AZBOX HD PlugIns [Archive]

istvan

07-09-09, 07:22

Monkus OpenXCAS Tools 1.3:
- AzBox HD Backup v0.93 (UPDATE)
- AzBox HD USB Mount Script v2.2 (UPDATE)
- AzBox HD USB Background Copy Script v1.3 (UPDATE)
- AzBox HD SwapOn v1.0 (NEW)

ChangeLog (From 1.2):

# AzBox HD Backup v0.93:
# - backup.list change (from /EMU to only /EMU/OpenXCAS[2]) cause archive size
# - writing all buffered filesystem blocks to disk before reboot
# - some warnings in restore.sh script
# - possible to choose archive to restore (./restore.sh /path/to/archive.tar)
# - compatibility with azbox webinterface (by koivo, joseba)

# AzBox HD USB Mount Script v2.2
# - small probe hack to mount some usb devices with isofs (secondary root)
# - compatibility with azbox webinterface (by koivo, joseba)

# AzBox HD USB Background Copy Script v1.3
# - check, if usb device exists
# - compatibility with azbox webinterface (by koivo, joseba)

# AzBox HD SwapOn v1.0
# - new plugin to add more total memory using swap
# - possible to choose swap device (usb device or internal hard disk)
# - possible to choose swap size (100MB is fine)
# - compatibility with azbox webinterface (by koivo, joseba)

istvan

10-09-09, 07:16

WEB IF Ver.1.2 © 2009 - Telesat Team
FIX : Compatibility with older FW , 0.92880 or lower.

mabutiako

10-09-09, 21:16

apare tot ca v1.0, si dupa restart, nu 1.2

istvan

14-09-09, 06:47

Change cccam mgcamd

trying to create a script to change during the operational to the cam.
Unfortunately I am not yet succeeded.
I noticed that a start in the telnet does not work, if the cam is not in the autostart.
can you help me?

cccam_ modul

openxcas.conf

Code:
[module]
name = CCcamCAS
daemon = cccam_module.sh
version = 1.00
api=yes
wait =10sec
cccam_module.sh

Code:
#!/bin/sh
killall -9 cccam_module &
killall -9 mgcamd &
sleep 2
rm -rf /tmp/*.info* /tmp/*.pid*
sleep 5

cd /EMU/OpenXCAS/CCcamCAS
./cccam_module &

mgcamd

openxcas.conf

Code:
[module]
name = mgcamd
daemon = mgcamd.sh
api = yes
wait = 15sec
version = 1.32
# argument = -a 3

mgcamd.sh

Code:
#!/bin/sh
killall -9 mgcamd &
killall -9 cccam_module &

sleep 2
rm -rf /tmp/*.info* /tmp/*.pid*
sleep 5

cd /EMU/OpenXCAS/mgcamd
./mgcamd &

istvan

18-09-09, 07:11

A new plugin for our AzBox HD.

What is it?

-------------

This plugin allows your AZBox HD to download updated SoftCam.Key & constant.cw

from remote server.

You don't need any more to download updated keys and send them to the box by

using FTP connection.

How to

------------

Create a new folder in /EMU/ called TechSatAZHDKey

Copy TechSatAZHDKey in /EMU/TechSatAZHDKey/.

Change Files Attributes to 755 (both). Change the .cfg of your favorite EMU

to make possible the reading of the keys.

Exit DCC.

Push Home button in your AzHD remote and go to Installed Plugins.

Select TechsatAZHDKey and press Ok.

That's all.

Just close black screen after few seconds by pressing Exit and... Enjoy.

Why install this plugin?

-----------------------------------------------------------------------------

Because SoftCam.Key & constant.cw is automatically generated from

TechSat Maker keys DataBase, updated in real time!!...

Thanks TechSat Team

istvan

20-09-09, 09:19

un skin dragut
http://img19.imageshack.us/img19/265/menusetup.jpg (http://img19.imageshack.us/i/menusetup.jpg/)

http://rapidshare.com/files/282217155/skin.rar

instalare:

1.telnet azbox
2.comanda :
mount -o remount,rw -t ext3 /dev/hda1 /MMP
3. se poate dezarhiva in azboxba.
4. si poate veni curentu!

istvan

21-09-09, 07:05

Monkus OpenXCAS Tools 1.4:
- AzBox HD Backup v0.93
- AzBox HD USB Mount Script v2.2
- AzBox HD USB Background Copy Script v1.4 (UPDATE)
- AzBox HD SwapOn v1.0

ChangeLog (From 1.3):

# AzBox HD USB Background Copy Script v1.4
# - fixed bug during copying data from usb2 to usb1 device

Looking for stable SKY DE/IT HD Channels N Lines for testing purposes (small traffic). Thanx in advance.

istvan

01-10-09, 06:27

http://img3.imageshack.us/img3/8250/61240capture002122257lo.jpg (http://img3.imageshack.us/i/61240capture002122257lo.jpg/)

http://rapidshare.com/files/287139594/ilje_-_blue.MMP.rar

istvan

21-11-09, 07:12

TechsatAZHDKey Plugin

istvan

22-11-09, 08:25

nabilosat forum

istvan

22-12-09, 07:51

* AZBox plugin: TeChSAt_AZK beta0.9 *
* *
************************************************** ****************************
What is it?
------------
This plugin allows your azbox HD download files
Key.bin & new_biss.key updated directly from the remote server.

how to put the plugin:
---------------------------
- Unpack / copy
folder TeChSat_AZK in the folder: / PLUGINS
set to 755 to file TeChSat AZK

how to launch the plugin:
---------------------------------
- Disable MultiCAS
- From the Settings menu -> plugins -> TeChSat_AZK
- Restart reactivate MultiCAS

Why install this plugin?
-------------------------------------------------- ---------------------------
Because the files are generated automatically by
Database keys Maker TechSat, always updated in real time!

note:
in this beta version does not appear
info screen.
Each process is shown on the AzBOX display

istvan

28-12-09, 12:34

TeChSat_AZK v1.0 - TechSat TEAM
==================================
We present the first official version of our plugin for TechSat_AZK azbox.
With this plugin you can download and install automatically files Key.bin and new_biss.key always updated with the latest keys to work.

This plugin is dependent MULTICAS therefore to use it you must also install the plugin OpenXCAS.

Edit the file and add the url plugins.conf http://techsat.info/AZPlugins example:

Code:
[SERVER]
PLUGINS_SERVER_1=http://azboxworld.com
PLUGINS_SERVER_2=http://techsat.info/AZPlugins
PLUGINS_SERVER_3=http://islaremota.com
PLUGINS_SERVER_4=http://azupd.com
From this moment you can automatically install the plugin TechSat_AZK and others may be available directly from the server TechSat
http://img121.imageshack.us/img121/7415/16ks4n7.jpg (http://img121.imageshack.us/i/16ks4n7.jpg/)

melcug

29-12-09, 21:19

Un font care poate fi utilizat in AZBox (recomandat de unii utilizatori) este X360.ttf.
Am inceput modificarea acestuia, in special pentru subtitrare, iar mai jos va prezint a doua versiune a fontului XBOX360M.ttf.

Instalare: Cu MaZ v2.3, in Telnet montati /dev/hda1 read-write, in FTP copiati fisierul XBOX360M.ttf in /MMP/hd/System/font, in Font1.ttf symbol link catre XBOX360M.ttf, iar la final in Telnet montati /dev/hda1 read-only.

http://img407.imageshack.us/img407/5994/tvrhd.jpg (http://img407.imageshack.us/i/tvrhd.jpg/)

http://hotfile.com/dl/22267131/aebd050/XBOX360M_v1.0.1.rar.html

istvan

13-01-10, 16:07

TeChSat_AZK v.1.1

We present version 1.1 of our plugin for TechSat_AZK azbox.

With this plugin you can download and install automatically files Key.bin and new_biss.key always updated with the latest keys to work.

This plugin is dependent MULTICASA therefore to use it you must also install the plugin OpenXCAS.

With this version you can view the channels contained in two rows of keys with an indication of coding, channel and satellite.

There are 4 methods of installation:

1) Edit the file and add the url plugins.conf http://techsat.info/AZPlugins example:

Code:

[SERVER]
PLUGINS_SERVER_1=http://azboxworld.com
PLUGINS_SERVER_2=http://techsat.info/AZPlugins
PLUGINS_SERVER_3=http://azupd.com
PLUGINS_SERVER_4=http://azupd.com

From this moment you can automatically install the plugin TechSat_AZK and others may be available directly from the server TechSat.

2) Copy the content of TechSat_AZKV1.1.plugin.zip in / tmp to the receiver and proceed with the installation to install (/ tmp / plugins.lst).
The remote control: HOME => Plug-ins => YELLOW button => Install (/ tmp / plugins.lst)

3) Copy the content of TechSat_AZKV1.1.plugin.zip in own pen-drive and proceed with the installation to install (USB).
The remote control: HOME => Plug-ins => YELLOW button => Install (USB)

4) Copy the content of TechSat_AZKV1.1.file.zip in the / plugins / receiver.

TechSat Team

istvan

25-01-10, 07:20

We present version 2.0 of our plugin for TechSat_AZK azbox.

With this plugin you can download and install automatically files Key.bin and new_biss.key always updated with the latest keys to work.

This plugin is dependent MultiCAS therefore to use it you must also install the plugin OpenXCAS.
News

- Added download softcam for MGcam and CCcam and consultation on the channel visible.
- Added the ability to view directly into the plugin through the bulb, the state of the cam:
Bulbs on = Cam Activated
Bulb off = Off Cam
Bulb off with Cam X = not installed

There are 4 methods of installation:
1) Edit the file and add the url plugins.conf http://techsat.info/AZPlugins example:

[SERVER]
PLUGINS_SERVER_1=http://azboxworld.com
PLUGINS_SERVER_2=http://techsat.info/AZPlugins
PLUGINS_SERVER_3=http://azupd.com
PLUGINS_SERVER_4=http://azupd.com
From this moment you can automatically install the plugin TechSat_AZK and others may be available directly from the server TechSat.

2) Copy the content of TechSat_AZK-V2.0.plugin.zip in / tmp of the decoder and proceed with the installation to install (/ tmp / plugins.lst).
The remote control: HOME => Plug-ins => YELLOW button => Install (/ tmp / plugins.lst)

3) Copy the content of TechSat_AZKV2.0.plugin.zip in own pen-drive and proceed with the installation to install (USB).
The remote control: HOME => Plug-ins => YELLOW button => Install (USB)

4) Copy the content of TechSat_AZK-V2.0.files.zip in the / plugins / receiver.

istvan

23-02-10, 09:59

***DeformCCC ver 1.ab
improvements:
--more stable than ver 1.aa
--fakeroot was edited for better decoding performance
--unnecassary files were deleted
--handler v1.ab was added
--with handler cccam has beter performance for first decoding and give ecm information from dvbapi_module
--easy to install
thanks for hfmls
***DeformCCC ver 1.ac
--CCcam.prio and CCcam.channelinfo supporting has been added
--dvbapiCAS and DeformCCC have collected in a file in archive file
--to install easyier than ver 1.ab
********How to Install***********
--copyDeformeCCCV1ac.tar file to your main directory(/)
--if you have dvbapiCAS give that command "rm -r /PLUGINS/OpenXCAS/dvbapiCAS" and "rm -r /PLUGINS/OpenXCAS/DeformCCC"
-- go to / dircetory with "cd /" give tar xf DeformeCCCV1ac.tar commands
--add dvbapiCAS your module.soq file and open it after that disable Multicas
--change CCcam.cfg file under cccam directory and give file permission as 755
--add your prio and channelinfo file under cccam directory
--open dvbapiCAS your openxcas menu and they should be active
...DeformE

http://www.mediafire.com/file/zyywymqn5zo/DeformeCCCV1ac.rar

istvan

11-03-10, 07:26

http://img32.imageshack.us/img32/4313/17128063.png (http://img32.imageshack.us/i/17128063.png/)

istvan

16-04-10, 07:36

Azmail 1.1 - Mail client manager

Mail client manager for azbox

How to install:

download and unzip the archive into a folder

copy the contents of the decompressed folder in pen drive or the temporary folder dell'AZBox.

go nalla window plugins and press the red button for add

select azmail and wait.

After installation, find azmail list of plugins installed.

Throwing a window where you can enter our e-mail account.

I tried with a mailbox of Virgilio and it worked without problems.

Have fun all

http://www.megaupload.com/?d=ZCBSTD9K

qwess

16-04-10, 22:06

tks@karbit

1 Install "setup.exe Fausto v1.43 Windows on a PC.
2 Insert FTP files "cccam.cfg" and "newcamd.cfg in AZbox folder / plugins / OpenXCAS / MultiCAS (NOTE: prior to insertion in each file set the IP address that has a PC, that is where all writes N: 192.168.xy type IP address of your PC)
3 Insert file "FaustoServers.cfg in the following sub-folder on the PC where the installed Fausto (C: Program FilesFaustoEMUCardServer) (NOTE: prior to inserting the file set the IP address that has a PC, that is where all writes N: 192.168.xy enter the IP address of your a PC)
4 Unpack the archive "Fausto keys.zip" and put all files in the following sub-folder on the PC where the installed Fausto (C: Program FilesFaustoKeys)
5 Fausto Start by clicking the icon on the desktop PC.
6 Select Tools ->; Emulator ->; Server ->; Manager, click the Load and Start.
7 TAB select Monitor, click on the folder icon with the green arrow to enter the path to KEYS.BIN file (C: Program FilesFaustoKeys)
8 Make a MultiCAS restart to connect to the server Fausto.
9 Switch to a channel package from CanalDigitaal (19.2E), for example. Film1.1, TMF, RTL4, and so on. and will open it immediately. In addition to the package, opens the new Cy (13E) channels as well as Bulsatcom (39E) + Arena Sports 1-4. Note: Cyprus Cy new channels at any time change the keys and see them on the homepage and manually add in Fausto Emulator.
traducerea din sarba in engleza by google
DOWNLOAD (http://www.fileshare.ro/4434060369.24)

http://img691.imageshack.us/img691/4826/capturn.png

qwess

09-05-10, 11:07

Version 1.0 features:
- POP3
- SMTP
- Keyboard support
- Support for most charsets
- Support for TLS
- Support for SASL
- Detects some domains and configures them automatically (hotmail.com, gmail.com, yahoo.com, and others)
- Saves up to five accounts
- Manual configuration of e-mail account
- Reads Messages in plain text only (html and pictures not supported)
- Possible to delete messages
- Able to send messages
- Other small features

DOWNLOAD (http://www.fileshare.ro/4935876917.44)

istvan

05-07-10, 07:26

Priority Manager v1.6
-----
NEW: Fine tune for the channel switching times.

NEW: Reset all system passwords from user interface.

NEW: Automatically change PriorityManagerSettings.txt format to unix againist accidentally
being saved in DOS format by user.

NEW: Priority Management feature can be turn on and off from user interface or direcly
from PriorityManagerSettings.txt .

NEW: DYNAMIC_SLEEP, MAJOR_SLEEP_TIME, MINOR_SLEEP_TIME parameters are added. You can
change this parameters in PriorityManagerSettings.txt if you are not satisfied with (or
have problems with) Priority Management feature. This gives you more control over Priority
Management.

NEW: DOM Speed Increading feature can be turn on and off from user interface or direcly
from PriorityManagerSettings.txt .

NEW: Added support for mounting CIF and NFS shares of same file server at the same time .

FIX: Clicking a button in user interface sometimes shows empty output.

FIX: Wrong documentation saying that enabling CRON feature requires enabling BusyBox
feature. In fact, /PLUGINS/PriorityManager/busybox is directly called by Priority Manager,
so if you want you can disable BusyBox feature while using CRON feature.

http://rapidshare.com/files/404968187/Priority_Manager_v1.6.zip.html

istvan

19-07-10, 07:41

http://img829.imageshack.us/img829/5250/99280977.png (http://img829.imageshack.us/i/99280977.png/)

v1.7
-----
NEW: Added KILL_TV_EMU and WAIT_SECONDS_BEFORE_KILL options to PriorityManagerSettings.txt.
When KILL_TV_EMU is activated, all TV and EMU applications are automatically killed after
switching to movie, rss or browser menus. with this feature, your box will have more free
system resources (both processing power -CPU- and RAM) for playing higher bitrate movies
or browsing the internet.

NEW: Added "Movie & Browser" button to user interface. If you don't want to use "Auto
Kill TV-EMU" feature activated by KILL_TV_EMU option, you can use "Movie & Browser"
button to kill TV and EMU applications before watching a very high bit rate movie file.
TV and EMU applications will be automatically restarted after swithcing back to TV menu.

NEW: "Hidden Channel List" button now doesn't need to reboot the box.

NEW: "Default Channel List" added. So you don't need to reboot the box to activate default
channel list.

NEW: Azbox settings file (selene.conf) is included in both "Default Channel List" and
"Hidden Channel List" packs. So you can define and use different settings (ie. volume,
parental lock setting, last switched channel, etc..) for each channel lists.

NEW: OSCAM EMU prioritization. (Thanks to Alex-1 for the information!)

NEW: OpenVPN prioritization. (Thanks to banditus for the information!)

NEW: Decreased CPU usage of PriorityManager.sh (Its priority is decreased and default
MINOR_SLEEP_TIME value is set to 3.)

FIX: HDD not sleeps when reserved programs are waiting to be recorded. Previous fix made
in v1.4 was not enogh. But this time the problem is completely fixed (Thanks to Alex-1
for the bug report and fix tests!)

http://rapidshare.com/files/407688085/Priority_Manager_v1.7_by_Buyukbang.rar.html
http://www.megaupload.com/?d=Z0M6PBH6

istvan

31-08-10, 08:58

Hello again.

This is my second developement for you.
It's a remote control for your Azbox HD Elite / Premium Satellite Receiver. It works over the telnet protocoll. For now it's only in german, but I think everyone is able to control the software.

For writing text, simply open the software keyboard and start writing...

It's written for devices with wvga-resolution. I tested it on my HD2 and it runs very fine with it.
Here's a screenshot:
http://img819.imageshack.us/img819/5099/screenywn.jpg (http://img819.imageshack.us/i/screenywn.jpg/)

Enjoy this release and please report any bugs and language errors (in the description=)!

qwess

05-09-10, 13:03

MountingWizard v.1.3 by Daniel
mount-NFS şi SMB servere in AZBox(Auto-start)
Extrageti fişierele din"MW.zip" şi copiaţi cele două fişiere in folderul tmp / prin ftp si instalati din Meniu.
changelog:

-----------------------------------------
v1.1
New version with a bug fixed.
- user and password are now possible to modify on samba.

-----------------------------------------
v1.2
New version with capability to add folders inside local system folders.

-----------------------------------------
v1.3
New version with improvements and bugs fixed.
- few modifications on the interface.
- internal code improvements.
- bug that appeared when initializing nfs or samba with folders added to system folders.
exemple settings:
Local Folder = Download
Folder on Local = Filme_SMB(se creeaza prin FTP sau telnet /DATA/hdb1/download/Filme_SMB)
Ip address = 192.168.X.XX adresa IP server(PC)
Remote Folder = Filme( se partajeaza in prealabil pe PC)
User = user logare PC
Password = parola logare PC
Activate now = se bifeaza
SAVE, restart AZBOX, verificare in Manager Fisiere/cale mount-SMB ori FTP.

pentru functionarea in NFS este necesar server NFS pentru O.S./PC

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.fileshare.ro/9990716961.25)

istvan

10-11-10, 07:09

DDamir Subtitle Player 3.01

This plug in gives you possibility to get all informations about movie, either by manually specifying title to search on IMDB, or by simply selecting it from EPG list. If submitted title is not original, plug in will automatically display original title along with detail information about the movie (cast, goofs, comments, plot..).
Once you decide to watch the movie, if you don’t have subtitles you can download them directly from internet for the language you previously selected in plug in settings. It uses three subtitles databases:

podnapisi.net
titlovi.com (ex-yu and eng.lang.)
Perfect DTC database
Once you’re finish downloading you can run the title and fine tune it’s timings by using shift functions.

Requirements:
This plugin was developed for Satellite receivers with Enigma 2 images.

Features:
- IMDB search
- full EPG integration
- multilingual interface
- search, download and running subtitles (SRT/SUB/DTC)
- manual fine tuning of subtitle speed
- subtitle display options (with or without background)
- subtitle files explorer

New in version 3.01:

fixed and improved IMDB support
new plugin layout
plugin optimization
[Subtitle Player 3.01 IPK mips py2.6 (python 2.6 OE1.6)]

Diablo1

22-01-11, 09:13

enigma2-plugin-extensions-softcammanager_0.1-r0_mipse

Dowload (http://www.netuploaded.com/682maz9g4dwf/enigma2-plugin-extensions-softcammanager_0.1-r0_mipsel.zip.html)

vandam

07-03-11, 00:43