
==========================================
<?xml version="1.0"?>
<!-- config pentru newcs 1.6.13 -- cititor intern AzboxHD
mgcamd+newcs; multicas+newcs; cccam+newcs(hop1); multicas+multicas+newcs -->
<newCSconfig>
<readers name="AZBOX">
<device>
<name>upper</name>
<type>azbox</type>
<mhz>357</mhz>
<node>/dev/scard</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>yes</blockC0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>Yes</autosid>
<sid>
<allow>
<id>0001</id>
<id>0002</id>
<id>000f</id>
</allow>
<deny>
</deny>
</sid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode> # TVRCARD_VIA2.6
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server><!-- http://ip.azbox:8080 -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<darint39>sintoi51</darint39>
<level>normal</level>
<type>all</type>
<output>console,tcp</output>
<logfile>/DATA/hdb1/download/newcs.txt</logfile>
<console_options>normal,init</console_options>
<file_options>init,ecm</file_options>
<udp_host></udp_host>
<udp_port>9001</udp_port>
<udp_options>normal,init</udp_options>
<tcp_host></tcp_host>
<tcp_port>1001</tcp_port>
<tcp_password>azerty</tcp_password>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<status>access</status>
<name>mgcamd</name>
<password>mgcamd</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
<user>
<status>access</status>
<name>multicas</name>
<password>multicas</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
<user>
<status>access</status>
<name>cccam</name>
<password>cccam</password>
<hostname>127.0.0.1</hostname>
<port>20000</port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow>
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>
</newcamdserver>
</newCSconfig>
============================================
La Azboxul meu ma conctez printr-un rooter cu ip 192.168.0.1, iar boxul are ip 192.168.0.100.
Cand pun in browser 192.0168.0.100:8080, spune ca nu-l vede.
Ce nu e-n regula?
crisz
04-10-11, 16:18
Salutare,

Pina acum s-a activat cu mgcamd 1.34d si newcs 1.6.13 si setarile pentru newcs.xml de la userul qwess ( sa traiasca ! :clap: ) .

Am incercat si pe tvr1, 2 ..... degeaba , am instalat si mgcamd 1.35 :dance: dar degeaba.
Ma ajuta cineva cu vre-o "alifie" :oops: , o setare ceva...
M-as risca sa incerc cu OSCAM dar nu prea le am, si totusi ma gandesc ca daca a mers cu mgcamd pina acum de ce draq sa nu se mai activeze :thx:

Multumesc frumos

crisz
qwess
04-10-11, 17:38
incearca o pornire din telnet.
daca nu o ia trimite-mi o linie N din newcs
adauga in newcs.xml:
<user>
<status>access</status>
<name>autvr</name>
<password>autvr</password>
<hostname></hostname>
<port></port>
<au>on</au>
<spider>No</spider>
<allow>upper</allow> #device name la cardul tvr
<sidoverride>off</sidoverride>
<rate>2</rate>
<cardlevel></cardlevel>
</user>

si trimite-mi in pm coordonatele, sau daca nu posteaza mg.cfg sa vedem de ce nu vrea.
crisz
08-10-11, 15:19
1. Pentru Qwess - I-ti multumesc pentru raspunsul prompt si la obiect dar din pacate am fost nevoit sa plec pe meleaguri Buzoiene unde din pacate


nu am internet.
2. I-mi cer scuze pentru ca am lansat intrebarea si am plecat , dar am fost nevoit.


Intre timp ce butonam cu transferul unor fisiere ( cu FileZilla ) pe AZbox-ul meu l-a luat capul si s-a gindit el sa faca update la sw si a trecut


la meditel-1.0.20, norocul meu ca nu l-am oprit.


Pentru Qwess, eu cred ca m-ai luat prea repede cu "trimite-mi o linie N din newcs" :oops: ! Am uitat sa mentionez ca nu le am deloc cu Newcs,


Mgcamd, CCcam si alte PLUGINU-ri si cu editarea fisierelor pentru configurarea lor, poate este greseala mea si trebuia sa postez la COLTUL


"PUFANULUI" :baby:( mea culpa ).




Acum stam asa :


Resetat !


Transfer fisiere :


Mgcamd 1.34d
Newcs 1.6.13
Multicas 1.62E


Dat permisiune 775 la PLUGINS !
Setat pe TVR1


.......SI ASTEPT.....!




Multumesc !

:drinks:
qwess
08-10-11, 17:38
ok,....dar sa nu astepti prea mult:)
vezi postul din 10.06.10!
crisz
08-10-11, 18:02
Gata..... dupa circa 20 de minute cu mgcamd si newcs activate nu s-a facut lumina !

Am activat multicas si dezactivat mgcamd si am imagine ok pe tvr 1,2 HD :clap:

Am totusi o intrebare : cum vad cand expira cardul pentru ca in multicas la "Slot 1 information" nu apare nimic si nici pe tasta >> :?:


Multumesc frumos
qwess
08-10-11, 22:32
incearca in browser:

http://user: pswd@ip.azbox:8080 (http://user:pswd@ip.azbox:8080)

ex:
http://newcs:newcs@192.168.2.2:8080
crisz
09-10-11, 16:48
Multumesc pentru raspuns dar primesc o eroare ca nu gaseste adresa respectiva.
O sa mai incerc miine, am editat si openxcas.conf :

a)Pentru ecm :
[module]
name = MultiCAS
daemon = emu_module
version = 1.62
INFO = /tmp/ccc_ecm.info
REFRESH = 3
b)Pentru lista cartele :
[module]
name = MultiCAS
daemon = emu_module
version = 1.62
INFO = /tmp/ccc_card_list.info
REFRESH = 3
c)Pentru lista servere :
[module]
name = MultiCAS
daemon = emu_module
version = 1.62
INFO = /tmp/ccc_serverstatus.info
REFRESH = 3
d)Pentru cartela in slot interen :
[module]
name = MultiCAS
daemon = emu_module
version = 1.62
INFO = /tmp/card_slot.info
REFRESH = 3
Restart multicas si apasati tasta >> .

dar degeaba, nu apare decit un tabel dar fara informatii :!:



O seara buna
qwess
09-10-11, 18:35
nu ai nici o treaba cu multicas(openxcas.conf),pentru a vedea entitlements la tvr, le vezi in newcs log sau webif http;
in newcs.xml din /EMU/OpenXCAS/newcs/ verifica liniile httpd daca sunt active si cu ce parametri:



<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>


cu newcs pornit intri in firefox, IE sau ce utilizezi si bagi adresa de la box intrare 8080 cu acces la newcs si paswd: newcs, daca nu vrea, posibil sa fie structura .xml deteriorata.