Hadu - CCCam

[melting]

http://www.easy-share.com/1906153290/Hadu - CCCam DVB plugin - v Beta 0[1].100.rar


[Serv_1]
Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword

[delta2k2]

Link Direct (http://sateliti-upload.info//index.php?action=downloadfile&filename=Hadu_CCCam_DVB_plugin_Beta_0[1].100.rar&directory=DVB%20Cards&)


.

[fery21]

aici (http://sateliti-upload.info//index.php?action=downloadfile&filename=Hadu-CCCamDVBplugin-vBeta0[1].100.rar&directory=DVB Cards&)

[Snow]

daca dai click pe Link Direct (http://sateliti-upload.info//index.php?action=downloadfile&filename=Hadu_CCCam_DVB_plugin_Beta_0%5B1%5D.100.rar&directory=DVB%20Cards&) iti da acelasi lucru. nu era o intrebare pusa de delta2k2 (http://www.sateliti.info/member.php?u=3916)

[gigelsat]

Se pare ca asta chiar merge.

[gigelsat]

Pentru ca am fost contactat pe pm de colegi care nu au reusit sa porneasca acest hudu-cccam, fac aici precizarea care de altfel este explicita mai sus ca linia de la flaycccam nu se potriveste exact aici ci are o forma putin modificata:

la hudu e asa:

Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword


la flayccam ar fi asa:
C: MyServer.com 12000 MyUsername MyPassword

Deci sunt exact aceleasi elemente, doar ca trebuie puse putin altfel.

[delta2k2]

O nouă versiune , Beta 0.101

Pentru download direct apasă AICI (http://sateliti-upload.info/index.php?action=downloadfile&filename=Hadu_CCCam_DVB_plugin_Beta0.101.zip&directory=DVB%20Cards&)

Changelog :

-new modification to process NDS/Videoguard ECM still a bit faster. Be sure to use and to configure correctly your DVB application, in order it can deliver one TS at a time to its plugins (i.e. packet size=184 bytes). And always uncheck the "Log Messages" menu in case NDS/Videoguard ECMs, if you don't want to get glitches,
-modification to allow the "special" NDS/Videoguard ECM process, in case of DVBCore plugin,
-several fixes concerning the multi-servers feature,
-fixes for incorrect ECM results display and Server infos display, in different cases,
-bug fix if no ECM stream present for a valid PID declared into PMT,
-a few minor enhancements: explicit message when the same server ( = same IP address and same port) is already in use, Server infos window no more centered for each subsequent calls, ...
-correction when stopping and restarting a server while being on an encrypted channel,
-start/restart process enhanced. After 3 consecutive negative tries, the restart process is made: 1 second, then 2 seconds, then 4 seconds, ... then 32 seconds later; with a maximum of 32 seconds between each restart call. However, a manual start is always processed immediately, regardless of the current delay between 2 restart calls,
-various internal bug fixes and minor modifications,
-complement of informations in some parts of the readme.txt file.



.

[delta2k2]

O completare :

in noua versiune a fişierului Hadu.ini , lipseşte opţiunea [Serv_1] , care preceda linia de configurare. Fără această opţiune , pluginul este activ , dar nu comunică corect cu serverul de CCcam.
Deci , fişierul Hadu.ini trebuie să arate in felul următor :


[General]
PluginActive=1
KeyPath2=

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
UseDVBTime=1
MaxECMPIDs=4
MaxConnections=4
LogMessages=0
LogMessLevel=1

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_1]
Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword


Desigur , la ultima linie (cea cu Server=CCCam: ...) fiecare işi pune setările personale.

Varianta mai simplă ar fi să păstraţi vechiul fişier Hadu.ini


.

[melting]

Hadu - CCCam DVB plugin - v Beta 0.102


http://www.fileshare.ro/1266740677.85


0.1.0.2:
-correction concerning the internal CSA support (DVBViewer plugin). Don't use it unless absolutely necessary, especially for HD channels. Prefer the CSA.dll/FFDeCSA.dll (both of them) instead (see DVBViewer section),
-bug fix for incorrect accepting of some certain kind of nodes.

[disat]

nu merge ir''to:!:

[melting]

Hadu_CCCam_DVB_plugin_beta0.104



http://www.flyupload.com/?fid=561527530



0.1.0.4:
-another modification concerning the "wrapper" applications like SSSP Plug, ... Remember to set "UsePSITables=0" (or uncheck the corresponding menu entry) and "ECMTimeOut=12" (for instance) for these applications.

0.1.0.3:
-DCWs display added into the CAID list. This display corresponds to the last DCW(s) received; which doesn't mean necessarily the current one(s),
-all the windows of the plugin can now be minimized (and restored). The "Monitor" and "Server Infos" windows are also now resizeable (only the horizontal sizing is used; mainly to have a wider area for the lists of data),
-choice to display IP Address or URL in the Server list has been added. The default option is still to display the IP Address (see DisplayIPorURL option),
-the refresh time for the Server infos has been set to 4 seconds,
-bug fix concerning the node disconnection treatment,
-still another bug fix for incorrect accepting of some certain kind of nodes,
-an ECM timeout option has been added (see ECMTimOut option). It's mostly to be used with "wrapper" applications like SSSP Plug, ... As I cannot test these kinds of application, I don't know if this feature is sufficient to make my plugin compliant with them,
-node ID display added into the nodes list (last columns)

[delta2k2]

O nouă versiune , Beta 0.105

Pentru download direct apasă AICI (http://www.sateliti-upload.info/index.php?action=downloadfile&filename=Hadu_CCCam_DVB_plugin_0.105.zip&directory=DVB%20Cards&)

Bug fix for Cryptworks "long" ECMs (for Digiturk mainly)


.

[melting]

Versiune noua .......:cheers:


Download (http://sateliti-upload.info//index.php?action=downloadfile&filename=Hadu_beta_0.107.rar&directory=DVB%20Cards&)


0.1.0.7:
-bug fix for a incorrect CAID selection process, introduced into the 0.1.0.6 version. It mainly concerns all the Seca providers (but could have a negative impact for all the others CAIDs too).

0.1.0.6:
-number of disconnections column added into the nodes list,
-"NoNodeCAID" option added, to ignore all the nodes or only one node of a server,
-CAID tunneling added for Betacrypt<--->N3 CAIDs (see "CAIDTunnel" option). Do use CSa.dll and FFDeCSA.dll, if you plan to view Brumiere HD channels with DVBViewer

[melting]

http://www.fileshare.ro/1284591053.2



0.1.0.8:
-the way to ignore/use an available node has changed: right-click now on the node to get the corresponding menu (currently limited to this feature only),
-because of the tremendous number or disconnections/re-connections of some nodes for most of the CCCam servers (especially, but not only, those of version 2.0.11), the restart of the CAID selection process is no more always called. Unless no nodes have been found to decode the current channel; in this last case, the restart is still automatic. In some rare cases, you may have to ask manually to retry all the ECMs,
-Irdeto ECMs are now sent to the CCCam server(s) one at time only (though still currently a workaround),
-a new modification into the CAID selection process, to increase the stability of the decoding process.

[melting]

http://www.fileshare.ro/1293339284.18


0.1.0.9:
-automatic detection for sssp "wrapper" application (if it's called ssspxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). However, you can always force it, using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-modification to stick as tight as possible to the answer of the server(s) concerning the ECM requests. It may have some negative impacts in some rare situations. In these later cases, atop and restart the concerned server connection,
-new modification for Irdeto ECMs. Only the first positive ChID (i.e. available for decoding purposes) is used, after a first test with all of them.

[melting]

http://www.fileshare.ro/1312174483.28




0.1.1.0:
-several modifications for Irdeto ECMs (once more),
-possibility to 'Log a PID' added (within the main menu),
-bug fix for incorrect statistics in case of Irdeto ECMs,
-"WantEmus" option is now relative to accepting or refusing emulators from server(s): default value is 1=Yes,
-bug fixes for CAID and providers associated to emulators,
-some fixes for improper data send by some "wrapper" applications,
-modification into the ECM time out process,
-time response from server(s) added (2 new columns into the "Server Infos" window). Both for returned DCWs and for negative answers (i.e. 'No decoding' messages), there is a first latency for multiple Irdeto ECMs (if several ChIDs are used),
-some fixes for nodes display in case of more than one server active.

[melting]

http://www.fileshare.ro/1316245170.42

0.1.1.1:
-bug fix for providers associated to emulators.

[mario08]

Hadu - CCCam DVB plugin - version Beta 0.112

Changelog:
----------
0.1.1.2:
-bug fix for some CAIDs associated to emulators,
-"NoSID" option added, to ignore one or several SIDs for a server,
-"Enable/Disable (one CAID)" and "Enable/Disable (all CAIDs)" added into the contextual menu for a node (right-click on the node to get the corresponding menu). These menu entries correspond to the "NoNodeCAID" option into Hadu.ini; refer to this option for more details. Note that "Ignore/Use" menu entry is temporary, associated to the current session with the server, and specific to one node. While these two new menu entries are saved (i.e. not temporary), and specific to one server (all the CAIDs for a server = all the nodes belonging to this server) or to one CAID of the server (which may correspond to one or several nodes for the concerned server).

[melting]

link-ul lui mario08 nu mai merge , aveti aici....

http://www.fileshare.ro/1353544841.05

[eagle]

Hadu - CCCam DVB plugin - v Beta 0.113.

Changelog:
- minor modification for the connection time out process,
- priority added: general rules (see "PrioGenRules" option) and CAID/provider
for nodes (see "PrioCAIDProv" option),
-modification to accept connection for CCCam servers v2.1.2.


(http://www.x-sat.org/index.php?action=downloadfile&filename=ISO-8859-1__Hadu%20-%20CCCam%20DVB%20plugin%20-%20v%20Beta%200.113.zip&directory=DVB%20%20Cards/Plugins&)

[johnny29]

Hadu - CCCam DVB plugin - version Beta 0.114

0.1.1.4:
- added the possibility to cancel the temporarily effects of the manual
ECM PID selection within the server menu (i.e. without the necessity
to change or re-select the channel),
- bug fixes inside the node priority process (introduced into version 0.1.1.3).

DOWNLOAD HEREhttp://img291.imageshack.us/img291/1846/downloadnc7.gif (http://www.x-sat.org/index.php?action=downloadfile&filename=Hadu%20-%20CCCam%20DVB%20plugin%20-%20v%20Beta%200.114.zip&directory=DVB%20%20Cards/Plugins&)

[eagle]

Hadu - CCCam DVB plugin - v Beta 0.115
Changelog:
----------

0.1.1.5:
-added the possibility to use an icon for Hadu in the Systray (see "Systray" menu),
-some minor bug fixes,
-automatic detection for Trumanshare "wrapper" application (if it's called trumanxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). As for Sssp, it's always possible to change it using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-fix for a nasty bug concerning the node selection (still introduced into version 0.1.1.3). The start to decode a new channel should be now faster, mostly of the time (but still not faster than your server(s), of course).

http://img200.imageshack.us/img200/6582/downloadbge.gif (http://www.x-sat.org/index.php?action=downloadfile&filename=Hadu%20-%20CCCam%20DVB%20plugin%20-%20v%20Beta%200.115.zip&directory=DVB%20%20Cards/Plugins&)

[melting]

http://www.fileshare.ro/1374735586.58

0.1.1.6:
-added the possibility to modify the maximum number of CAID/node loops (see "MaxCAIDLoops" option),
-bug fix concerning the closing and re-opening of the same ECM PID in some cases,
-bug fix for ECM PID closing requests (not correctly processed in some cases),
-number of timeouts for ECM requests added into the nodes list,
-minor enhancements into ECM request for the same ECM PID.

[melting]

hy all...

Aveti aici un program prin care puteti sa va editati ...Hadu.ini...folosind aceasta noua aplicatie:


Hadu Server Editor
http://www.fileshare.ro/1376954498.64


Hadu_Help ...movie
http://www.fileshare.ro/1376964994.2


La cei care nu va porneste programul vedeti sa nu aveti lipsa fila cu rosu..daca nu instalati ..libraryfiles.exe...link de mai jos

Windows XP:
regsvr32 \windows\system32\COMDLG32.OCX

http://www.ascentive.com/support/new/libraryfiles.exe

[melting]

Hadu - CCCam 0.1.1.7

http://www.fileshare.ro/1502128341.61


Bug fix concerning the trouble for the first of the DCW in case of DVBViewer and NDS/Videoduard encrypted channels (first decoding for the channel too long in this case).

[melting]

http://www.fileshare.ro/1529371287.4



0.1.1.8:
-left double-click on icon in Systray displays the Monitor window,
-workaround for Trumanshare "wrapper" application, which sends TS data with an incorrect length,
-maximum value for ECMTimeOut option has been increased to 120 seconds,
-PMT PID is displayed within the Monitor window (just before the status of the PMT),
-decrypt cyphered subtitles when used as a DVBViewer plugin (DVBViewerAllAudio=1 is required),
-bug fix concerning Irdeto ECMs with a lots of ChIDs,
-TimeRecon option added, for re-connections. It is recommended not to modify the default value for this option.

[melting]

Hadu - CCCam...0.1.1.9

http://www.fileshare.ro/1661369253.12


-automatic detection for sssp "wrapper" application (if it's called ssspxxxxxx.exe). In this case, the command to return DCWs to the application is modified (i.e. $0410 instead of $0700). However, you can always force it, using the "DescrCommand" option into the "[Device]" section of Hadu.ini,
-modification to stick as tight as possible to the answer of the server(s) concerning the ECM requests. It may have some negative impacts in some rare situations. In these later cases, atop and restart the concerned server connection,
-new modification for Irdeto ECMs. Only the first positive ChID (i.e. available for decoding purposes) is used, after a first test with all of them.

[DoeDany]

Am o placa SkyStar2 totul merge ok in schimb am ceva probleme cu hadu .Folosesc Hadu v Beta 0.118 cante odata mi se conecteaza pentru putin moment dupa care se intrerupe No PMT looking for PAT apoi No Frame si nu se mai conecteaza .Trebuie sa inchid si sa redeschid ProgDVB.
Daca ma poate ajuta cineva si pe mine las un ID de messenger : drloveyou_2005@yahoo.com

Va Multumesc

[melting]

http://www.fileshare.ro/1801098167.44


0.1.2.0:

-bug fix for the "DVBViewerRecServ" option when set to 2 (always active),
-bug fix for incomplete server disconnections (if provoked by the server).

[melting]

Hadu - CCCam 0.1.2.1


0.1.2.1:

-bug fix for some incorrect connections in some cases.

http://www.fileshare.ro/1846490373.01

[melting]

HaduSer version 1.000


Introduction:

HaduSer is a tool for Hadu (a CardSharing Client plugin for
DVB softwares on PC using DVB TV-Cards with Windows Vista or Seven.


http://www.fileshare.ro/1851543804.5

[melting]

Hadu - CCCam 0.1.2.2:



-Workaround for CCCam version 1.2.3. Hadu is now considered back as a 2.0.11 version client by default. Furthermore, it's possible to modify the client version sent to the server (see "Version" option).


http://www.fileshare.ro/1985993380.85

[skycleaner]

Eu nu reusesc deloc sa le fac sa mearga...

[melting]

Eu nu reusesc deloc sa le fac sa mearga...

Este usor de pornit, ai 2 fisiere --- Hadu.dll si Hadu.cfg astea 2 trebuie copiate in Plugin sau pot fi puse direct la radacina... Exemplu - progdvb/plugin sau direct progdvb/


In Hadu.cfg se editeaza 1 linie manual...sau foarte usor cu Hadu Server Editor

[Serv_1]
Server=CCCam:MyServer.com:12000:0:USER:PASS

...linia F cu USER si PASS facuta in Dream / server sa fie activa

[marcghi]

cate servere se pot pune, si se deschid in hadu?

[delta2k2]

Eu am testat cu 5 servere şi nu au fost probleme. Sigur poţi pune mai multe.





.

[marcghi]

intreb pentru ca am pus 8 servere si nu deschide decat 5 maxim. oare asta e limita? multumesc.

[iulian1986]

Se pot adauga 32 de linii, insa nr. maxim de servere active este de 6.

[marcghi]

multumesc, intre timp am mai incercat si deschide 6, dar nu mai mult si acum imi confirmi si tu. bafta.

[delta2k2]

Here are the main current limits applied into the plugin:

-Maximum number of CCCam servers (active or not active): 64
-Maximum number of active CCCam servers : 6
-Maximum number of nodes per server : 2048
-Maximum number of providers per nodes : 16
-Maximum number of hops per node : 8 (though more than 3 or 4 is probably useless)
-Maximum number of CAID/providers entries into to "CAIDProv" and "NoCAIDProv" options : 32
-Maximum number of nodes/CAID entries into to "NoNodeCAID" option : 32
-Maximum number of CAID/CAID/provider/SIDs entries into to "CAIDTunnel" option : 32
-Maximum number of SIDs entries into to "NoSID" option : 64
-Maximum length size for server name and URL/IP address : 128
-Maximum length size for user and password: 20 for the user, 128 for the password
-Maximum number of CAID/providers entries into to "PrioCAIDProv" option : 32


.

[melting]

Hadu - CCCam...0.1.2.3


http://www.fileshare.ro/3844198086.12



-EMM support (still experimental),
-possibility to indicate a static Node ID added,
-ECM process largely modified. If this new version doesn't work properly for you, get back to your former version,
-controls concerning the ECM provider completed,
-default value for the "WantEmus" option is now set to [0=No],
-memory occupation for each server lowered,
-several other bug fixes and minor enhancements.

[melting]

0.1.2.4:
-server build display added (Server Infos window),
-DCWsOneServ general option added (though it's not recommended to change it),
-several bug fixes concerning the connection step. The timeout value for connections is now 3 times the timeout value for ECM receptions,
-changes within the internal events process (clean up and bug fixes),
-NonStd server option added, relative to some CCCam server emulation (i.e. servers with a non standard CCCam server behavior, probably due to a modified software or an emulation). A warning is eventually displayed about possible such kind of servers in the Server Infos window,
-size for Monitor and Server Infos windows saved into Hadu.ini (if changed by the user),
-internal option NoDelay set back to a safer value by default (due to too many crashes or hangs with several DVB applications). You can now remove the "Nodelay=0" configuration line within your Hadu.ini file, if you've set it before,
-reinforcement of the received CCCam data controls,
-modification for the status of the CCCam servers when started (Monitor window),
-simplification concerning the ECM PID selection. If an ECM PID is now forced (using the ECM list into the Monitor window) and if the result is unsuccessful, a full standard retry then occur (i.e. using all the possible nodes and CAIDs, and respecting the priority rules defined). The "Cancel manual ECM PID selection" menu has been removed (no more used),
-support of the main CCCam "checks": commands 05, 0B, ... The former workaround for command 05 checks has been removed. The main check currently occurs after more than 2 hours (i.e. long session),
-a few modifications or adds concerning the informations logged,
-for users using also HaduSer, please upgrade to HaduSer version 1.0.0.2 (or else exchanges with this new version of Hadu is no more possible).

Download aici (http://www.easysurf.ro/xdc6sdepzb0b/Hadu_CCCam_DVB_plugin_beta0.124.rar.htm)

[melting]

Hadu - CCCam...0.1.2.5


http://www.fileshare.ro/5033957460.5

0.1.2.5:
-several major bug fixes, mainly if 2 or more servers are used (but not only),
-correct support of the server rejection for the user connection. Possible error messages returned by the server are now displayed at the bottom at the Server Infos window,
-"IgnoreProvFor" option added, to ignore the provider checks for one or several CAID. It may be needed for instance, if the CAID tunneling feature (Betacrypt<--->Nagra3) is no more working properly in your case (set "IgnoreProvFor=1702" for the concerned server).

[melting]

http://www.easysurf.ro/z0ou349mx37n/Hadu_-_CCCam_DVB_plugin_-_v_Beta_0_1_.126.zip.htm


0.1.2.6:
-temporary workaround for OSCAM servers (see "OSCAMWa" option, and all the comments for it) added as a possible option,
-possibility to have only EMM active added (see "EMMAlone" option),
-the maximum number of providers per nodes has been increased to 40,
-possibility to update more than one card (i.e. node) of the same CAID for EMM purposes added,
-bug fix for nodes with too many providers,
-transparency for Monitor and Server Infos windows added (see "UseTransparency" option for more details),
-"IgnoreProvFor" option now also used for EMMs,
-providers are no more checked for Betacrypt CAIDs (ECMs and EMMs). So, you can remove your "IgnoreProvFor=1702" or "IgnoreProvFor=1722" option lines if you wish,
-bug fix for BetaCrypt EMMs process,
-bug fix concerning the DCWsOneServ option,
-bug fix for the emulator nodes recognizing,
-modification for the non standard CCCam servers and the corresponding "NonStd" option: it's now supposed to work automatically (see "NonStd" option for more details),
-bug fixes concerning different particuliar cases when several servers are in use,
-bug fix for incorrect behavior of server connections when the plugin is deactivated,
-bug fix because current ECMs were not sent immediately when a new server is activated (if several servers are active and at least one is OK),
-by default value has been changed for the MaxConnections and MaxECMPIDs options. You'll have to manually modify your current Hadu.ini file, if you plan to use these new by default values,
-number of active CCCam servers at the same time no more limited to 6 (but still limited to a maximum of 64 CCCam servers, active or not active). Set the new by default values for the MaxConnections and MaxECMPIDs options, if several servers are in use,
-bug fixes for a possible improper re-connection when the disconnection has been provoked externally (network and/or distant server),
-bug fix for Viaccess "long" ECMs (for TNTSat mainly),
-size for Monitor and Server Infos windows now also saved into Hadu.ini (if changed by the user) when pushbutton "OK" is pressed. Furthermore, the size of the columns for the different lists of these windows is now also saved,
-it's now possible to sort the nodes list into the Server Infos window for some columns,
-reject of null DCWs (processed as 'No decoding'),
-some other bug fixes and minor enhancements.

[ionut2]

voua vi se mai conecteaza hadu? ca la mine nu mai vrea

[delta2k2]

Merge fără probleme.
Probabil ai suprascris fişierul Hadu.ini şi ai pierdut vechile setări.



.

[ionut2]

Deci sa scriu cum se manifest ala mine..am incercat de la versiuni mai vechi pan ala 0.1.2.6 tot asa fgec..bag linie valida in ini (car functioneaza pe dreambox) dar acolo cand dau la monitor tot acelasi lucru imi apare indiferent ce linie bag un ip si portu 12001 (xxx.xxx.xxx.xxx:12001 ) apare conecting apoi stopped si tot asa.. are cineva idee ce e cu ipu ala? si inca chestie :chiar adac sterg hadu din plugins el tiot imi apare acolo in viewer la sectiunea plugins .. nust ce draq are numa la mine


.

[piccolo08]

Cred ca folosesti vista sau w7-daca e asa foloseste editor notepad si nu wordpad sau notepad ca altfel nu se aplica modificarea.
Lasi in config doar linia ta nu si alte prostii.

[ionut2]

cu otepad am editat... hai ca las numa linia in ini sa vad ce se intampla si am win xp .. mai demult mio mers fara probl... mi aa cioda ca face skemele astea

[melting]

Poate gresesti ceva cand scri linia in el de aceea e bine sa folosesti :


Hadu Server Editor
http://www.fileshare.ro/1376954498.64

[ionut2]

msi mult melting ,asta era greseala..eu editam dupa formula veche Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword dar vadk editoru face alcumva comanda pt server.. anume [Serv_1] sau [Serv_Myserver1] in loc de [Serv_Dreambox] asa cum era mai demult si eu nu schimbasem ..si mergea asa.. in fine asa e daca nu esti in ton cu schimbarile..

[lao]

Pune asta in care modifici linia ta


[General]
PluginActive=1
KeyPath2=

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
UseDVBTime=1
MaxECMPIDs=4
MaxConnections=4
DisplayIPorURL=1
ECMTimeOut=3
LogMessages=0
LogMessLevel=1

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_ubuntu]
Server=CCCam:att.dns.net:12000:0:user:passw
;
; Sample for a CCCam server
; -------------------------
;
; Server declaration (mandatory) :
; [Serv_whateveryouwishforyourservername]
; Mandatory parameter :
; Server=Protocol:Server:Port:(unused):Username:Password
; Sample: Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
; Optional parameters :
; Active= ; ([1] or 0)
; TimeOut= ; (0=None, or 3-7 seconds. Default is [5] seconds)
; PadTime= ; ([0=None], or (TimeOut+2)-N seconds)
; WantEmus= ; (0=No or [1=Yes])
; MaxHop= ; ([0=None], or 1-N)
; CAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoNodeProv= ; [None] or 32 max entries of Node/Providers
; CAIDTunnel= ; [None] or 32 max entries of CAID/CAID/Provider/SIDs

[alinumik]

poate sunt io mai incet la minte dar nu reusesc nici cum cu hadu, daca poate pune cineva un print screen cum ar trebui sa arate hadu.ini dupa modificare i-as fi tare recunoscator.
Am incercat si cu vplug de vreo saptamana dar am inceput sa imi pierd rabdarea, am luat 100 de softcam.key si pluginuri si nu reusesc sa il fac sa mearga.
Nu am mai folosit placa de vreun an de zile si se pare ca am ramas in urma cu noutatile.
Multumesc si astept suport.

[marcghi]

[General]
PluginActive=1
KeyPath2=

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
UseDVBTime=1
MaxECMPIDs=4
MaxConnections=4
DisplayIPorURL=1
ECMTimeout=3
MaxCAIDLoops=4
LogMessages=0
LogMessLevel=1
Systray=1

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

[Serv_dm500]
Server=CCCam:host.no-ip.biz:12000:0:nume:parola

;
; Sample for a CCCam server
; -------------------------
;
; Server declaration (mandatory) :
; [Serv_whateveryouwishforyourservername]
; Mandatory parameter :
; Server=Protocol:Server:Port:(unused):Username:Password
; Sample: Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
; Optional parameters :
; Active= ; [1] or 0
; Timeout= ; 0=None, or 3-7 seconds. Default is [5] seconds
; Version= ; [None] or Version:Build
; PadTime= ; [0=None], or (Timeout+2)-N seconds
; TimeRecon= ; [0=Automatic], or 1-32 seconds
; WantEmus= ; 0=No or [1=Yes]
; MaxHop= ; [0=None], or 1-N
; CAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None] or 32 max entries of CAID/Providers
; NoNodeCAID= ; [None] or 32 max entries of Node/CAIDs
; CAIDTunnel= ; [None] or 32 max entries of CAID/CAID/Provider/SIDs
; NoSID= ; [None] or 64 max entries of SIDs
; PrioGenRules= ; 1 or several general rules for priority. Default is [HOP]
; PrioCAIDProv= ; [None] or 32 max entries of CAID/Providers for priority
;

la mine asa merge, bineinteles cu hostul, numele si parola corespunzatoare liniei C primita. de asemenea se pot pune mai multe linii dupa acelasi model, din cate am observat maxim 6 linii pot functiona simultan.

[alinumik]

Multumesc lui Melting pt sprijinul acordat si pt rabdarea de a raspunde unor intrebari prostesti.
Aveti ceva nelamuri,... cautati-l pana nu is pierde rabdarea :D


:clap::clap::clap::clap::clap:

[piccolo08]

@alinu...
Nu e vorba de intrebari prostesti ci mai degraba de faptul ca tu nu ai citit cu atentie materialele referitoare la hadu plugin.
Pe viitor pune-ti si tu capul la contribuitie si vei vedea cat de usor este sa configuerezi.
Altfel risti sa te trezesti in ridicol si sa te adaugi si tu celor care le mai ramane de "eliminat gratarul"

[Swerige]

Salut am si eu o problema cu Hadu.Am folosit si editorul pentru linie dar nu se conecteaza,apare conecting, dupa aceea stopped.Cum pot verifica daca linia mai este activa.Si inca ceva NewCamd5.25 la ce foloseste, poate fi utlizat pentru o placa SkyStar?Multumesc

[ombre]

Bun ziua tuturor,

O problema am cu acest cam pe progDVB 6x versiunea gratuita nu merge doar pe versiunea pro! poate cineva sa-mi confirme daca intradevar este incompatibila sau doar doar ceva la setarii reprezinta problema?

Multumesc

[trid_ovi]

hadu 0.127

Changelog:
----------
-(partial) support for DreCrypt EMMs,
-EMM PIDs associated to ECM PIDs (based upon the CAID and provider criteria) are now all displayed into the concerned column ("Monitor" window),
-an option has been added to display all the other EMM PIDs (i.e. EMM PIDS not associated to ECM PIDs; see "DispAllEMMs" option);
-"EMMCAID" option has been extended, in order to include an optional EMM PID (see "EMMCAID" option),
-bug fix for the non correct display of indexed nodes (when the list of the nodes is sorted by user),
-Hadu is considered back as a 2.1.4 version client by default. You can of course still modify the client version sent to the server (see "Version" option),
-minor modification into the possible levels of informations to log (see "LogMessLevel" option),
-display of the "Server Infos" window has been optimized (it's now a bit more reactive, while using less CPU resources),
-an option has been added when Hadu is used within the DVBViewer recording session. It's now possible to start the connection with the server(s) only if the channel is encrypted (see "DVBViewerEncrServ" option),
-support for the new CCCam commands introduced in CCCam version 2.2.0 or above (i.e. commands 0F for the node data, and commands 0C, 0D for the new CCCam "checks"). An option has been added to authorize or not the Node SID assignment/rejection feature present in commands 0F (see "UseNodeSID" option). The Node SID assignment/rejection feature will be activated by the server, only if Hadu is also declared as a CCCam client version 2.2.0 or above (see "Version" option). But, as there is a bug concerning the new CCCam "checks", declaring Hadu as CCCam client version 2.2.0 may conduct to an improper channel decoding (see the new workaround menu "Switch DCW Last Byte"),
-support for the OSCAM Partner handle, and its Node SID assignment/rejection feature (the Extended ECM Mode is also checked but currently not used). Several options have been added to authorize them or not (see "OSCAMPartner", "OSCAMExt" and "OSCAMSID" options). Furthermore, when activated these features are displayed at the bottom of the "Server Infos" window, as for the build of the OSCAM server,
-2 new features have been added: a list of ECM PIDs used (i.e. ECM PIDs cache; see "Hadu-Cache.txt" file), and a list of manual ECM PIDs (see "Hadu-Manual.txt" file). These features may be activated/deactivated directly from the main menu of Hadu (see "Cache" sub-menu, and "CacheUse", "CacheUpdate", "ManualUse" options),
-an new column (title "Opt") has been added in the list of the nodes into the "Server Infos" window (to display eventual additional infos concerning the nodes),
-all the log files (i.e. 'Hadu-Mes.log', 'Hadu-EMM.log', 'Hadu-PIDxxxx.log' and 'Hadu-Dump.txt') are now always put in the same directory as the plugin itself (no more in path indicated by "Keypath2", if this option is used). "Keypath2" is reserved for files possibly shared within several occurs of Hadu (like the files for the ECM PIDs used and the manual ECM PIDs),
-support for Nagra Tiger EMMs,
-TID and SID for the current channel are displayed into the "Monitor" window,
-an option has been added when providers/ChIDs used within CCCam messages are rejected by the server (see "DontUseProvFor" option),
-usual minor bug fixes and enhancements


download:
http://www.girlshare.ro/1871839.2

[delta2k2]

Config Hadu.ini V3.0.0 Beta by FTA Boy

1 - This version using the original hadu.ini.
2 - Can set\change hadu setting (more Features will add soon).
3 - User can enter unlimited clines.
4 - Choose server name for every cline.(use server address + a random number)
5 - Can fill all fields automatically (with new fixes).
5 - 1 You can copy and paste cline at host textbox and program will fill other parameters.
5 - 2 Now in this version you can copy cline with C: or with out it.
* it should have a space character between every part. (C: Host Port Username Password) it doesn't important copy no {0:0:3} or don’t… program will detect them automatically.
6 - Program remember Hadu.ini path, use host name, show/editing mode and settings.
7 - Compatible with Hadu 0.127

[Gabb40]

Salut,
Am un SS HD2 si nu am nici un card, nici interfata pt carduri.
As putea sa folosesc hadu-cccam?
Daca da, mi-ar trebui sa configurez cumva un server pe care sa-l fac sa ruleze in windows sau linux sau trebuie doar sa primesc o linie C?
Daca, din intamplare, primesc o linie C de la cineva, eu trebuie sa-i dau ceva inapoi?
Liniile C le poti primi fara sa dai nimic inapoi?
Folosesc DVB Viewer cu licenta si Windows 7 x64.

[laleauaneagra]

nimeni nu iti va da o linie C doar asa...dar te asigur ca se va gasi cineva sa ma contrazica

hadu e un plugin care te ajuta doar sa primesti...daca cineva iti ofera

tot in aceasta sectiune ai un topic despre hadu ce si cum

doar pe windows

[Gabb40]

Eu ma refeream la faptul daca ar trebui sa am si eu vreun server de unde sa-i dau vreo linie sau ceva date.
Nu stiu nimic despre hadu si cccam.
Eu folosesc gbox, deocamdata.
Ar fi bine sa te "contrazica" cineva. Chiar nu stiu daca e mai bun hadu sau sa continui cu gbox

[laleauaneagra]

ramai pe gbox daca ai inca parteneri

eu ti am zis in sensu ca ma gandeam ca nu ai nici un card....deci nici server nu se pune problema

[georgeion]

V 3.1.4 : fixes
New disguise and fixes.
http://www.mediafire.com/?ueu21bjejg3vd1e

[stupidman]

cei care incercati vizionarea tvrHD cu hadu 1.2.7 sa stiti ca nu merge...nu am o explicatie...dar revenind la 1.2.6 a pornit lejer...
trecerea mea a fost mai demult...asa ca acum la incercarea de a deschide tvrhd am refacut toate readerele si userii, am schimbat progdvb-ul...inclusiv in variante mai vechi...incercand sa vad de ce ....logic...am cam injurat....
o fi luat si asta obiceiul prost al cccamului...ca doar n-o sa dau vina pe maria-sa tvr...
pe celelalte pachete functioneaza corect si aceasta varianta de hadu

numai bine..

[jackuzzy]

Ultima versiune pare a fi 0.1.2.7 >>link (ftp://satinfo:H7KI4*4H%4018Ja@ggwaypoint.com/general/plugins/)<<
Mai multi useri confirma faptul ca TVR HD nu ar functiona.
Sincer, nu am de unde sa stiu pentru ca nu folosesc pc-ul pentru receptie satelit.

Server-ul g (http://ggwaypoint.com/)gwaypoint (http://www.ggwaypoint.com) este server-ul meu si oricine doreste sa urce fisiere pentru a partaja cu alti utilizatori, este bine venit.

Best.

[jackuzzy]

Click aici (http://mystorage.me/public.php?service=files&t=bf00e4ed84ddf083d9d29d513da62d01) sau aici (http://infoquiz.eu/owcloud/public.php?service=files&dir=%2Fadmin%2Ffiles%2Fcccam%20client) pentru a descarca hadu cccam 0.1.2.7 pentru windows. Testat de mine pe DVBViewer si ProgDVB pro.
parola de acces este domeniul forumului.

[jackuzzy]

in comentariul anterior am postat 2 legaturi unde se gasesc clienti cccam printre care si hadu cccam. am adaugat de asemeni utilitarul care va ajuta sa configurati mai usor Hadu.ini .

Sarbatori fericite tuturor.

[bonou2]

ProgDVB 7.29.4 Pro & HADU CCCAM Plugin.rar

https://easyupload.io/w8wds9